Provision Of Power Supply To Hrdf Hut At Af Station Bhisiana
Tender Value
24.61 Lakhs
Estimated cost
Bid Submission
08 Mar 2023
0 days left
EMD
49220
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhisiana → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
PROVISION OF POWER SUPPLY TO HRDF HUT AT AF STATION BHISIANA
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Mar-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Mar-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, install , testing and commissioning of Eco feriendly 25 KVA disel engine driven generating set with acoustic enclosure made out of CRCA sheet powder coated . Specially designed lifting arrangement/hooks, meet the latest CPCB, norms of 75 dBA @ 1 mtr distance and as per the testing guide line of CPCB. DG set shall be confirming to IS 10001/10002 and alternator as per : IS 13364 water cooled type self starting system with 24V DC supply , 3 phase 4 wire AC 415 Volt +5% at 1500 RPM, 50 HZ, 0.8 PF self exciled, self regulated, automatic voltage regulation, class H insulation type alternator. With AMFpanel for automatic automatic starting at mains failure installed with the following accessories. Eco friendly for emmission and noise diesel engine confirming to BS/IS standard water cooled complete under NTP condition with a provision for 10% over load for one hour on 12 hours running with he following :Engine : * 3 Cyllinder ,In-line 4 Stroke,radiator cooled engine* Well designed air handling system with dry type,replaceable paper element air cleaner with restriction indicator,Air to Air after cooling for 25 KVA ,Optimised turbocharger for increased attitude capabilites.* Best in class fuel economy with Inline fuel pump with A1 class mechanical governing ,spin on fuel filter* Standard intergral set mounted radiator system,designed and testedfor 50 Deg cel ambient temprature* Full flow spin on lube oil filter,first fill of lube oil and coolant,Electrical starter motor with soft start engagement feature,Battery charging altenator 1X12 V DC battery required AHAlternator :* Brushless type,screen procted,Revolving field ,self excited alternator conforming to IS/IEC 60034-1* Dedicated winding specially designed for 3Phase operation,better motor starting capability,best in class efficiency,compact design with sealed bearing for longer life and lesser maintenance.* Impregnation on all wound component for better mechanical strength. |
| 2 | Control Panel:Control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish Aluminum bus bars with suitable capacity with incoming/outgoing terminals Indicating lamps for \" Load ON\" and \"Set Running \",Instrument fuses duly wired and ferruled MCCB of suitable rating with overload and short circuit protections.Monitoring and fault detection:Microprocessor based generator set monitoring and control system. This control includes an intuitive opreator interface that allows for complete generator set control as well as system metering , fault annunciation, configuration and diagnstics.Intuitive operator interface which includes LED backlit LCD display with tactile feelsoft- switches & generator set status LED lamps ,Remote Start- Stop, Engine Metering : Oil pressure , Engine temperature , Starting battery voltsge, Engine running hours AC AlternatorMetering :L-LVoltage and L-n Voltage.Miscellaneous :- Automatic main failure by pass arrangement with On Load Changeover Switch 63/100 Amps 4 Pole factory made control panel as per manufacture,s spectification suitable for DG set cap 25 KVA grouted in floor, PCCFoundation including following accessories(i) MCCB 4 Pole 40/63 Amps 25 KA- 02 Nos(ii) Power contactor 4P 100 Amps AC3 duty -02 Nos (iii) Indicating LED for Load ON Mains, Load on Set, Mains ON, DG Set ON(iv) Multi Function Digital Meters with RS-485 - 01 No.(v) AMF Controller with RS-485 DGC-11-6500T- 01 No.(vi) DC Ampere Meter- 01 No.(vii) Start/ Stop push button- 02 Nos.(viii) Auto/ Manual Selector Switch- 01 No (ix) Battery charger SMPS Type 12 to 15 Volt- 01 No.(x) Relay card 24 Volt- 01 No.(xi) MCB 6A/16A, SP, 10 KA C Curve- 08 Nos.(xii) CT suitable size 03 Nos.(xiii) Aluminium Bus Bar with Heat Shrinkable Sleeves 0f capacity 100 Amps- Set of Four.(d) Fuel tank as per manuacturer(e) Base frame made out of suitable channel with adequate Number of anti vibration pads to insure minimum vibration as recommended by manufacture. |
| 3 | Supply, installation,testing and commissioning of transformer outdoor type oil natural air natural (ONAN) cooled, oil immersed copper wound step down complete with first fitting of IS 1180 ISI marked filtered and dehydrated transformer oil and other standard fittings/accesssories as per particular specifications and seven position off circuit tap changer (tapping range +5% to -10% in steps of 2.5% each)with vector group Dyn-11 with HV and LV cable boxes with cable glands as per cable sizes, as persite requirement , HT 11 KV 3 phase 4 wire 50 HZ as per level- III of IS 1180:2014of capacity 25 KVA, 11/0.433V complete all as specified. Note : (i) Pre dispatch inspection of transformer shall be carried out by rep of Accepting officer at manufacturer premises with in overall cost quoted by the contractor . Nothing extra shall be payable on this account at later stage(ii) After installation of the transformer the same shall also be tested byIEM / SEI and all the equipment /instrument shall be arranged by the contractor for testing. The cost of the same shall also be included in the item rate.(iii) Supply, installation,testing and commissioning of transformer outdoor type oil natural air natural (ONAN) cooled, oil immersed copper woundstep down complete with first fitting of IS 1180 ISI marked filtered and dehydrated transformer oil and other standard fittings/accesssories as per particular specifications and seven position off circuit tap changer (tapping range +5% to -10% in steps of 2.5% each)with vector group Dyn-11 with HV and LV cable boxes with cable glands as per cable sizes, as persite requirement , HT 11 KV 3 phase 4 wire 50 HZ as per level- III of IS 1180:2014of capacity 25 KVA, 11/0.433V complete all as specified.(iv) Plinth of required size and design as per manufacturer shall be in the part of this job including earth work. |
| 4 | Supply, laying & testing cable XLPE insulated screened, PVCbedded galvanised steel strip or wire armoured electric power cables (heavy duty) with standard alluminium conductor 11000 volts grade of size 3 core 95 sqmm, complete all as specified and directed. |
| 5 | Supplying and laying synthetic rubber insulated mats 2 mm thick for voltage upto 3.3KV for electric purpose as per IS15652-2006,(superseding IS 5424) suitable for electric shock safety of size 2X1m, complete all as specified and directed. |
| 6 | Supplying and laying synthetic rubber insulated mats 2.5mm thick for voltage upto 11 KV for electric purpose as per IS15652-2006,(superseding IS 5424) suitable for electric shock safety of size 2X1m, complete all as specified and directed. |
| 7 | M & L for Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size95 sqmm, complete all as specified and directed. |
| 8 | M & L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size95 Sqmm, complete all as specified and directed. |
| 9 | Supply installalation commissioning and testing of outdoor HT Feeder pillar box of size 1200X1200X1000mm and3.15 mm thick CRCA Sheet weather and vermin proof CPRI approved with copper bus bar 800 Amps supported on 6 Nos HT bus bar insulator suitable for 12kv, HT cable 11KV 3 core of size upto 185 sqmm including provision of cable entries with glands locking arrangements and angle iron frame and legs of 90 cm long using 60x60x6 mm size MS angle iron fixed in plinth completewithconstruction of Plinth of size 2500X2500X1000mm floor in PCC 1:4:8 type D2 baseincluding neccessary excavation earth work,complete all as specified and directed. |
| 10 | M&L for Chain linkfencing including straining and fixing to steel posts and straning bolts in PCC 1:4:8 type D2 base of appropriate size including neccessary excavation earth work, complete all as specified and directed. |
| 11 | Supply, Install , testing and commissioning of LT panelof suitable size for 3 Phase 415 Volts outdoor type made out 3.15 mm thick CRCA sheet of sides of the panel board and 200 amps rated Alumunium bus bar, insulated with PVC sleaves and coloured with (red, yellow,blue and black) CTR and internal wiring with suitable size of PVC insulated copper wire, use withangle iron 50x50x6 mm frame bottom of the panel board , grouted by using PCC foundation 1 : 2 : 4 type C1 with 20 mm graded stone aggregate , thimbling and cable entry boxes with cable gland incl powder coated complete with following (Main panel) :- (a) MCCB 4 pole 63 amps 25KA,adustable type- 01 No incoming(b) MCCB 4 pole 40 amps 30 KA,adjustable type - 03 Nos (outgoing)(c) Multifunction meter 3PH, size 96x96sqmm digital type(d) LEDIndicator lamp RYB (3 Nos) - 01 Set |
| 12 | Excavation in trenches soft and loose soil not exc. 1.5 m wide and notexceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sqm on planand getting out in soft/loose soil, complete all as specified and directed. |
| 13 | Returning,filling including spreading, leveling watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed. |
| 14 | Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed. |
| 15 | Material and labour for providingsand as in sand cushioning to under ground cable including punning down of sand in layers, complete all as specified and directed. |
| 16 | Material and labour for cableprotection cover of UG LT cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm, complete all as specified and directed. |
| 17 | Material and labour XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 sqmm 4 core, complete all as specified and directed. |
| 18 | Material and labour XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 sqmm 4 core, complete all as specified and directed. |
| 19 | Material and labour for PCC cableprotection cover, class HV, Type 1, flat, of size 300mm x l80mm x 40mm for HT UG cableand gap between adjacent cover not exceeding 10mm , complete all as specified and directed. |
| 20 | Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected to and includingGI strip of size 32x6mmupto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES SSR part I and testing on completion includingnecessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc, complete all as specified and directed. |
| 21 | Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected to and includingGI strip of size 25 x 4 mmupto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES SSR part I and testing on completion includingnecessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc, complete all as specified and directed. |
| 22 | Supply and fixingof cable route indicator made out of cast ironand embedded HT cable and size of the cable on the plate of size 80 mm dia 5 mm thick and grouting lugg of suitable size including in PCC foundation of suitable size, complete all as specified and as directed. |
| 23 | Supply and fixing of GI tubing 100mmlight grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position, complete all as specified and directed. |
| 24 | Material and labour for making bore below the road for crossing the GI pipe medium grade for cable protection and fill the putty on bothsides of the GI pipe after crossing the armoured cable to avoid the water inside, complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Mar 01, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 08, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender