|
| 1 | Earth work in excavation for all kinds of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains over areas upto any depth and width including dressing of sides and ramming of bottoms upto any lift including getting out the excavated soil and disposal of excavated earth including carriage of material within all leads, lifts and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 2 | Providing and laying in position cement concrete 1:3:6 (one cement: three coarse sand : six graded, crushed stone aggregate 40mm (forty millimetre nominal size) mechanically mixed and curing and vibrated complete excluding the cost of centeringand shuttering in all works up to all floor levelincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying in position cement concrete 1:6:12 (one cement: six coarse sand : twelve graded, crushed stone aggregate 40mm (forty millimetre nominal size) mechanically mixed and curing and vibrated complete excluding the cost of centeringand shuttering in all works up to all floor levelincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 4 | Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 5 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality/quarry in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded, crushed stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement : six coarse sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and laying 25mm (twenty five millimetre) thick Kota stone slab flooring 20mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeas per specification in all floors including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 7 | Providing and fixing ornamental ready made pillar with anarkali design complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction ofEngineer-in-Charge. |
| 8 | Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-Charge completeas per specification including carriage of material within all leads, lifts and other incidental charges. |
| 9 | Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges. |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge |
| 11 | Providing and fixing of ornamental cast iron water proof outdoor and indoor bench three seater supported with two number cast iron legs each weights 17.5 Kg (seventeen point five kilogram) painted with spray paint and termite proof fixed with 8 Nos. (eight numbers) FRP (Fibre reinforced plastic) seating slats/ strips 1.50 mtr.(one point five zero metre) long and 4mm (four millimetre) thick strong and durable to take load upto 380 Kg. (three hundred eighty kilogram) distributed across the length assembled with fasteners and 16 Nos. (sixteen numbers) plastic end caps for slates complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction ofEngineer-in-Charge. |
| 12 | Finishing with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etecetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction ofEngineer-in-Charge. |
