Tender For Construction Of Material Recovery Facility Center
Tender Value
39.05 Lakhs
Estimated cost
Bid Submission
25 Feb 2023
0 days left
EMD
1.95 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
azmatgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Material Recovery Facility Center
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in exacavation in trenches for foundationsand for pipescablesetc.in ordinary soil(loam clay or sand) including lift upto 1.5 m anddressingofsidesandrammingofbottogm sand disposal of surplus excavated earth as directedbytheEngineeri/cwithinaleadof 50m. UPPWD SI 251 |
| 2 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost ofform-work,in foundation and floors. UPPWD SI 281 |
| 3 | Sand filling in plinth under floors including watering,ramming,consolidatinganddressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. UPPWD SI 281 |
| 4 | Providingandinjectingchemicalemulsionfor preconstructional antitermite treatment and creating a chemical barrier under and alround the columnpitswalltrenchesbasementexcavation topsurfaceifplinthfillingjunctionofwalland floor, along the the external perimeter of binding expansionjoints,surroundingofpipesand conduits etc, complete (plinth area ofthe building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrateorany otherapprovedmaterialsuch asHeptrachlororChlordanewillbeused.The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation5literspersqm.(2)Backfillin immediate contact with foundation 7.5 liters/sqm (3)Treatmentoftopsurfaceofplinthfilling5 liters/sqm(4)Treatmentjunctionofwallandthefloor7.5 liters/sqm(5)Treatmentofsoilalongexternal perimeterofbuilding7.5liters/sqm.(6) Treatment of soilunder apron alongexternal perimter 5 liters/sqm. (As per manufacturer\"s standard dilution)UPPWD CHAPTER 8 S.N-1 |
| 5 | R.C.C.workwithcementapprovedcoarsesand and20mm.guageapprovedstonegritimthe proportion of 1:1.5:3 in lintels of doors and windowsexcludingsupply ofreinforcementand itsfixingandbindingthesamewith24BWG bindingwireandincludingnecessarycentering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M- 200. UPPWD SN285 |
| 6 | Same as above but for the SLAB i.e. (Using 1:1.5:3 Mix concrete) UPPWD SN 284B |
| 7 | As in item 6 above but in R.C.C. Raft foundationandfooting with approved stoneballast.(Using 1:1.5:3 Mix concrete) UPPWD SN 287+285B-285A |
| 8 | As in item 6 above but in Column with approvedstoneballast.(Using 1:1.5:3 Mix concrete). UPPWD SN 289 |
| 9 | ClassM-150brickworkin1:6cementcoarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials,labour,toolsandplantsetc.required for proper completion of the work. UPPWD SN 303+305b-305a |
| 10 | Class-150 brick work in 1:6 cement and Coarse sand mortar in Super structure including supplyofallmaterials,labourtoolsandplants, etc. required for proper completetion of the work. UPPWD Sn 303+305b-305a+309+310 |
| 11 | Class-150 HALF brick work in 1:4 cement and COARSE sand mortar inSUPERSTRUCTURE including supply of all materials, labour tools and plants,etc.Requiredforpropercompletetionof the work.UPPWD Sn 305b+309+310+310a |
| 12 | P/FMildsteelorironinplainworksuchas reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to requiredshapeasnecessaryincludingbending for proper completion of the work and including supply of steel its wastage bend hooks and authorisedoverlappingshallbemeasuredupto floor two level.UPPWD Sn 504 |
| 13 | 12mmcementplasterinsinglecoatonrough side of single or half brickwall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshedevenandsmooth.(1)1cement:6fine sand.UPPWD SI 586 |
| 14 | 15mmCementplasterinsinglecoatofRough sideofsingleofhalfbrickwallforexterior plastering upto floor two level including internal roundedangleschamfers,and/orroundedangles notexceeding80mm.Ingirthandfinishedeven and smooth No. extra for mixing any additive.1 cement : 6 fine sand (UPPWD SI 586) |
| 15 | Cement concrete flooring 1:2:4 (1 cement :2 coarsesand:4gradedstoneaggregate12-20mm nominal size laid in one layer neat cement (40mm thick floor).(UPPWD SI 605) |
