Tender For Material Requirement For Construction Of Nrlm Work Shed In Nada Gp Limit, Byndoor Taluk.

Sharing tender

Material Requirement For Construction Of Nrlm Work Shed In Nada Gp Limit, Byndoor Taluk. , 100Mm S Or P Trap,Pvc Beading,Silver Oak Or Equivalent Planks 38 Mm Thick,Add Handling , Loading And Unloading At 1% On Material,White Vitreous China Clay Flat Back Wash Basin Size 630X450mm,Labour Charges For Lifting And Placing In Position And Making Connection At 7% On Material,Add White Cement For Pointing At 2% On Material,Tmt Bars Fe 500,Ms Flat,Honne Wood,Copper Plated Brass Piller Tap 15Mm,G.I. Overflow Pipe 20Mm Dia,Mosquito Proof Coupling 25Mm,Alluminium Handles - 15 Mm,Orissa Pattern Of Size 580X440mm With Integral Type Foot Rests,M.S. Holder Bat Clamp 32Mm,M.S Rods,Whitening,Jungle Wood Runners And Planks,Add Watering Charges At 1 % On Labour,Binding Wire,C.P Brass Towel Rail 740Mm Length 20Mm Dia,Broken Stone Aggregate 12 Mm To 10 Mm Size,Casurina Poles 75 - 100 Mm Dia,Mathi/Nandi Wood Planks For Panels 25 Mm Thick,C.I. / M.S. Brackets For Flushing Cistern,Polyenthylene Water Storage Tank Of Specified Capacity L,Enamel Paint,Cib,Glazed Tiles 300X450,Handling Loading And Unloading 3% On Material,Add Brush, Putty, Glue At 5% On Cost Of Paint,Coarse Sand (Zone Iii),Add Providing And Removing Scaffolding At 3% On Labour,Size Stone 20 X 20 X 25 Cms,C.I. / M.S. Brackets For Flushing Cistern,Portland Cement,Electification,Vitrified Tiles 600X600 Mm,Add Brush At 1% On Cost Of Paint,Rubber Beading For Shutters Beading,Broken Stone Aggregate 40 Mm Size,Plasticizer / Super Plasticizer,Casurina Poles 100 - 150 Mm,Add Brush, Putty, Sand Paper, Roller At 5% On Cost Of Paint,Dry Distemper,Mixer (Concrete) - 1 Cum Capacity,Latrite,Ready Mix Primer Paint (Ready Mix Red Lead Paint),G.I. 32Mm Dia Telescopic Flush Pipes With Fittings Specials,Cleat Angles,Hom Of Machinaries For Planing,Honnewood Planks For Panels 20 Mm Thick,Powder Coated 60-70 Micron,Cp Brass Chain With Plug,Trasportation,Add Wire Brush, Fine Steel Wool, Putty, Sand Paper, At 3% On Cost Of Paint,Add Hom Of Welding And Grinding Machine @ 4% On Material,Add Handling , Loading And Unloading At 2% On Material,Add Watering Charges At 1 % On Material,Carpenter Assistant,Nylon Rollers,Stone Chistler Class Ii,Chrominum Plated Screws,Mason Class Ii (With Tools),Add White Lead Paint, Gasket, Cement, Sand For Making Good The Wall And Floor At 2% On Material,Bond Stone 20 X 20 X 45 Cm,Broken Stone Aggregate 20 Mm Size,P.V.C. Flushing Cistern 10 Lts Low Level With Fitting,Boulders,Add Cutting And Other Wastage 5%,Licenced Plumber With Tools,Add Sundries Charges At 2 % On Material,Brass Stop Cock,Hom Of Vibrator 0.71 Days,Fitter Class I,C.P Brass Screw 25Mm With Washer,Add Hom Of Welding And Grinding Machine @ 2% On Material,Cp Brass Waste 32 Mm Of Standard Pattern,Add Sundries Charges At 1 % On Labour,Stone Aggregate(Single Size): 10 Mm Nominal Size,5.50 Mm Thick Plain Glass,Border Tiles 30 X 10 Cms,Painter Class I,Lead Or Pvc Connection Pipe 32Mm Dia (For Wash Basin),Special For Overflow Pipe,Mixer (Concrete Small Used In Culvert),Alluminium Tower Bolt - 20 Cm,Add Sundries Charges At 1 % On Material,Wooden Cleats,Ceramic Tiles 30 X 30 Cms,Mason Class I (With Tools),C.P Brass Bracket,Fabricator,Enamel Metal Paint,Stone Aggregate(Single Size):20 Mm Nominal Size,Welder Grade I