Indian Oil Corporation Limited-IOCL has published Tender For Installation Of Industrial Kitchen. Submission Date for this Tender is 20-02-2023. Kitchen Equipment Tenders in kidwai Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dish and Pot Wash Area |
2 | SS Soiled Dish Landing Table with Garbage Chute and PVC Bin Trolley - Soiled Dirty Dish Landing Table with Garbage Hole Table Top and High Splash made out of 18 swg S. S. 304 grade table legs made out of 38 mm Sq, S. S. pipe with four-side cross racing with 25 mm Sq, S. S. pipe, and hard nylon adjustable bullets and Garbage chute 153 mm. Dia x 153mm (D) on right hand side of table top. Under the Chute, provide PVC Waste Bin One Pc. |
3 | SS 3 Sink Dish Wash Unit - Top made of SS 18 swg Sheet with Three nos. depressed sink of size 17" x 17" x 12" deep and 6" high splash back. S.S. waste coupling & outlet C.I. ball value, 1.5" Sq S.S. pipe legs and 1" SS Sq. Pipe bracing etc. All Waste valves have 4 ft long Flexible Water waste pipe for drainage. |
4 | SS Clean Dish Glass Rack - 5 SHELF- 4 shelves made of SS 18 swg. 304 Gr. Sheet with 3 sides turned up & 1 side front turned down with perforated shelves having underneath SS Supports. 4 nos. Vertical made of 14 swg. SS angle with nylon adjustable bullets. |
5 | SS Pot Rack - 4 Shelves - Structure made of complete S.S Pipe. Rack 4 shelves are made of 25 mm x 25 mm SS Sq. of 304 Grade pipe and 4 Nos Vertical made out of 38 mm x 38mm S.S. Sq. pipe with hard nylon adjustable bullets. |
6 | Service/Display Area |
7 | SS Straight Glass Display Counter [ General ] for Pastry, Sandwich , Cakes etc. - Unit Top Made of 18 Swg SS 304 Gr. Sheet and Bottom Made of 20 Swg SS 304 Gr. Sheet. Unit have 10 mm thickness Straight Glass with a Sliding Door and 3 Glass Shelves & LED Light system. Elec. Load: 0.5 KW, 220V, AC |
8 | SS Straight Glass Display Counter [Hot] for Snacks. Patties, Burger etc. - Unit Top Made of 18 Swg SS 304 Gr. Sheet and Bottom Made of 20 Swg SS 304 Gr. Sheet. Hot Air Circulation system fix at bottom. Unit have 10 mm thickness Straight Glass with a Sliding Door and 3 Glass Shelves & LED Light system. Elec. Load: 1.5 KW, 220V. |
9 | SS Side Table with 2 Bottom Shelves - SS work table will be fabricated with 18 swg SS 304 grade steel sheet having underneath SS strong structure with two no under shelves. Legs should be made of 38mm SS Sq. Pipe of 16 swg with hard adjustable nylon bullets with four side SS 25 mm Sq. Pipe cross bracing. |
10 | Store Area |
11 | MS Adjustable Storage Rack - Made of MS powder coated paint having adjustable holes for set up the shelves as per suitable height. Unit have 4 nos. Shelves made of 22 swg CRC sheet and Verticals are 14 swg MS Angel duly powder coated. All shelves are all side 25 mm turn down with 12 mm inside hem bend at 90 degree smooth finish. |
12 | Glass Top Horizontal Chest Freezer for Preserve Ice Cream - Capacity 320 Ltrs. |
13 | SS 2 Door Vertical Chiller - CNC fabricated SS construction with interior and the exterior of 20swg SS Sheet. The inner wall will be suitably insulated with 65mm thick PUF. It should have 2 doors, constructed of 18swg SS Sheet. Inside Chamber have Rod Fabricated Adjustable Shelves .It should be fitted with digital temperature indicator, control switches and indicator lights. All Compressor are CE mark and Qianjiang make suitable for R-134A Refrigerant Gas. The equipment should be able to maintain a temperature range of +1°C to +10°C. - 450l. |
14 | Hot Kitchen Area |
15 | SS Induction Oven - Industrial - Oven top made of 18 swg S. S. 304 grade, Perforated three-side panel made of 20 swg S. S. , Non-perforated front panel made of 20 swg S. S., and legs made out of 38 mm Sq. S. S. Pipe with four-side cross bracing with 25 mm Sq, S.S. , Pipe and hard nylon adjustable bullets . Total Elec. Load: 10 KW, 440v, AC |