| 16 | Steelworkinbuiltuptubular(round,squareor rectangularhollowtubesetc.)trussesetc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes.(DSR VL 10.16.3-13.33% GST-LC) |
| 17 | ProvidingcorrugatedG.S.sheetroofing includingvertical/curvedsurfacefixedwith polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or withG.I.limpetwashersfilledwithwhitelead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(uptoany pitchinhorizontal/vertical or curved surfaces), excluding the cost of purlins, raftersandtrussesandincludingcuttingtosize and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² (DSR VL 12.1.3-13.31% GST-LC) |
| 18 | Providing ridges or hips of width 60cm Overall with plain G.S sheet fixed with polymer coated all complete. |
| 19 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size , bolt nuts and washers etc. including all complete |
| 20 | Paintingtwocoatoverprimingcoat(but including cost of priming coat) on steel and other metalsurfacesupto10cm.widthorgirthor small articles not exceeding 0.10sqm in area whitesuperiorsyntheticenamelsuchas LUXOL3,Hi-gloss apcolite superlac, DULUX specifiedbrushingtogiveanevenshadeand including cleaning the surface of all dirt,dust and otherforeignmattersandpaperingandstoping includingcostofallmaterials,labourtoolsand plantsetc.requiredfor proper completionofthe work. (UPPWD SI 641+42) |
| 21 | Paintingtwocoatoverprimingcoat(but including cost of priming coat) on steel and other metalsurfacesupto10cm.widthorgirthor small articles not exceeding 0.10sqm in area whitesuperiorsyntheticenamelsuchas LUXOL3,Hi-gloss apcolite superlac, DULUX specifiedbrushingtogiveanevenshadeand including cleaning the surface of all dirt,dust and otherforeignmattersandpaperingandstoping includingcostofallmaterials,labourtoolsand plantsetc.requiredfor proper completionofthe work. (UPPWD SI 641+642) |
| 22 | P/FMildsteelorironinplainworksuchas reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to requiredshapeasnecessaryincludingbending for proper completion of the work and including supply of steel its wastage bend hooks and authorisedoverlappingshallbemeasuredupto floor two level.(UPPWD SI 503) |
| 23 | Providing and fixing G.I. chain link fabric fencingofrequiredwidthinmeshsize50x50 mm including strengthening with 2 mm dia wire ornuts,boltsandwashersasrequiredcomplete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm DSR 16.70.1 |
| 24 | Angle iron door chaukhats 40*40*5 |
| 25 | Z-Section with m.s Grill |
| 26 | Fixing of Door, windows/ventilators chaukhats in position. (a) Door chaukhats |
| 27 | (b) Window chaukats (UPPWD SI 2008) |
| 28 | Providing and fixingglass panes with putti and glazing clips in steel doors windows 4.0 mm thick glass panes |
| 29 | Providing and fixing ISI marked flush door shuttersconformingtoIS:2202(PartI)non- decorative type, core of block board construction withframeof1stclasshardwoodandwell matched commercial 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces of shutters (a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws singleleaf |
| 30 | Providing & fixing aluminium sliding door bolts ISI marked with nuts and screws etccomplete. (a) 250mm x 16mm . |
| 31 | Providing and fixing aluminium door bolts ISI with necessary screws etc. complete |
| 32 | Providing and fixing aluminium Handel ISI with necessary screws etc. complete |
| 33 | Finishingwallswithwater-proofingoncement paint of approved make such as super snowcem, durrocem,robiacem,guttucemsupercemquality and of required shade on undecorated wall surfaces(twocoat)overoneandincludingone coatwhiteafterthoroughly brushingthesurface topowderedmaterialsincludingcuringandcost of all materials.(UPPWD SI 660+661) |
| 34 | Providingandfixingonwallfaceunplasticised RigidPVCrainwaterpipesconformingtoIS: 13592TypeA,includingjointingwithsealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 35 | Wiring points for light with 1 sqmm.FRLSH PVCinsulatedsinglecorecoppercondutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcementbeforeconcreting,complete with 1.5 sqmm.FRLSH PVC insulatedmultistrand copper conductor cable as |
| 36 | Same as item No.(1) but for fan and light duty exhaust fan. |
| 37 | Same as item No.(1) but for 5amp plug point withpiano type swichand socket etc. |
| 38 | Supply&fixingofindustrialbulkhead fitting with polycarbonate base guard, prismaticreflectorsilicongasketsuitablefor and with 1 x 18 Watt CFL complete in all respect |
| 39 | Supply and fixing of recess mounting LED light 1x22 watt led tube light including all complete. |
| 40 | Supplyandburyingof40mmdiax4.5meterslongG.I. pipe,verticallyforearthinghaving12mmdia.Holes spaced 75mm apart drilled upto 2 meters from the bottom complete with earthing lead of no 6 to 8 SWG GI wire in GI pipe upto appron (and from appron to switch board thecost of G.I. pipe and G.I. wire will be extra) upto switchboard, 30cm. square C.I. box |
| 41 | Supply & fixing of one number 8 SWG G.I. wire in 15mm dia.G.I.pipeforearthing,laidinwalldulyconcealed includingthecostofcement,sand,labour,T&Pothermaterial required for proper completion of the wirk as directed at site. |
| 42 | Supply and fixing of 240 volts \"L\" series miniature circuitbreaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. |
| 43 | Supply and fixing of flush/surface mounting distribution boards complete in all respects. |
| 44 | Erection and testing of celling fan and regulator for room height upto 3.5 mts. Including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in allrespects. |
| 45 | providing and laying unplastisized rigid PVC pipe conforming to IS:13592 type a including jointing , cutting and making good the wall &floors as per requirment 150mm |
| 46 | supply and erection of AC 1200mm Sweep, 220/240 Volts, 50 Hz celling fan with reguleter stander down rod, blades including connection etc. |
| 47 | ADD EXTRA FOR SIX WATER TAB IN WASHING UNIT |
| 48 | Excavation for all types and sizesoffoundations,trenches and drains of for any other purposeincludingdisposal of excavatedstuffupto1.5mlift andleadupto50m(Atleast 5mawayfromtheexcavated area), including dressing and leaving of pits. |
| 49 | Providingandlayingnominal mixcementconcretewith crushedstoneaggregateusing concretemixerinfoundation, plinthandatgroundlevel excluding cost of form work.UPPWD SI 281 |
| 50 | Brickwork1:6 cement coarse sand UPPWD SN 303+305b-305a |
| 51 | Providingandfixingin position chain linked steel wire fabricmadeof4mmdiaG.I wire of required width in mesh toconcrete/wooden/angleiron posts including securing and screwing with 2mm dia G.I wire, G.I staples, G.I.U-nails or steel Pins etc. Complete |
| 52 | Providing and placing in position angle iron post and strutofrequiredsizeincluding bottomtobesplitandbentat right angle in opposite direction for required length anddrillingholesupto10mm dia.asperrequirement including priming coat with red oxide zinc chromate primer and placing the post/strut in cement concrete block. |
| 53 | Providingandlayingnominal mix plain cement concrete with crushedstoneaggregateusing concrete mixer in all works UPPWD SI 283 |
| 54 | 12mm thick cement plaster of mix: |
| 55 | 12mm thick cement plaster of mix: |
| 56 | Finishingwallswithwater proofing cement paint of required shade to give an even shade. |
| 57 | Earth work in exacavation in trenches for foundationsand for pipescablesetc.in ordinary soil(loam clay or sand) including lift upto 1.5 m anddressingofsidesandrammingofbottom sand disposal of surplus excavated earth as directedbytheEngineeri/cwithinaleadof 50m.UPPWD SI 105 |
| 58 | ClassM-150brickworkin1:6cementcoarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials,labour,toolsandplantsetc.required for proper completion of the work. |
| 59 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate40 mmnominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 60 | Sand filling in plinth level as per requirement including supply of necessary quantity of sand from as distance not exceeding 8.00 km from site of work and including watering & dressing etc. |
| 61 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M30 grade made by block making mahine with strong vibratory compaction, approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of sand and filling with the oints fine sand etc. including all complete. as per DSR 16.91.2 |
| 62 | 100mm PVC casing pipe of ISI mark. 14 kg pressure |
| 63 | P/ F 2\" GI pipe (B) class. |
| 64 | Nylon mesh for filter. |
| 65 | Plastic dori. |
| 66 | Solvent cement. |
| 67 | 4\" End cap. |
| 68 | 4\" Submersible cap. |
| 69 | 2\" MS clamp (Heavy). |
| 70 | 2\" GI elbow. |
| 71 | 2\": X 6\" GI nipple. |
| 72 | 1.5 HP 9 Stage submersible pump of ISI mark withautomatic panel. |
| 73 | 2.5 sqm. Submersible cable. |
| 74 | Drilling charges for 6\" dia tubewell. |
| 75 | Pea Gravel. |
| 76 | 2\" MS socket. |
| 77 | Cartage of material upto site. |
| 78 | Earth work excavation in ordinary soil (Loam clay or sand) including lift upto 1.5m and lead upto 30.00m & including filling watering and ramming of excavated earth into trenches and disposal of surplus earth upto a distance of 30.00m. PWD 251 |
| 79 | Providing and laying 1:4:8 cementconcrete with cement , fine sand and 40 mm stone aggregate in the base S.I 281 |
| 80 | Providing and injecting chemical emlusion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pitesswall trenches basement excaqvation top the external perimer of binding expansion joints, surrounding of pipes and conduit etc. Treatment of soil under Apron Along extrnalPerimeter 5 litres per sq.UPPWD CHAPTER 8 S.N-1 |
| 81 | R.C.C. work 1:1.5:3 with cement, coarse sand and 20mm stone grit excluding supply of reinforcement and its fixing and binding and including necessary centring and shuttering etc.UPPWD SI 283 |
| 82 | As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)UPPWD SI 284B |
| 83 | ClassM-150brickworkin1:6cementcoarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials,labour,toolsandplantsetc.required for proper completion of the work. |
| 84 | 12.5mm thick DPC 1:2:4 with cement, coarse sand and 10mm stone grite including water proofing material including all complete. PWD 361 |
| 85 | Providing&applyingacoatofresidual petroleumbitumenofgradeofVG-10of approvedqualityusing1.7kgpersquare metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 86 | Same as in item No. 11 above but in super- structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as requiredandalsoincludinghoneycombed brickworkinthicknessofwallmorethan 12cms. (1:6 cement : coarse sand) |
| 87 | Same as in item no. 9 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 88 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought torequiredshapeasnecessaryincluding bendingforpropercompletionofthework and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor twolevel. |
| 89 | 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of2.25 F.M. |
| 90 | 12 mm cement plaster in single coat on rough sideofsingleorhalfbrickwallforinterior plasteringuptofloortwolevelincluding internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 finesand |
| 91 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plasteringuptofloortwolevelincluding internalroundedangleschamfers,and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixinganyadditive.(1)1cement:6fine sand. |
| 92 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified bythemanufacturer)of1stquality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar1:4(1Cement:4Coarsesand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cementandmatchingpigmentetc., complete.. |
| 93 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness tobespecifiedbythemanufacturer),of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bedofcementmortar1:3(1cement:3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in whitecementmixedwithpigmentof matching shade complete. |
| 94 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12- 20mmnominalsizelaidinonelayerneat cement (25 mm thick floor). |
| 95 | Providing and fixing of Flush doors commercial quality conforming to I.S. 2202 part-I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment ofhinges, bolts locks, handles springfittingwith necessary screws to besupplied departmentally. 30 mm thick |
| 96 | Providing & fixing of hold fast for chaukhats of doors and windows. |
| 97 | Providing & fixing of door / windows grill. |
| 98 | Z-Section steel windows (openable) |
| 99 | Angle iron door chaukhats 40*40*5 |
| 100 | Door chaukhats |
| 101 | Ventilator chaukhats |
| 102 | White washing (Two coat)including including supply ofall materials. (For Internal wall surface) |
| 103 | Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.67 Ltr./10 Sqm over andincludingbasecoatofwaterproofing cement paint applied @ 2.20 kg/10 Sqm. |
| 104 | White washing (Two coat)including including supply ofall materials. (For Internal wall surface) |
| 105 | Providing and fixing stainless steel towerbolts (barreltype)withnecessaryscrewsetc. complete |
| 106 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm |
| 107 | Providing and laying integral cement based waterproofingtreatmentincluding preparation of surface as required for treatmentofroofs,balconies,terracesetc consisting of following operations: |
| 108 | Paintingtwocoatoverprimingcoat(but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour toolsandplantsetc.requiredforproper completion of the work. |
| 109 | Same as item 27 above but on new wood surface. |
| 110 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes |
| 111 | Providing and fixing white vitreous china flatbackhalfstallurinalof size 580*380*350mm with white PVC automaticflushingcistern,withfittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556,C.I.trapwithoutlet gratingand othercouplingsinC.P.brassincluding painting of fittings and cutting and makinggoodthewallsandfloors wherever required: |
| 112 | Providing and fixing white vitreous china flatbackhalfstallurinalof size 580*380*350mm with white PVC automaticflushingcistern,withfittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556,C.I.trapwithoutlet gratingand othercouplingsinC.P.brassincluding painting of fittings and cutting and makinggoodthewallsandfloors wherever required: |
| 113 | Providing and fixing white vitreous china flatbackhalfstallurinalofsize 580*380*350mm with white PVC automaticflushingcistern,withfittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556,C.I.trapwithoutletgratingand othercouplingsinC.P.brassincluding painting of fittings and cutting and makinggoodthewallsandfloors wherever required: |
| 114 | Providing and fixing unplasticised PVC connection pipe with brass unions |
| 115 | ProvidingandfixingC.P.brassbibcock ofapprovedqualityconformingto IS:8931 15mm nominal |
| 116 | 110mm dia |
| 117 | 90mm dia |
| 118 | Providingandfixingonwallface unplasticised-RigidPVCrainwaterpipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 119 | 110mm Band |
| 120 | 110mm Shoe |
| 121 | Providing and fixing to the inlet mouth of rainwaterpipecastirongrating15cm diameter and weighing not less than 440 grams. |
| 122 | Providing and fixing unplasticised-PVC pipeclipsofapproveddesignto unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of requiredlengthincludingcuttingbrick work and fixing in cement mortar 1:4 (1 cement:4coarsesand)andmaking good the wall etc. complete. |
| 123 | Makingkhurras45x45cmwithaverage minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4gradedstoneaggregateof20mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster1:3(1cement:3coarsesand) and a coat of neat cement,punning,roundingtheedgesand making and finishing the outlet complete. |
| 124 | 20mm dia nominal outer dia pipes |
| 125 | 25mm dia nominal outer dia pipes |
| 126 | ProvidingandfixingGIpipes completewithGIfittingsandclamps, includingcuttingandmakinggood walls etc. (internal work). |
| 127 | Painting GI pipes and fittings with SYNTHETICenamelpaintoveraready mixedprimingcoat,bothofapproved quality for new work. |
| 128 | Providing and fixing GI Union in GI pipes includingcuttingandthreadingthepipe andmakinglongscrewsetc.complete (new work). |
| 129 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 130 | Providingandplacingonterrace(atall floorlevels)polyethylenewaterstorage tankISI:12701markedindicatingthe BISLicenseNo.withcoverandsuitable locking arrangement and making necessary holes for inlet, outlet and over flowpipesbutwithoutfittingandbase support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. |
| 131 | Excavating trenches of required width for pipes, cables etc. including excavation for socketsanddressingofsides,ramming ofbottoms,depthupto1.5mincluding getting out the excavated soil, and then returningthesoilasrequired,inlayers notexceeding20cmindepthincluding consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. |
| 132 | Providing, laying and jointing glazed stoneware pipes grade \"A\" with stiff mixtureofcementmortarinthe proportionof1:1(1cement:1fine sand) including testing of joints etc. complete. |
| 133 | Providing and laying cement concrete 1:5:10(1cement:5coarsesand:10 gradedstoneaggregate40mmnominal size)allroundS.W.pipesincludingbed concrete as per standard design |
| 134 | Providingandfixingsquare-mouthS.W. gullytrapgrade‘A’completewithC.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300mmsize(inside)theweightof covertobenotlessthan4.50kgand frame to be not less than 2.70 kg as per standard design |
| 135 | Providingandfixingonwallface unplasticisedRigidPVCsoilandwaste waterpipesconformingtoIS:13592 TypeBincludingjointingwithsealring conforming to IS : 5382 leaving 10 mm gapforthermalexpansion.(i)Single socketed pipes. 110mm dia PVC pipe |
| 136 | 90mm dia PVC pipe |
| 137 | Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) |
| 138 | Providingandfixingonwallface unplasticised- PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving10mmgapforthermal expansion. 110mm bend |
| 139 | 90mm bend |
| 140 | coupler 110mm |
| 141 | coupler 90mm |
| 142 | Providing and fixing pvc Inlet fitting with 2 inlets 80 mm size fabricated from 110 mmdiaPVCpipes(approx. length=150mmto300mm)andfixedto PVCtrapwithjointandsetincement concreteasperstandarddrawing complete. |
| 143 | Making soak pit 2-5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete asper standarddesign. |
| 144 | Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included inoverall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. (PWD- 503) |
| 145 | Painting one coat over priming coat (but including cost of priming coar) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 sqm in area with superior synthetic enamel such as LUXOL 3.Hi-gloss apcolite superlac. DULUX specified brushing to give an shade and including cleaning the surface of all dirt dust and other foreing matter sand papering and stoping including cost of allmaterials labour tools and plants etc. required for proper completion of the work. PWD-641+642 |
| 146 | Preparationandconsolidationofsubgradewithpower road roller of 8 to 12 tonne capacity after excavating earth toanaverageof22.5cmdepth,dressingtocamberand consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 147 | Constructionofgranularsub-basebyprovidingclose graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by ipperstoworksite, forallleads&lifts,spreading in uniform layers of specified thickness with motor grader on preparedsurfaceandcompactingwithvibratorypower rollertoachievethedesireddensity,completeasper pecificationsanddirectionsofEngineerin-ChargeWith material conforming to Grade-II (size range 53 mm to0.075 mm ) having CBR Value-25 |
| 148 | Providing and laying C.C.pavementofmixM-25with readymixedconcretefrombatchingplant.Theready mixedconcreteshallbelaidandfinishedwithscreed boardvibrator,vacuumdewateringprocessandfinally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer- incharge.(Thepanelshutteringworkshallbepaidfor separately).(Note:-Cementcontentconsideredinthis itemis@330kg/cum.Excess/lesscementusedasper design mix is payable/ recoverable separately). |
| 149 | Wiring points for light with 1 sqmm.FRLSH PVCinsulatedsinglecorecoppercondutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcementbeforeconcreting,complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as |
| 150 | Supply & fixing of fancy type round ceilingfittingmadeofpolycarbonatesuitablefor and with 1x15/18 watt CFL complete in all respect. |
| 151 | Supply&fixingofindustrialbulkhead fitting with polycarbonate base guard, prismaticreflectorsilicongasketsuitablefor and with 1 x 18 Watt CFL complete in all respect |
AI Tender Summary
Tender Timeline
Feb 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender