|
| 1 | 20.124Supplying erection testing and commissioning of submersible pumping sets as per BIS specification No. 8034-1989 (as amended upto date for pumps) and IS 9283-1979 (as amended uptodate of mtor) the pump motor sets should be capable of pumping clear fresh cold water having characterstics as specified in Clause-4 of IS 8034-1989 and Clause 4.1 of IS 9283-1979.Sr. No. 1 400 LPM, 70 mtr. head 10 HP |
| 2 | 20.11.2Prov. and fixing cast iron double flagned swing check type reflus non return valves PN-1.6 marked with IS : 5312 including nut and bolts marked with IS : 1363 rubber sheet marked with IS : 638 etc. carriage loading unloading etc. complete in all respects to the satisfication of Engineer-in-charge.20.11.2 100mm i/d |
| 3 | 20.10.1Extra for fixing sluice valves/flap valves socketted or flanged including cartage from stores or nearest railway station to site of works :-20.10.1 80mm i/d |
| 4 | 20.10.2 100mm i/d |
| 5 | 20.10.4 200mm i/d |
| 6 | 20.114.1Supplying erection, testing of fully authomatic electric control panel board for T/Wells in pump chamber consisting of MS sheet of thickness 14 gauage duly painted box type floor mounted made of angle frame containing 1 no fully authomatic air brake strte r suitable for motor of the the following capacity min switch of suitable range with HRC fuse, 1 no volt meter (0 to 500 volts) 1 no amp meter of 0 to 100 amp 3 sets of including lamp capacitor of suitable capacity and 1 no single hase preventers with th timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in scedule No. II, including MCB suitable capacitor wooden box etc. as per site wooden box as per site requirement complete in all respect. Make L&T, SIEMENS, BCH,.20.114.1 10 HP motor |
| 7 | 23.24.1Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. |
| 8 | 23.22.8SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings23.22.8.1 63 amp 415 volt |
| 9 | 20.54Prov. GI pipes class B marked with IS : 1239 in 3.05 m length , their threading and welding with flanges (Heavy Duty) on both sides, jointing with nuts and bolts (‘W’ make) rubber glskets, loweing into tube wells and testing including carriage, loading unloading etc. complete in all respects to the satisfication of Engineer-in-charge.20.54.4 100mm i/d |
| 10 | 20.4Jointing cast iron socketed pipes, valves and specials with run lead caulked joints excluding cost of lead and yarn but including cost of labour, fuel and tools etc. Tested complete.20.4.2 100 mm i/d pipe |
| 11 | 20.4.420.4.4150 mm i/d pipe |
| 12 | 20.68.1 Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. with in trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. |
| 13 | N.S.ItemRewinding & repairing of 10 HP submersible motor clear water housing bearing bush, rotter balance and grinding pump repairing complete (impeller new SS, rubber bush, slieve SS with nickering) and all respect as per satisfication of Engineer-in-charge.Tubewell No. 5, 6 & 7 |
| 14 | 24.5.1.4Supply and jonting three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors/fountain lights etc. with voltage grade 1100 volt marked with IS : 694, 1990 inclding cost of jointing materials as well as carriage loading unloading etc. complete in all respects to the satisfication of Engineer-in-charge.24.5.1.4 Submersible copper cable 3 core 6sqmm |
