|
| 1 | Part A - Equipment and Machineries (For part A, rate should be quote inclusive of GST) |
| 2 | C & D Waste Crushing Unit Jaw Crusher Size : 24 inch x18 inch Manufactured with heavy duty mainframe, fitted with hardened EN-19 Steel Shaft, spherical roller bearing, cast steel jaw stock, housing and aligned with equally balanced fly wheels (Including GST/Transport) |
| 3 | C & D Waste Processing Plant (10 – 20 MT per Hour Feed capacity) comprising 1. Hopper & Feeder 2. Feed Conveyor Belt 3. Waste recycling Station( Rinsing Screen) 4. Log Washer 5. Trash Screen 6. Sand Washing Station 7. Wing Conveyors 8. Aqua Cycle /Water Recycling System. 9. Water Tank 10. Complete with Electrical control Panel (Including GST/Transport) |
| 4 | Value Added Products:Automatic manufacturing of paver blocks, Bricks etc Colour Paver, Bricks, Solid & Hollow Blocks Making fully-Auto (Vibro Compacting System with 7.5 HP) Machine , Auto Double Feeder & Hopper Facility/Fully Auto sensor system / PLC computerized panel Board operating all system with HMI Display / Hopper / Railing / Power pack, Etc.Pan Mixer Machine _6_ Feet. (Heavy Duty) (Roller & Blade) / Powerful Worm Reduction Gear Box Trnsmissinon Unit (Capacity 600 Kg) / 7.5HP-1440 RPM with CROMPTON Motor ,Colour Mixer (Drum Type)Conveyor standard company Dunlop or MRF make Rubber Belt (Ft 18) / size 450mm Wide X 3 Ply X 8mm thickness / frame made up with 75 x 40mm channel / 2HP-1440 RPM, CROMPTON Pallet stacker (Gear Type) :Shifting & Arranging Green Bricks Pallet for Lifting Mannual Fork Lift (For shifting Green Bricks Pallet)(Including GST/Transport) |
| 5 | Part B - Infrastructure Development (For part B, rate should be quote exclusive of GST) |
| 6 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed |
| 7 | Excavation for roadway in hard murum and boulders including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed |
| 8 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond thebuilding area stacking asdirected, dewatering and backfilling with available earth/murum watering, ramming etc. complete. (Lift upto1.5m). By Mechanical Means |
| 9 | Carraige of Murum, Building qubish, earth material over distance exceeding 0.50KM including loading and unloading. |
| 10 | Prepare Ashphalt Road WBM Road etc.complete |
| 11 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering ........etc. complete |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. |
| 14 | Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 15 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). |
| 16 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 17 | Portable Security Cabin etc. complete ( As per Technical Specifications in tender and including flooring, insulation, painting,furniture, Tables, Chairs, electrification & Electrical Fittings Tubes, Door lights, Fans, Switches, Sockets, Telephone, AC points (ISI Mark), lights, AC for office etc. complete) |
