Tender For Construction Of Office Building In Tncsc Godown Campus At Uthangarai Taluk In Krishnagiri District
Tender Value
20 Lakhs
Estimated cost
Bid Submission
14 Feb 2023
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
uthangarai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building In Tncsc Godown Campus At Uthangarai Taluk In Krishnagiri District
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 3 | Open Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compoundin places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing,eveling the site, shoring, strutting, bailing of water wherever necessaryetc., complete complying with standard specificationand as directed |
| 4 | Refilling with excavatedearthin foundation and basement as directed by the departmental officers. |
| 5 | Cement Concrete 1:5:10 (One Cement, Five sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc., complete complying with standard Specification and as directed by the departmental officers. |
| 6 | BRICK WORKin cement mortor 1:5(one cement, five sand) using best quality Countrybricks ofsize 8\" 3/4\"x4¼ x 2 ¼” \" for walls including cost of scaffolding curing, finishing etc., complete complying with standard specifications and as directed by the departmental officers.In foundation and basement |
| 7 | In ground floor upto 4.50M height. |
| 8 | Supplying & Erecting of steel centering for sides & soffiots including necessary supports & strutting upto3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60 cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 × 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., )Column footing, Plinth beam, etc. |
| 9 | For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 10 | Coloumn sqaure, Rectangular or round. |
| 11 | Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed. |
| 12 | PLASTERING the walls with C.M.1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard Specification and as directed by the departmental officers. |
| 13 | PLASTERING the walls with C.M.1:3 (one cement and three sand) 10mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard Specification and as directed by the departmental officers. |
| 14 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc.,complete complying with standard specification and as directed. |
| 15 | Supply and filling of M.Sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of sand to Site and all labour charges and, all other incidential charges etc., complete complying with standard Specification and as directed by the departmental officers. |
| 16 | Cement Concrete 1:2:4 ( one cement, two sand, four aggregate)using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishingand curing etc., complete complying with standard specifications and as directed.In foundation andbasement |
| 17 | For Super Structure in Ground Floor. |
| 18 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers. |
| 19 | White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed. |
| 20 | Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers. |
| 21 | Painting new iron works with two coats of synthetic enamel paint of approved quality and colour over the red oxide primer in all floor including cost ofscaffolding, brushes etc., complete complying with standard specification and as directed. |
| 22 | Supplying and fixing fine polished cuddapah slab of 25mmthickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers. |
| 23 | Finishing the flooring with designed Ceramic tiles of size 305x305x8mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works). |
| 24 | Dadooing with plain colour glazed tiles of size 300mm x 200mm x 6mm of best approved quality, white / colour glazed tilesset in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., completecomplying with standard specification and as directed by the deptmental officers. |
| 25 | Supplying fabricating and fixing in position of Aluminium Anodisednatural colour matt finish sliding window in two track in all floors with following sizes . All the three shutters with sliding arrangementsthe bottom section should have gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such as rubber beeding. Necessary dismantling making necessary holes in RCC columns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers . The Aluminium surfaces should be anodised with matt finish under electrically conditionin accordance withISspecification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) for all sections . All the materials should be got approved by the Engineer incharge before fixing as directed. |
| 26 | Supplying, fabricating and fixing in position aluminum anodized natural colour matt finish louvered ventilator of size 600 mm x 600 mm with outer frame section with 62 x 38 x 2 mm at 1.174 Kg / m and the louvered with moving arrangements made with alluminium channel of size 60 x 30 x 4 mm at 1.274 Kg / m alluminium clips 19.05 x 17.27 / 11.05 x 0.075 mm at 0.169 Kg / m with necessary 4 mm thick plain glass panel for louvers including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC masonry and made good to the original condition after fixing etc complete. The alluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI Specification 1868 / 1962 for anodic film thickness of not less than 15 micron etc. |
| 27 | Supplying and fixing in position of Aluminium door ofSingle shutter top 1/3rd glazed and bottom 2/3rd panelled door with/without frame made out of box section 101.60 x 44.45 x 2.50mm at 2.07 Kg /m door shutter frame made out of 50 × 44.45 × 2.50 mm at1.292 Kg /m for vertical styles, top and middle and bottom section 101.60 × 44.45 x 2.50 mm at 1.974 Kg /m and using Aluminium clips of size 17.15 x 17.27 x 1.50 mm at 0.178 Kg /m, full handle section of size 100 × 30 x 1.60mm at 0.988 Kg/m on both sides, with necessay metal screws, pivots, rubber beading, PVC felts, tower bolts, automatic door closure, lock, 5.50mm thick plain glass and both sides prelaminatedMD board 12mm thick for panel portion including cost of all materials, labour, power consumption, drilling holes in RCC column, floor slabs, masonry walls where ever necessary and make to the original condition etc,. All the aluminium sections are to be anodized with matt finish under electrically controlled condition in accordance with IS 1868/1962 of anodicThickness of not less than 15 microns. |
| 28 | Supplying and fabricating and fixing in position of mild steel door with double shutters using M.S.angle of size 40x40x6mm for outer frames and 35x35x5mm for shutter frames, with bottom 1/3rd M.S Sheets of 18 gaugewith M.S flate of size 32.x6for internal stiffners and top 2/3rd grilled including one number of aldrop, two numbers of tower bolts,hold fast , hinges, handle etc., including two coatssynthetic enamel paint over one coat of primer.The rate shall inclusive of cost of all materials. |
| 29 | Supplying and fixing M.S Grill tospecial windows and ventilators etc using 20mmx6mm angle including cost of MS grill, one of red oxide and fixing in position etc. complete complying with Standard Specification and as directed. |
| 30 | Paving the flooringwith vertifiedTiles of size 600 x 600 x 8mm of approvedcolour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed with same colour pigments etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 31 | Supplying and fixing of 110mm dia PVC rain water down fall pipes of including cost of PVC specials fixing them in position with nessary shoes, bends, clamps, TWplugs, screws, nails etc., complete. As per standard specifications. |
| 32 | Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). |
| 33 | Supply and fixing in position wash hand basin with new one fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G.M wheel valve 15mm dia brass nipple 15mm dia nylon connection etc., including fixing the wash hand basin in the wall in position with pair of CI brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a primary coat of anticorrosive paint including testing for leakage etc., complete complying with standard specification. |
| 34 | Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification. |
| 35 | Supplying and fixing in position of best Indian make PVCWater Tank of 1000 litres capacity confirming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications. |
| 36 | Supplying, and fixing 25mm diaPVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive ofcost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixingthe PVCpipe as directed by the departmental officersetc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 37 | Supplying, and fixing 20mm diaPVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive ofcost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixingthe PVCpipe as directed by the departmental officersetc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 38 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of 32mm dia with ISI makeincluding cost of shellac, thread balls, etc., complete. |
| 39 | Supplying and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers. |
| 40 | Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete as directed by the departmental officers. |
AI Tender Summary
Tender Timeline
Feb 09, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 15, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender