Tender For Laying & Fitting Of Delivery And Distribution Mains Consisting Of Gms Tubes And Ductile Iron Pipes Of Different Nominal Bores Along With Pipe Fittings And Control Valves Incl. Other Allied Works. Const. Of Grounds Srs & Filtration Plants Execut
Tender Value
3.11 Crore
Estimated cost
Bid Submission
16 Feb 2023
0 days left
EMD
6.23 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thuroo → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying & Fitting Of Delivery And Distribution Mains Consisting Of Gms Tubes And Ductile Iron Pipes Of Different Nominal Bores Along With Pipe Fittings And Control Valves Incl. Other Allied Works. Const. Of Grounds Srs & Filtration Plants Execution Of Ancillary Civil Works Like Spring Covers, Boundary Walls, Protection Works Etc At Various Water Supply Schemes Of Division Dharmari Of Jammu Province Of Ut Of J&K, Under Jal Jeevan Mission ( Jjm ) Water Supply Scheme Thuroo.1. Consruction Of Collection Tank = 7Nos2. Construction Of Zonal Tank = 5Nos3. Construction Of 14No 5000Gln Gsr4. Construction Of 01No 20000Gln Gsr5. Construction Of Rope Crossing = 3Nos6. Construction Of Chain Link Fencing = 2Nos7. Laying And Fittng Of G.I Pipe Of Differnet Dia
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed inall kinds of soils. |
| 2 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work.G.I Pipe 100 mm dia |
| 3 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work.G.I Pipe 80 mm dia |
| 4 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work.G.I Pipe 65 mm dia |
| 5 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work.G.I Pipe 50 mm dia |
| 6 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 40 mm dia |
| 7 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 32 mm dia |
| 8 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 25 mm dia |
| 9 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 20 mm dia |
| 10 | Laying and fitting of G.I pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 15 mm dia |
| 11 | Laying and fitting of HDPE pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. HDPE Pipe 50mm dia |
| 12 | Laying and fitting of HDPE pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. HDPE Pipe 40mm dia |
| 13 | Laying and fitting of HDPE pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. HDPE Pipe 32 mm dia |
| 14 | Laying and fitting of HDPE pipe ( all classes)complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket,additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. HDPE Pipe 25 mm dia |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 25 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 16 | Carriage ofG I Pipesfrom Departmental Store at Jammu by Mechanical Transport to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 150.0Km |
| 17 | Carriage ofG I Pipes by Manual mean from Road side (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance ofAverage5.0km |
| 18 | Carriage ofHDPE Pipesfrom Departmental Store at Jammu by Mechanical Transport to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 150.0Km |
| 19 | Carriage ofHDPE Pipes by Manual mean from Road side (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance ofAverage5.0km |
| 20 | Earth work inbulk excavation by Manualmeansover areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil |
| 21 | Dumping andfilling of stone in Horizontal on level |
| 22 | Providing and laying in position cement concrete of 1:4:8 mix (1 cement 4 coarse sand 8 graded stone agg. 40 mm nominal size) excl. cost of centring and shuttering all work up to plinth level (using crushed stone agg.) |
| 23 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (using crushed stone agg.) |
| 24 | Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workabilitywithout impairing strength and durability as per direction of Engineer-incharge..All works upto plinth levelNote: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. |
| 25 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V levelNote: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. |
| 26 | Providing & Incorporating (during concreting) GP sheet strip water seal 1.25mm (nominal thick) at construction joints including jointing of ends so as to form a continous barrier, strip area (excluding laps) to be measured (width upto 20cm) |
| 27 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 28 | Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15°upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with M-20 graded concrete 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 29 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto/above plinth level. Thermo -Mechanically Treated bars of grade Fe-500D or more |
| 30 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete40mm thick with 20mm nominal size stone aggregate |
| 31 | White washing with lime to give an even shade. New Work (three or more coats) |
| 32 | Centring and shuttering including strutting, propping etc and removal of form work for foundation,footings, base for columns etc. |
| 33 | Extra for shuttering in circular work |
| 34 | Centring and shuttering including strutting, propping etc and removal of form forwalls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 35 | Extra for shuttering in circular work |
| 36 | Centring and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, G Irders, bressumers and cantilevers. |
| 37 | Extra for shuttering in circular work |
| 38 | Centering and shuttering including strutting, propping etc. and removal of form for:Arches, domes, vaults upto 6 m span |
| 39 | Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platforms. |
| 40 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded. |
| 41 | 12mmthick Cementplaster ontheroughsideofsingleorhalfbrickwallof mix: 1 : 4 ( 1 cement : 4 coarse sand) . |
| 42 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1:3 ( 1 cement : 3 coarse sand) . |
| 43 | Extra for plastering on circular works. |
| 44 | Providing and mixing water proofing material ofapproved make in cement concrete work @ 1 kg per 50 kg of cement. |
| 45 | Providing and fixing on wall for unplastcised riG Id PVC rain water pipes including jointing with seal ring 75mm dia. |
| 46 | Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece as in manhole cover on top of the dome/spring cover with locking arrangement. |
| 47 | Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm |
| 48 | Providing and fixing G.I. chain link fabric fencing of required width & height in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-inchargemade of GI wire of dia 4mm [complete Job] |
| 49 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 20 mm nominal bore |
| 50 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm nominal bore |
| 51 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 32 mm nominal bore |
| 52 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm nominal bore |
| 53 | Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etccomplete |
| 54 | Making connection of G I distribution branch with G IMainby providing and fixing tee, union incl. cutting and threading of pipe etc complete25mm to 40mm dia. |
| 55 | Providing & Fixing brass bib cock of approved quality 15 mm nominal bore |
| 56 | Providing & fixingbrass ferrule with C.I . Mouth cover including boring & tapping the main 15 mm nominal bore |
| 57 | Carriage of sand & stone aggregate (Crushed) upto 40 mm by Mechanical Transport from source (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance ofAverage44km |
| 58 | Carriage of sand & stone aggregate (Crushed) upto 40 mmby Manual mean from Road side (to be identified by Engineer in charge) to site of workincluding cost for loading , unloading & stacking for an av. distance ofAverage2km |
| 59 | Carriage ofstone from nearest local nallah (to be identified by EngIneer in Charge) by Head load to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage2.0km |
| 60 | Carriage ofcement & steelfrom nearest market (to be identified by EngIneer in Charge) by Mechanical Transport to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage46.0km |
| 61 | Carriage of cement by Manual mean from Road side (to be identified by Engineer in charge) to site of workincluding cost for loading , unloading & stacking for an av. distance ofAverage 2.0km |
| 62 | Carriage of steelby Manual mean from Road side (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance ofAverage2.0km |
| 63 | Providing & installation of Sign Board of size 8ft x 6ft with angle Iron frame of size 50 x 50 x 6 mm PBI sheet of 1.25mm thickness including painting and writing as directed by Engineer- In- charge. |
AI Tender Summary
Tender Timeline
Feb 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender