Tender For Construction Work Of Primary School In Niche Ka Pura Village Of Madhaugarh Development Block Of Jalaun District
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Feb 2023
0 days left
EMD
23000
Bank guarantee accepted
Document Fee
1300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madhogarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Work Of Primary School In Niche Ka Pura Village Of Madhaugarh Development Block Of Jalaun District
BOQ
| Sl. No. | Item Description |
| 1 | Construction work |
| 2 | Boaring holes of 250 mm dia piles of single under reamed of 500 mm dia bulb and 3.5m deep in black cotton soil including all labour and T&P etc. |
| 3 | R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Pileexcluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item. |
| 4 | Local Sand filling in plinth including ramming dressing and extra cortage from 2 km leaddistance complete work at site. |
| 5 | Cementconcrete in 1:5:10 cement sand 22.40-53 mm granite stone ballast crasher broken) in foundation includingsupply of all materials, labours and T&Petc. required for proper completion of the work |
| 6 | R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Plinth beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item. |
| 7 | R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item. |
| 8 | R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Lintel Bend excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item. |
| 9 | R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Slab Beam & Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item. |
| 10 | Mild steel or iron in plain work such as reinforced concrete wrought to required same as necessary including bending for proper completion of the work. |
| 11 | M 150 brick work in 1:6 cement and Coarse fine sand mortor in foundation and plinth i/c all complete as chapter 6 as S.I. No 303 |
| 12 | Providing and laying damp proof course 2.5 cm thick with cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 10 mm ) and curing complete |
| 13 | M 150 brick work in 1:6 cement and Fine sand ofmortor in s/s in one brick thick wall including supply of all materials , labours and T&P etc. required for proper completion of the work.(303+309+310) |
| 14 | Supply of M.S. angle iron door,ventilator Frame made of approved M.S. Iron including drilling holes welding and hinges of required size, nut & bolt etc. as per drawing for proper completion of work at site. |
| 15 | Supply of approved M.S. Z section windows and ventilators excluding cost of glass pans but including supply of all materials its fabrication nut & bolt hold fast required complete of all respect of site. |
| 16 | Providing and fixing 1 mm thick ms sheet garage door with frame of 4x40x6 angle iron , 3.15mm thick ms gusset platees at the junction cornor i/c supply and fixing of necessary fittings. |
| 17 | Supply and Fixing of M.S. Grill of approved Quality and Drawing made of Square M.S. bars including supply of material labour fabrication,T&P and also one coat of red oxide paint complete in all respect as per dirction of Engineer-in-charge. |
| 18 | 12mm thick plaster in 1:6 c:c/s mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in cement & fine sand of 1.25F.M. mortar. in outside |
| 19 | 15mm thick plasterin 1:6 cement mortar over brick work minimum thickness not to be less than 3/6”(12mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar.in perapet wall. Inside |
| 20 | Supply and fixing M.S Shutter Door With Frame 40x40x6 mm angle iron 3.15 mm thick M.S gusset plates at the junctions corners Using M.S. Angle 40x40x6 mm for diagonal braces .Details of cost of a double leaf door |
| 21 | Earth filling in plinth including ramming dressing and extra cortage from 2 km leaddistance complete work at site. |
| 22 | 25 mm thick CementconcreteFlooring in 1:2:4 cement sand 20 mm granite stone ballast crasher broken) in foundation includingsupply of all materials, labours and T&Petc. required for proper completion of the work |
| 23 | 40 mm CementconcreteFlooring in 1:2:4 (1 Cement :2 Coarse send ) 4 graded stone aggregate of size 20 mm nominal size laid in one layer finished with floating cost of neat cement finished |
| 24 | Fixing of glass strip |
| 25 | Painting New iron work with one priming coat and two coat of approved superior quality ready mixed paint including supply of all Matrerial,labour and tools and plants etc. required for proper completion of the work |
| 26 | Providing and applying Putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete . Chapter 16 (new item Ref. Dsr 13.26) |
| 27 | One priming coat & one coat oil distemper on new work for every coat after the first coat including supply of all materials ,labour and T&P etc.(649+650) |
| 28 | Finishing walls with twocement paint of approved quality on new surface with this paint to give an even shade including supply of all material , labour and T&P etc required for proper completion of work |
| 29 | 20mm Extra plaster with neat cement with black oxide paint (size 2.40x1.20 mtr.)with outside border direction of engineering-in-charge. |
| 30 | Electrification work (L.S.) |
AI Tender Summary
Tender Timeline
Feb 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender