Additional And Alteration Of Armoury At Af Stn Kurseong Under Ge ( Af ) Bagdogra
Tender Value
15.50 Lakhs
Estimated cost
Bid Submission
01 Mar 2023
0 days left
EMD
31000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kurseong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Additional And Alteration Of Armoury At Af Stn Kurseong Under Ge ( Af ) Bagdogra
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Feb-2023 | Other Corrigendum | Other | 01-Mar-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description incl raking out joint hacking for key. Scrubbing down with water complete all as specified and as directed. |
| 2 | Dismantling of brick work or stone masonry built in cement mortar including quoins, arches, pillars etc complete all as specified. |
| 3 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan exec 6m mean radius, built in CM 1:6 all as specified and as directed. |
| 4 | M&L for rendering, 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed. |
| 5 | M&L for rendering, 15mm thickcement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and applying two coats of oil bound distempering over a coat of chalk whitening including preparation of surface complete. |
| 6 | M&L for preparation of new plastered surface and applying two coats of cement base paint over a coat of alkali resistant primer on surface on walls. |
| 7 | S&F Anodized aluminum snap grid size of 605 x 605mmframe work for false ceiling all as specified and Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two un-equal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exec 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, including M&L for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fiber fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulate jointing compound and 48 mm wide fiber tape to provide seam less finish. |
| 8 | Taking down shutters of any description exec 1.00sqm each but not exec 2.00sqm all as specified and as directed. |
| 9 | Taking down Chow hat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames). |
| 10 | All as per item 09 above, but exceeding 1.5 Sqm but not exceeding 4 Sqm each. |
| 11 | S&F factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame jointed with galvanized brackets and stainles steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1m (± 0.1 mm) wall thickness and 3 Nos stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions ofEngineer-in-charge. |
| 12 | S&F factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 13 | S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed. |
| 14 | S&F Aluminium anodized barrel tower bolts extruded section and fixed 150 mm. |
| 15 | S&F Aluminium anodized barrel tower bolts of extruded section and fixed 100mm. |
| 16 | S&F 150mm long aluminum anodized handle of extruded section fabricated type. |
| 17 | S&F 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed. |
| 18 | S&F 300 mm long aluminum anodized sliding door bolts withhasps, staple (bolt type) fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed etc complete. |
| 19 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing. |
| 20 | S&F Solid PVC door frames of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing. |
| 21 | S&F in repairs galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks/wire staples/fitted with beads complete all as specified and directed. |
| 22 | Hacking out old broken glass any thickness or size from wooden or metal frames glazed with putty or beads complete all as specified and as directed. |
| 23 | S&F plain sheet glass pane 3mm thick ordinary quality and glazing with oil putty or beads in square not exec 0.5sqm each pane complete all as specified and as directed. |
| 24 | All as per item No.23 above, but pin headed glass. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | M&L for joint free Non-Skid ceramic coloured tiles, 7 to 8mm thick, grade BII matt superior finish, first quality, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedin cement mortar 1:4 complete all as specified and directed. |
| 27 | All as per item No 26 above on vertical surfaces such as skirting complete. |
| 28 | M&L for glazed ceramic coloured tiles in vertical surface 350mmx250mmx7mm/ 450mmx350mmx7mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed. |
| 29 | S&F in repair mild steel mortice lock, vertical type, size 100mm, 4 levers. |
| 30 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified. |
| 31 | S&F in repair Floor door stopper 150mm long of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor. |
| 32 | S&F in repair in double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified as directed. |
| 33 | S&F in repair Aluminium (Die cast body) door closer hydraulically regulated destination No.3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg. complete all as specified. |
| 34 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified. |
| 35 | Cutting holes in brick wall Exc. Half brick but n.exc full brick built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 complete all as specified. |
| 36 | S&F Metallic thief proof rifle rack ,Two tier type to accommodate40 Nos of AK-103 Rifles without ammunition box and size of Rifle rack shall be\"LENGTH - 72\", \"WIDTH - 16\", \"HEIGHT - 35\" Complete all as specified .Make - Kaypee & Co, Brand - RIFLOK, Model -40RR. |
| 37 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. |
| 38 | M&L for plain cement concrete (1:4:8), Type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 39 | M&L for plain cement concrete (1:2:4), Type B2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete for post embedment complete all as specified as directed. |
| 40 | M&L for precast solid block masonry with PCC 1:3:6, type C-1, wall exceeding 10 cm in width and built in 1:6 cement mortar complete all as specified as directed. |
| 41 | S&F rolled mild steelFe 410-W (Gde-E- 250) quality-A angle as in joist, channel angle, or tee section, fixed independently with connecting base plate etc as in fencing post, strut bend to shape, holes drilled/notches cut to receive MS bolts and barbed wire, embedded to concrete including tarring to steel work embedded to concrete complete all as directed. |
| 42 | S&F mild steel work such as band, clamps, FI fillets for securing wire mesh, straps, ties, etc. and similar works, fabrication for steel sections conforming to Fe-410-0 of Fe- 310-0 including necessary welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated, complete all as directed . |
| 43 | S&F 10 mm dia mild steel round bar (ISRO 10) for fencing including necessary cutting bending etc. conforming to Fe 410-W (Gde-E250) quality complete all as specifiedas directed. |
| 44 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (FE 410-S) including old unserviceable wooden gate complete all as specified and directed. |
| 45 | S&F mild steel bolt , nut, washer (machine made) with hexagonal head at one end and screwed the other end, each screw end to be fitted with two washers and one nut hexagonal, dia of shank 12mm, length of bolt 50mm to 100mm, complete all as directed. |
| 46 | Supply only chain link fencing made out of galvanized steel wire of size4mm dia, size of mesh 100mm x100mm all as specified. |
| 47 | Fixing only of chain link galvanized fencingincluding provn of line wires, of 100 X 100mm mesh size staining bolts etc including provision of binding wire complete all as specifiedas directed. |
| 48 | M&L for PCC 1:2:4, type B-1(Using 20 mm graded crushed stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified as directed. |
| 49 | M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 50 | M&L for preparing new surface plastered or unplastered and applying two coats of cement base paint over primer complete all as specified and directed. |
| 51 | M&L for preparationof previouslyuntreated surface of steel over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified as directed. |
| 52 | M&L for preparationof previouslyuntreated surface of steel n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified as directed. |
| 53 | M&L for Returning, filling in including spreading, leveling, watering and well ramming in layers not exec 25 cm and getting in loose soil all as specified as directed. |
| 54 | M&L of removing excavated material nexc.50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as well as specified. |
| 55 | M&L for preparing new surface of ceilingand applying two coats of oil bound distemper, white or tintover a coat of primer complete all as specified and directed. |
| 56 | NOTES :-1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
AI Tender Summary
Tender Timeline
Feb 18, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 01, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender