Military Engineer Services-MES has published Tender For Certain Repairs To Flooring, Tilling, Plumbing And Sanitary Fittings At Zone-I And Ii At Lansdowne Under Age I Lansdowne. Submission Date for this Tender is 27-02-2023. Flooring Work Tenders in lansdowne Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-02-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding / terrazo dado etc (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished fair and even complete all as specified and directed. |
| 4 | M&L for coloured glazed ceramic tiles of any design and pattern, 350x250x7mm/450x350x 7 to 8mmthick, on vertical surface as in patch etc including 15mm thick rendering in CM (1:6), set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I). |
| 5 | M&L for Non-skid coloured ceramictiles of any design and pattern, 7 to 8 mm thick, of size each tiles exc. 0.06 sqm but n. exc. 0.11sqm, as in floor etc with and including 20mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed :- Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I). |
| 6 | M&L for Non-skid coloured ceramictiles of any design and pattern, 7 to 8 mm thick, of size each tiles exc. 0.11 sqm but n. exc. 0.18sqm, as in floor etc with and including 20mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed :- Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I). |
| 7 | M&L for vetrified ceramic tiles of light shade9-10mm thick (Square/Rectangular) area each tile exc 0.36 sqm but n exc 0.42 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement over 20 mm thick screed bed in CM 1:6. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed :- Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I).complete all as specified and directed |
| 8 | M&L for 18 mm thick marble stone other than white and blacktable rubbed and polished in cooking plateforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match incl rounded exposed edge complete all as specified and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 9 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 10 | M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror finish polishing over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.) |
| 11 | Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 12 | Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 13 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed |
| 14 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complee with all fittings (such a sbends, elbows, Tee short pieces, connectors back nuts,diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm ISI Marked with all fittings (heavy grade ISI Marked) complete all as specified and directed. |
| 15 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complee with all fittings (such a sbends, elbows, Tee short pieces, connectors back nuts,diminishing pieces, caps and plugs, unions etc) of nominal bore 20mm ISI Marked with all fittings (heavy grade ISI Marked) complete all as specified and directed. |
| 16 | S&F for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 17 | Taking down cement plaster, any desription on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 18 | Material & labour for Rendering 15 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all asspecified and directed. |
| 19 | M&L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as permanufacturer"s instructions on other than fair faces brick/stone or concrete surfaces and finishing surfaceseven & smooth without using extra cement complete all as specified and directed. |
| 20 | Material & labour for Rendering 5 mm thick CM 1:3 on brick or concrete surfaces of ceiling /chajja"s finished even & smooth without using extra cement complete all asspecified and directed. |
| 21 | M&L for preparation of newsurfaces of wall & applying two coats of white wash complete all as specified and directed |
| 22 | M&L forpreparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed |
| 23 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 24 | M&L for brick work with old size full bricksubclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 25 | S&F in repair 15 mm bore bib taps, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: Jaquar, Cat Part No– APR-101037 / Cera, Cat Part No.-F1020151 or euivalent of make as epecified. |
| 26 | S&F in repairs stop valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed. |
| 27 | S&F in repairs stop valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type with long shank and cup (concealed type) complete all as specified and directed.. Make: Cera Cat part F-1015361, Prayag cat part-P-6818 & Jaguar cat partCOS- 103069 |
| 28 | S&F in repairs PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve flaot and handle including bracket complete all as specified and directed. Make: Cera Cat part B-1010108, Prayag cat part-501 & Jaguar cat partESH-WHT-153 NL |
