Tender For Improvement To Katgun Khatav Road Vr 67 Tal Khatav
Tender Value
23.94 Lakhs
Estimated cost
Bid Submission
25 Feb 2023
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khatav → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Katgun Khatav Road Vr 67 Tal Khatav
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing Name board of size 0.90 X 1.20 mtr.with two vertical Angle of 40 X 40 X 5 mm of 2.25 mtr.height out of which 0.45 mtr.embedded in cement concrete 1:4:8 of trap metal and M.S.Angle 40 X 40 X 5 mm top and bottom and 16 gauge thick sheet including anticorrosive and oil paint coating and lettering of text height 3 inches as Yellow background and letters in black colours etc. complete |
| 2 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening / binding material to fill the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density. - By Mechanical Means - Grading II Using Screening type-B (11.2 milimetre Aggregate)Item / Page No : 20 / 29Specification No : MORTH-401,402,404,902,112Spec. Page No : 109-111,112-116,121-129,417-421,19-21 |
| 3 | Providing and constructing 50 milimetre thick modified penetration macadam road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone metal layers 30 percent crusher broken metal plus 70 percent hand broken (by breaking rubble obtained by blasting), heating and spraying the bitumen of Specified grade at the rate of 1.75 kilogram per square metre, spreading 12 milimetre size chips, compacting with static roller having weight 8 to 10 metric tonnes to achive the desired degree of compaction as per technical specification Clause 506, excetra complete, including applying tack coat of bitumen of specified grade at the rate of 0.30 kilogram per square metre on existing bitumen surface. (Using VG-30 bulk bitumen)Item / Page No : 38a / 32Specification No : IRC-SP-20Spec. Page No : 215 |
| 4 | Providing and applying tack coat on the prepared surface, heating by flames in boiler and spraying bitumen set footed in bitumen boller on black topped surface 2.5 killogram per 10 square metre. (Using VG-30 bulk bitumen)Item / Page No : 30 / 30Specification No : MORTH-503Spec. Page No : 168-170 |
| 5 | Proving and laying bituminous macadam using crushed aggregates of grading-I premixed with bituminous binder, transported at site with vehicle tracking system, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired density for 80 / 100 milimetre compacted thickness - Using drum mix type hot mix plant without Supervisory Control and Data Acquisition having complying essential features of Hot mix plant as per Indian Road Congress-27-2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate feeder, built in dust controller system and Programmable Logic Controller for Drum Mix plant, Sensor paver and Vibratory roller, excluding prime/Tack coat, excetra complete - Bitumen specified grade 3.30 percent. (Using VG-30 bulk bitumen)Item / Page No : 42 / 33Specification No : MORTH-501,504,902,903,112,IRC-SP-97/2013Spec. Page No : 149-162,170-174,417-421,421-436,19-21 |
| 6 | Providing and Laying open graded premix surfacing of 20 milimetre thickness composed of 13.2 milimetre to 5.6 milimetre aggregates premixed with bituminous binder, transported to site with vehicle tracking system, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction, excluding prime / tack coat and seal coat. For Bitumen VG-30 bulk (Grade 60/70) - Using drum mix type hot mix plant without Supervisory Control and Data Acquisition, Paver and vibratory roller. (Over modified penetration macadam surface)Item / Page No : 12 / 36Specification No : MORTH-501,510,511,902,903,112,MORTH-503Spec. Page No : 149-162,198-205,205-207,417-421,421-436,19-21,168-170 |
| 7 | Providing bituminous type-A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade, preparing existing road surface, heating and applying bitumen at the rate of 0.98 kilogram per square metre by mechanical means, spreading chips and rolling by static roller having weight 8 to 10 metric tonne, excetra complete.Item / Page No : 1 / 35Specification No : MORTH-511Spec. Page No : 149-162,205-207,198-205,417-421,19-21 |
| 8 | Supplying hard murum / kankar at the road site, including conveying and stacking, excetra complete.Item / Page No : 29a / 25Specification No : MORTH-408Spec. Page No : 139-142 |
| 9 | Spreading hard murum / soft murrum / gravel or kankar for side width, excetra complete.Item / Page No : 30 / 25Specification No : MORTH-408Spec. Page No : 139-142 |
| 10 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering, excetra complete.Item / Page No : 31 / 25Specification No : MORTH-408Spec. Page No : 139-142 |
| 11 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.)Item / Page No : 3 / 0 |
| 12 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.Item / Page No : 4 / 0 |
AI Tender Summary
Tender Timeline
Feb 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender