Tender For Cable Tray Replacement Work At Msp
Tender Value
31.50 Lakhs
Estimated cost
Bid Submission
06 Mar 2023
0 days left
EMD
31506
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
matikhalo → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Cable Tray Replacement Work At Msp
BOQ
| Sl. No. | Item Description |
| 1 | Unit rate towards Supply of FRP pultruded ladder type cable tray 300 x75 x 75 mm with 3 mm thickness along with coupler plates and accessories like SS304 nuts, boltsand washers as per IS 6746 : 1994 with its latest amendments. The rungs shall be of hollow type with 19mm internal dia along with thermoplastic pin and epoxy adhesives on both sides of the tray. |
| 2 | Unit rate towards Supply of FRP pultruded ladder type cable tray 500 x75 x 75 mm with 3 mm thickness along with coupler plates and accessories like SS304 nuts, boltsand washers as per IS 6746 : 1994 with its latest amendments. The rungs shall be of hollow type with 19mm internal dia along with thermoplastic pin and epoxy adhesives on both sides of the tray. |
| 3 | Unit rate towards Supply of Galvanized cable tray made out of 3 mm thick rolled sheet steel. The cable tray shall be hot dip galvanized as per IS 2629:1989 with its latest amendments with minimum galvanization thickness of 86 microns of size 300x75x75 mm. Test certificates towards galvanization shall be submitted along with supply. The cable trays shall be supplied along with coupler plates and its accessories like SS304 nuts,bolts washers etc. |
| 4 | Unit rate towards Supply of Galvanized cable tray made out of 3 mm thick rolled sheet steel. The cable tray shall be hot dip galvanized as per IS 2629:1989 with its latest amendments with minimum galvanization thickness of 86 microns of size 500x75x75 mm. Test certificates towards galvanization shall be submitted along with supply.The cable trays shall be supplied along with coupler plates and its accessories like SS304 nuts,bolts, washers etc. |
| 5 | Unit rate towards Supply & Installation of FRP pultruded ladder type horizontal cable tray bend of 300 mm x 75x75 mm with 3 mm thickness as per IS 6746 : 1994 with its latest amendments. The rungs shall be of hollow type with 19mm internal dia along with thermoplastic pin and epoxy adhesives on both sides of the tray. The bend shall be of 300 mm width. |
| 6 | Unit rate towards Supply of FRP pultruded ladder type horizontal cable tray bend of 500 mm x 75x75 mm with 3 mm thickness as per IS 6746 : 1994 with its latest amendments. The rungs shall be of hollow type with 19mm internal dia along with thermoplastic pin and epoxy adhesives on both sides of the tray. The bend shall be of 500 mm width. |
| 7 | Unit rate towards Supply of ISA 50 x 6 mm |
| 8 | Unit rate towards Supply of ISMC 100 |
| 9 | Unit rate towards Supply of GI flat of size 50x5mm with galvanization thickness of 86 microns |
| 10 | Unit rate towards Supply of 50mm dia GI pipe with galvanization of 86 microns. |
| 11 | Unit rate towards Fabrication of structural steel along with painting the structures with 01 coat of primer and 02 coats of coaltar based epoxy finish coating before installation at site. |
| 12 | Dismantling of old cable trays, bends etc and Installation of new Cable trays, bends etc as per the scope of work attached herewith. |
AI Tender Summary
Tender Timeline
Feb 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender