|
| 1 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities notexceeding 15 cm depth and disposal of the rubbishwithin a lead upto 75 m as directed. |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 3 | A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand) |
| 5 | Brick work with 1st class bricks in cement mortar (1:6)Foundation and Plinth |
| 6 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 7 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) |
| 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (32 mm down) excluding shuttering . |
| 9 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes(i) Pakur Variety |
| 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation. |
| 11 | Tor Steel Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, ooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. |
| 12 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. ii) 25 mm. thick |
| 13 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one orrugation minimum side lap.(Payment to be made on area of finished work)(GCI sheet tobe supplied by contractor) |
| 14 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) (A) 300 mm lapping each way |
| 15 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all n icidental chages (such as electricity, labour insurance) etc. complete. ) For roof truss works a) Span up to 12 Mtr |
| 16 | Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (i) 16 mm dia bolt (b) 450 mm long |
| 17 | ii) 20 mm dia bolt. (c) 600 mm long |
| 18 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor ii) Grill weighing above 16 Kg./sq.mtr and above |
| 19 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). c) Sal : Siliguri. |
| 20 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. |
| 21 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paidSeparately) a) 40mm X 6mm, 250mm Length |
| 22 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.iii) 75mm. X 40mm. X 1.12mm. |
| 23 | (A) Iron door ring of approved quality fitted and fixed with nut and washer complete. i) 50mm dia. |
| 24 | A) Iron door ring of approved quality fitted and fixed with nut and washer complete. ii) 75mm dia. |
| 25 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:v) 150mm long x 12mm dia. bolt. |
| 26 | Anodised aluminium barrel / tower / socket bolt (fullcovered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. Bolt |
| 27 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufacture from extruded section conforming to I.S. specification (I.S. 2681/66) fitted andfixed complete.(iv) 300mm x 19mm dia. bolt. |
| 28 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (c)(i) With 1:6 cement mortar15 mm thick plaster |
| 29 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 30 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats |
| 31 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc 1 a)steel surface |
| 32 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc1 b)wood surface |
| 33 | (b) Two coat on Paintingwith any shed except white and blsck best quality synthetic enamel superior quality paint of approvaled makes and brand including using of approved putty etc A) On Wood surface |
| 34 | (b) Two coat on Paintingwith any shed except white and blsck best quality synthetic enamel superior quality paint of approvaled makes and brand including using of approved putty etc A) On Wood surface |
| 35 | Add GST @ 12% |
| 36 | Add Cess @ 1% |