| 29 | S&F in repairsvitreous china squatting pan "orissa pattern 580 mmX 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but incl fixing of "P" or "S" trap with provn of concrete bedding etc complete) complete all as specified and directed. Make: Cera Cat part S-3010110, Prayag cat part-4055 & Jaguar cat partECS-WHT-451 LE |
| 30 | S&F CI Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and directed |
| 31 | S&F in repair vitreous china wash down water closet pan (pedestal pattern EWC), white (excluding fixing bolts, flushing cistern and flush pipe) but including sheet cover and complete all as specified and directed. Make: Cera Cat part S1053104, Prayag cat part-4016 & Jaguar cat partECS-WHT-55155PP |
| 32 | S&F Vitreous china wash hand basin in repair ,white ,flat back of size 550x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends,pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , waste coupling32mm dia of PTMT half or full threaded Min wt 45 gram,complete all as specified and as directed. Make: Cera Cat part S-2040157, Prayag cat part-MIDAS-4642 & Jaguar cat partECS-WHT-801 |
| 33 | M&L for 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed in repairs, all as specified. |
| 34 | S&F CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed. |
| 35 | S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and directed. |
| 36 | S&F in repairs Pillar tap 15 mm dia fancy type, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed make seiko complete all as specified and directed. Make: Cera Cat part F-1015101, Prayag cat part-P-6802 & Jaguar cat partARP 101001M |
| 37 | S& F in repairBrass chromium plated shower rose 125mm size fancy type, with CP neck 9 inch long with swivel joints, incl fixing to steel pipe or union of 15 mm bore complete all as specified and directed. |
| 38 | S&Fin repair Stop Angle valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed ,complete all as specified. Make: Cera Cat part F-1015201, Prayag cat part-P-6810 & Jaguar cat partcos- 103053 |
| 39 | S&F for Soap dish, Stainless steel, approximate size 160x 160x90mm complete all as specified and directed . |
| 40 | S & F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair complete all as specified and directed by EIC. |
| 41 | S&F PVC (SWR ) bend of 75 mm bore pipe of any radius complete all as specified and directed. |
| 42 | S&F in repairs PVC ( SWR ) waste pipe of 75 mm dia bore in any length ,single socketed with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 43 | Discription same as per sl item 42 here in above but 110mm dia complete all as specified and directed |
| 44 | S&F PVC ( SWR ) "P"/"S" trap 110mm bore as required complete all as specified and directed |
| 45 | S&F grating doom 100mm dia with waste hole of PTMT (Min. Wt. 25 gram ) complete all as specified and directed |
| 46 | S&F in repair health faucet with 1 mtr tube & hook (braded Tube) complete all as specified and directed Make: prayag Cat No BEA-85 or equivalent as per specified Appx "C" (List of Make) |
| 47 | S&F for flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified and directed |
| 48 | Dismantlingwater tank of capacity 500 ltr and removing to store of any description complete all as specified and directed |
| 49 | Dismantlingwater tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed |
| 50 | S&F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500ltr hoisted and fixed in position complete incl 20mm PTMT ball valve complete all as specified and directed. |
| 51 | S&F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000ltr hoisted and fixed in position complete incl 20mm PTMT ball valve complete all as specified and directed. |
| 52 | M&L for carrying out the water proofing treatment to Sunken concrete surfaces by cleaning the surfaces with wire brush or scubber to remove hidden dirt,loose particles , laitance & dust nad degrease the surface by using suitable solvents and repair the spoiled concrete portion by saw, cutting the extreme edges of the damaged location to a depth of at least 10 mm to avoid feather edging & to provide strong bond and treating by applying the following process:- (i)M.P.Bcoating or U.R.P coating by apply primer coating of Dr. Fixit Pidicrete URP mix URP : Cement in the ratio 1:1 by volume and apply a coat of Dr. Fixit Pidicrete URP mix URP : Cement in the ratio 1:1.5 by volume. (ii)Dr. Fixit Pidifin 2 K coating first coat. (iii)Dr. Fixit Pidifin 2 K coating final coat. (iv) Plaster 10 mm thick Portland Cement : 50 kg , Washed sand: 150 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & water: 10 lit complete all as per manufacturer"s instructions and apply through authorised application of compony or dealer complete all as specified and directed. NOTE: Contractor shall give 10 year Garauntee for water proofing treatment carried out. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