16 | SS Centre Table with 2 B/S - SS work table will be fabricated with 18 swg SS 304 grade steel sheet having underneath SS strong structure with 2 nos under shelves. Legs should be made of 38mm SS Sq. Pipe of 16 swg with hard adjustable nylon bullets with four side SS 25 mm Sq. Pipe cross bracing. |
17 | SS Low Height Food Rack - 3 Shelves Complete made of SS 304 Gr. 25 mm Sq. Pipe and legs made of 38 mm SS Sq. pipe with adjustable hard Nylon Bullets. Unit having strength of carry 400 kgs weight continuously. |
18 | Hot Food Service Area |
19 | SS Side Table with 2 B/S and Front Tray rail - 3 Side Cover - SS work table will be fabricated with 18 swg SS 304 grade steel sheet having underneath SS strong structure with two nos under shelves. Legs should be made of 38mm SS Sq. Pipe of 16 swg with hard adjustable nylon bullets with four side SS 25 mm Sq. Pipe cross bracing. |
20 | SS 4+2=6 Vessel Hot Food Service Counter with front Tray rail and 1 B/S - SS 6 Vessel Hot Bain Marie with Underneath Bottom shelf - Complete made SS 18 Swg 304 Gr. Sheet with underneath Heavy Structure. Unit have 4 nos. 20 Ltrs. and 2 nos. 10 Ltrs Capacity SS Weld free Square type GN Pan with Lid fit over one Water Tank made of SS 20 Swg 304 Grade Sheet. Front Tray Rail made of SS Sheet having Bid Ripping on top for keeping Dish / Thali. 4 Nos. legs made out of 38mm x 38mm S.S. Sq. Pipe with hard nylon adjustable bullets. Underneath Bottom shelf made of SS 20 Swg SS Sheet. Unit Temperature control with thermostatic Temperature Controller having one Ne. Rotary On-Off Switch. Total Elec. Load: 3 KW, 220V, AC. |
21 | Storages |
22 | Under counter storage built with 19mm thick bwp plywood, finished with 1 mm white laminate inside and coloured laminate as per selection on the outside including all hinges and fittings. Counter width between - 450- 600mm, including Granite. Granite base rate - 100 rs/sqft |
23 | Above counter storage built with 19mm thick bwp plywood, finished with 1 mm white laminate inside and coloured laminate as per selection on the outside including all hinges and fittings. Storage width between - 450mm |
24 | Display shelf - 450 mm wide display shelf - 2400 mm in height, open storage built with 19mm thick bwp plywood, finished with 1mm thick decorative laminate |
25 | Billing counter : as per design |
26 | Seat/back assembly: The cushioned seat should be made of injection moulded plastic outer & inner. Plastic inner should be upholstered with stitched cover and moulded high resilience polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression. The stitched cover should be made from spacer fabric and leatherette. Cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette.seat size : 47.0 cm. (w) x 48.0 cm. (d) back size : 45 cm. (w) x 60.5 cm. (d) visitor tubular frame: the powder coated (dft 40-60 micron) tubular frame should be cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk ms erw tube. The back connected to frame through powder coated (dft 40-60 micron) high pressure die cast connector piece.Overall Dimensions of Chair Seat Height - 44.8cm.Height - 99.5cm.Width-60.9 cm and Depth-64.3 cm. Product should be GREENGUARD GOLD, GRIHA, GRRENPRO, BIFMA LEVEL 2, SCS IAQ, certified. The certificates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturer’s name. The certificate must be verifiable from the authorised issuer"s website. |
27 | Under counter storage built with SS finished all hinges and fittings. Counter width between - 450- 600mm, including SS top |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail