Public Works Department-PWD has published Tender For Upgradation / Augmentation Of Tehsil Office Doda By Way Of Providing And Fixing Of Ward Robe/ Almirah With Ply Board, Aluminum Partition And Other Allied Works. Submission Date for this Tender is 16-02-2023. Aluminum Supply Tenders in doda Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : Flat pressed 3 layer particle board or graded wood particle board IS:3087 (18 mm) |
2 | Providing and fixing sun mica for partition board and shutters with necessary arrangements all complete. |
3 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm |
4 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type) |
5 | Providing and fixing of Dado Kabza hinges for cup board shutters. |
6 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) |
7 | For fixed portion,Powder coated aluminum (minimum thickness of powder coated 50 microns) |
8 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
9 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
10 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
11 | Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge Polyester powder coated minimum thickness 50 microns aluminum |
12 | Providing and fixing special quality chromium plated brass cupboard locks of approved quality with six levers including necessary screws etc. complete : 50 mm |
13 | ELECTRIFICATION: -Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit as required. |
14 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
15 | 20 mm |
16 | 25 mm |
17 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. |
18 | 1x1.5s q. mm |
19 | 2x1.5 sq. mm |
20 | 2 x 2.5 sq. mm |
21 | 3 x 2.5 sq. mm |
22 | 2 x 4 sq. mm |
23 | 3x 4 sq. mm |
24 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
25 | 5/6 amp switch |
26 | 3 pin 5/6 amp socket outlet |
27 | 15/16 amp switch |
28 | 6 pin 15/16 amp socket outlet |
29 | Bell Push |
30 | Supplying and fixing following size/ modules, GI box alongwith modular base &cover plate for modular switches in recess etc. as required. |
31 | 1 or 2 Module (75mmX75mm) |
32 | 3 Module (100mmX75mm) |
33 | 4 Module (125mmX75mm) |
34 | 6 Module (200mmX75mm) |
35 | 8 Module (125mmX125mm) |
36 | 12 Module (200mm x 150mm) |
37 | Supplyingand fixing call bell/ buzzer suitable for single phase, 230 V, complete| as required |
38 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 KA"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole |
39 | Supplying& fixing of following electrical items. |
40 | Angle / Button Holder |
41 | Fan sheet |
42 | LED Panel 12 watt |
43 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular| plate etc. as required. |
44 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
45 | Supplying and fixing of 20 watt LED batten type 4 feet long with complete connections as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail