Military Engineer Services-MES has published Tender For Repair To Certain Wooden Furniture And Canning Of Different Kinds Of Chairs Under Ge Mh And Rh Kirkee. Submission Date for this Tender is 28-02-2023. Coats and Jackets Tenders in kirkee Maharashtra. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 16-Feb-2023 | AMENDMENT | BOQ | 21-02-2023 |
2 | 21-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-02-2023 |
Sl. No. | Item Description |
1 | Taking down carefully / removing following unserviceable component / member of CHAIR DINING and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No :CHAIR DINING (FD-279, FD-228) |
2 | Rail with suitable holes for canning. |
3 | Front leg . |
4 | Rear leg |
5 | Stiffner |
6 | Back rest |
7 | PVC/hard rubber shoe |
8 | Corner of chair |
9 | Taking down carefully / removing following unserviceable component / member ofCHAIR WRITING and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No.: CHAIR WRITING (FD-250,FD-280) |
10 | Rail with suitable holes for canning. |
11 | Front leg . |
12 | Rear leg |
13 | Stiffner. |
14 | Arm rest . |
15 | Back rest . |
16 | PVC/hard rubber shoe |
17 | Corner of chair . |
18 | Taking down carefully / removing following unserviceable component / member of CHAIR EASY and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No.: CHAIR EASY (FD-229) |
19 | Rail with suitable holes for canning. |
20 | Front leg |
21 | Rear leg |
22 | Stiffner. |
23 | Arm rest |
24 | PVC/hard rubber shoe |
25 | Corner of chair |
26 | Taking down carefully / removing following unserviceable component / member of TABLE DINING 6 / 8 PERSONS and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge Note : (i) Timber shall be of Ist class hard wood Teak (ii) 4 mm thick teak wood beading shall be provided all roundall as shown on drg. Drg No : TABLE DINING 6 / 8 PERSONS (FD-273,30(M)/FD/MAP/-II/03) |
27 | 18/19mm thickPrelaminated MDF Board two side laminated exterior grade type two grade-IISI marked table top fordining 8 persons of size 1800 x 900. |
28 | 18/19mm thickPrelaminated MDF Board two side laminated exterior grade type two grade-IISI marked table top fordining 6 persons of size 1500 x 900. |
29 | Leg of size 75 x 40 x 742 mm |
30 | Long rail of size 25 x 100 x 1800 mm |
31 | Long rail of size 25 x 100 x 1500 mm |
32 | Short rail of size 25 x 100 x 900 mm |
33 | 25 mm thick and 90 mm wide Stiffener |
34 | Corner table dining |
35 | PVC/hard rubber shoe |
36 | Taking down carefully / removing following unserviceable component / member of BED PLYTOP and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No : BED PLYTOP (FD-246) |
37 | Long rail |
38 | 4mm Thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head boardall as per drg. |
39 | 4mm Thick one side teak face ply wood ISI Marked BWR of size 780 x180 mm for foot boards on both side of head boardall as per drg. |
40 | 12 mm thick PlywoodBWR grade for bed top size as per drg |
41 | Bottom rail |
42 | Leg of head board |
43 | Leg of foot board |
44 | Corner made of 1st class teak wood to strengthen long rails and leg. |
45 | M & L for Replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I. with 4mm thick teak wood edging al aroundfor TABLE OFFICE OFFICER WOODEN Drg No.: (DB-4119 /FD-1002) |
46 | M & L for Replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I. with 4mm thick teak wood edging al aroundfor TABLE OFFICE CLERK WOODEN Drg No.: DB-4120 |
47 | M & L for Replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I. with 4mm thick teak wood edging al aroundfor TABLE WOODEN 3" x 3"Drg No. : DB-4120/FD-1007 |
48 | Taking down carefully / removing following unserviceable component / member of TABLE DRESSING LADIES and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE DRESSING LADIES (FD-251/ FD-232) |
49 | Box w/o Drawerof 18/19mm thick prelaminated particle board exterior grade with 4mm thick teak wood beadingfinished with frenchpolishe, all as per existing and fixed complete. |
50 | Sliding glass shutter 5 mm thick of size 550mm x380mm with aluminum channel of table dressing ladies after taking out carefully old existing broken sliding glass with channel, complete as as specified and directed. |
51 | Mirror 366mm x 1220 x 5mm thick of table dressing ladies, complete all as specifed and directed. |
52 | Back frame made out of 6mm thick commercial ply wood and 45mm x 40mm 1st Class teak wood frame, as per existing, complete as specified and directed. |
53 | Chromium plated knob 25mm dia 24mm length of best quality as approved. |
54 | Drawer of12mm thick prelaminated particle board exterior grade approved by GE with 4mm thick teak wood beadingfinished with frenchpolishe all as per existing and fixed complete. |
55 | Legs with frame complete all as specified and directed. |
56 | Taking down carefully / removing following unserviceable component / member ofTABLE DRESSING GENTSand supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE DRESSING GENTS :(FD-230/FD-31) |
57 | Box (size 900 x 300 x 150 mm) w/o drawer of18/19mm thick prelaminated particle board exterior grade approved by GE, with 4mm thick teak wood beadingfinished with frenchpolishe all as per existing and fixed complete. |
58 | Mirror of size 380mm x 760mm x 5.0mm thick all as shown on drg, and directed by the Engineer-in-Charge. |
59 | Back frame made out of 35mm x 25mm 1st Class teak wood& 6mm thick commercial ply grade MR, type BB, all as shown on drg, and directed by the Engineer-in-Charge. |
60 | Chromium plated knob 25mm dia, |
61 | Drawer of table dressing gents as per existing/drawing complete all as specified and directed. |
62 | All as per item No 8.00but Fixing/Fitting of loose /dismantaled / sagged table dressing gents to the wallwith "L" Bracket (Pair) as per drg and all accessories such as screw,clips, plugs, clamps, etc complete all as directed by Engineer-in-Charge. |
63 | Taking down carefully / removing following unserviceable component / member of TABLE BED SIDEand supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE BED SIDE (FD-276) |
64 | 18/19 mm Thick prelaminated Particle board exterior gradefor table top of same size and shape. |
65 | 18/19 mm Thick prelaminated Particle board exterior gradefor table sides of same size and shape. |
66 | 12 mm thickprelaminated Particle board exterior grade for shelf of same size and shape. |
67 | 6 mm thick BWR ply wood for Back conforming to IS: 303 BWR grade all as specified and shown in drg. |
68 | Taking down carefully / removing following unserviceable component / member ofPEG TABLE and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : PEG TABLE (FD-277) |
69 | 18/19 mm Thick prelaminated Particle board exterior gradefor table top of same size and shape with 4mm thick teak wood beadingfinished with frenchpolishe |
70 | Leg |
71 | Long rail |
72 | Short rail |
73 | Stiffener |
74 | PVC/hard rubber shoe |
75 | Taking down carefully / removing following unserviceable component / member of SIDE BOARD and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : SIDE BOARD (FD-1112) |
76 | 18/19 mm Thick prelaminated Particle board exterior gradefor table top of same size and shapeTop with 4mm thick teak wood beadingfinished with frenchpolishe |
77 | 18/19 mm Thick prelaminated Particle board exterior gradefor table sides of same size and shape.with 4mm thick teak wood beadingfinished with frenchpolishe |
78 | 6 mm thick ply wood confirming to IS: 303 BWR grade for Back of size 1200mm x 600mmall as shown on drg |
79 | Powder coated MS Handle 100mm long all as specified and shown on drg. |
80 | 18/19 mm thick prelaminatedparticle board exterior grade in Shutter of size375 x 475 all as per drg. |
81 | 18/19 mm thick prelaminatedparticle board exterior grade in Bottomall as shown on drg |
82 | 18/19 mm thick prelaminatedparticle board exterior grade Shelf all as shown on drg |
83 | Bottom frame with four legs |
84 | Taking down carefully / removing following unserviceable component / member of TABLE CENTRE and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE CENTRE (FD-274) |
85 | 18/19 mm thick of Prelaminated MDF Board two side laminated exterior grade type-II grade-I with 4mm thick teak wood beadingfinished with frenchpolishe for table center Top |
86 | Leg . |
87 | Short rail . |
88 | Long rail . |
89 | PVC/hard rubber shoe . |
90 | Taking down carefully / removing following unserviceable component / member ofTEAPOY WOODEN and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : TEAPOY WOODEN (FD-278) |
91 | 18/19 mm thick of Prelaminated MDF Board Two side laminated exterior grade type-II grade-I for top with 4mm thick teak wood beadingfinished with frenchpolishe |
92 | Leg |
93 | Short rail |
94 | Long rail |
95 | PVC/hard rubber shoe |
96 | Taking down carefully / removing following unserviceable component / member of STOOL DRESSING and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : STOOL DRESSING (FD-252,FD-282) |
97 | Leg |
98 | Short rail |
99 | Longrail |
100 | Taking down carefully / removing following unserviceable component / member of TABLE WRITING and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE WRITING (FD-33/FD-249 /FD-275) |
101 | 18/19 mm thick of prelaminated MDF Board two side laminated exterior grade type-II grade-I for Table Top of size 1145 x 600 with 4mm thick teak wood beadingfinished with frenchpolishe. |
102 | Leg |
103 | 6mm plywoood including chromium plated knobs etc in bottom of drawer all as shown on drawing. |
104 | Stiffner |
105 | Drawers of size 600 x 500 made out of 18 mm prelaminated Particle board exterior grade ISI marked all as per drg complete. |
106 | Lock of drawers 6 lever 50 mm |
107 | PVC/hard rubber shoe |
108 | Long rail |
109 | Short rail |
110 | Rear side 6mm thick ply wood |
111 | Shutter made of 18/19mm prelaminated Particle board exterior grade with 4mm thick beading hung with SS piano type hinges including one knob complete as per drg. |
112 | Taking down carefully / removing following unserviceable component / member of TABLE 3" x 2" WITH OR WITHOUT DRAWER and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and sizecomplete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE 3" x 2" WITH OR WITHOUT DRAWER(FD-42/ FD-283/ FD-224/FD-284/FD-231) |
113 | Long rail of size 25 x 65 x 900 mm |
114 | Short rail of size 25 x 65 x 600 mm |
115 | Leg of size 60 x 60 x 760 mm |
116 | Stiffner side of size 25 x 40 x 600 mm |
117 | Stiffner centre of size 25 x 40 x 900 mm |
118 | Table top of size 900 x 600 made out of 18/19 mm thick prelaminated particle board one side white and other side teak wood finish lamination, for table top with 4mm thick teak wood beadingfinished with french polishe. |
119 | Drawer with knob as per existing shape & size etc complete as per drawing |
120 | Taking down carefully / removing following unserviceable component / member of Table 1200 x 900mm and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : Table 1200 x 900mm. (FD 273) |
121 | Long rail of size 25 x 65 x 1200 mm |
122 | Short rail of size 25 x 65 x 900 mm |
123 | Leg of size 60 x 60 x 760 mm |
124 | Table top of size 1200 x 900 made out of 18/19 mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I with 4 mm thick. |
125 | Timber Bracket of size 75x75x25 mm |
126 | Taking down carefully / removing following unserviceable component / member of BIN LINEN MULTIPURPOSE and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Note : 4 mm thick teak wood beading shall be provided all roundall as shown on drg. Drg No : BIN LINEN MULTIPURPOSE (FD/E6/MAP/09) |
127 | 18/19 mm thickprelaminated Particle board exterior grade of same size and shape as shown on drg. |
128 | Sides made of 18/19 mm thickprelaminatedParticle board exterior grade of same size and shape as shown on drg. |
129 | Back 12 mm thick plywood confirming to IS: 303 BWR grade. |
130 | Chromium plated knobs |
131 | 18/19 mm thick prelaminated Particle board exterior grade for shutter |
132 | 18/19 mm thick prelaminated Particle board exterior grade of same size and shape |
133 | Bottom frame and legs made of 1st class hard wood teak |
134 | Taking down carefully / removing following unserviceable component / member of BOOK CASE and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : BOOK CASE (FD-45) |
135 | 6 mm Thick commercial ply back as per shape and size shown in drawing ofincluding french polishing to match the other parts |
136 | Bottom frame and legs made of 1st class teak wood |
137 | 18/19 mm thick prelaminated Particle board exterior grade for door shutter |
138 | Taking down carefully / removing following unserviceable component / member of CHAIR DINING WITH CUSHION and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : CHAIR DINING WITH CUSHION: (MAP): FD/E6/ MAP/II/04 |
139 | Cushion 32 density 75mm thick for seat duly covered leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge) as per existing shape and sizeas directed by GE. |
140 | Front leg |
141 | Rear leg |
142 | Batten |
143 | Side rail |
144 | 12mm thick BWR plywood for seat. |
145 | Taking down carefully / removing following unserviceable component / member of Chair Easy with Cushion and supply, fixing and tightening new component / memberwith bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : Chair Easy with Cushion FD-358 |
146 | Front leg |
147 | Rear leg |
148 | PVC/hard rubber shoe |
149 | Corner |
150 | Seat of Chair Easy Foam Cushion with Frame (measurement & Size & specification as per Drg) Foam with Cushioned covered with leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge). Providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work including removing old existing unserviceable cushion. |
151 | Back of Chair Easy Foam & Cushion with Frame (measurement & Size & specification as per Drg) Foam with Cushioned covered with leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge).Providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work including removing old existing unserviceable cushion. |
152 | Handle of Chair Easy Foam & Cushion (measurement & Size & specification as per Drg) Foam with Cushioned coverd with leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge).Providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work including removing old existing unserviceable cushion. |
153 | Taking down carefully unserviceable cane form different types of chairs and other furniture articles and M&L for recanning the same with new 2mm wide oval type plastic cane and bordering with 3mm wide plastic cane complete all as shown & as directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail