Tender For Commissioning Of The Foul Sewerage System With Laying Of D.I. Pipe Line, Construction Of Pump House Procurement And Installation Of Suitable Pump Set At Sector-13, Cda, Bidanasi, Cuttack
Tender Value
1.02 Crore
Estimated cost
Bid Submission
24 Feb 2023
0 days left
EMD
1.02 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
cuttack → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Commissioning Of The Foul Sewerage System With Laying Of D.I. Pipe Line, Construction Of Pump House Procurement And Installation Of Suitable Pump Set At Sector-13, Cda, Bidanasi, Cuttack
BOQ
| Sl. No. | Item Description |
| 1 | Part-A- DI/CI Sewerage Pipe line at CDA, Sector-13, CuttackSupplying all labour T & P for cutting of following types of road including removing the excavated materials as per direction by EIC.Metal road cutting |
| 2 | Earth work excavation in all kinds of soil in pipe line trenches within initial leadof 50 mt and initial lift of 1.5m including dressing and levelling the bed and compacting etc. all completeas per specification & direction direction of EIC. |
| 3 | Supplying all labour materials T & P for laying of the following D.I. Pipes in trenches including aligning in proper position etc. complete as per specification & direction direction of EIC.600 mm dia |
| 4 | Supplying all labour materials T & P and making of the following D.I. Pipes & specials for the following diameter including testing of joints as perspecification & direction of EIC.600 mm dia |
| 5 | Supplying , fittings of specials for D.I. pipes @3% of total pipe weight including all labour, material and T & P as per P.H.specification & direction of EIC. |
| 6 | Supplyingall materials, labour, T & Pand fabricating & laying Mild steel pipes of following diameter confirming to IS3589/2001 & IS3601/2006 all completeas per P.H.specification & direction of EIC.600 dia M.S. Pipe |
| 7 | Flame cutting and facing of the following dia M.S. pipe from 6.5 mm to 10mm thick including cost of all labour T & P etc. all complete as per specification & direction of EIC.600 mm dia |
| 8 | Butt welding & jointing of M.S. pipes at site by using welding generator set & including cost of welding materials, labour T& P etc. all complete as per direction of E.I.C. |
| 9 | providing flanged joints to pipe and fittings of the following nominal diameter including supplying jointing materials, labour T & P and & testing of the joints as per P.H specification all complete. |
| 10 | Supplying all materials labour T & P for16mm thick M.S. Flange of following dia of M.S. pipes, specials & valves with wastages including cost, taxes & conveyance of materials etc. all complete.600 mm dia M.S. flange |
| 11 | Painting two coat with anti alkali & anti acid bitumen paint (IS-158) on M.S. pipes & specials after scraping, cleaning & washing the surface by wire brush including cost of all labour, materials taxes, transportation to site T & P etc all completeas per P.H specification all complete. |
| 12 | Back filling with excavated materials in distribution pipe line trenches including watering , ramming & compacting etc. all complete as per direction of Engineer-in-charge. |
| 13 | Supplying all materials labour & T and P & making lead caulked joints for DI pipes & specials with molten lead for the following diameter including testing of joints as per P.H. specification & direction of Engineer-in-charge. |
| 14 | Removal of surplus excavated materials after refilling the pipe line trenches & redoing the road surface including loading, unloading and carriage by mechanical means & depositing away within 5 km radius from work site as per the specifiaction and direction of engineer-in-charge. |
| 15 | Part- B- Commissioninig of Sewersge Pumping set at CDA, Sector-13, CuttackSupply, Installation and testing of commisioning of submersible sewerage KRTU pumping set having discharge Q=50 m3/Hr at a Head of 20mtr of reputed make suitable for 300 mm dia bore (20 Hp) including cost , conveyance, taxe4s, etc with control pannel etc. complete including as per specification & direction of the Engineer-in-charge. 100% stand by 2x20=40 Hp |
| 16 | Supply of submerssible electric cable 10core of ISI marl confirming to IS 694-1992 of reputed make including cost, taxes & transportation etc. complete.as perspecification & direction of the Engineer-in-charge.6mm2x10 core round cable |
| 17 | Supplying & laying of 95Sq mm 3 1/2 core insulated pvc sheathed (heavy duty) armoured aluminium cable working volatage up to 1100 volt confirming to IS-1554-part -1of reputed make including cost, taxes & transportation etc. complete as perspecification & direction of Engineer-in- charge. |
| 18 | Supplying & fixing of 200 Amp extension type Kitkat with making Iron standetc. all complete including cost & conveyance, taxes of all materials to siteas perspecification & direction of Engineer-in- charge. |
| 19 | Supplying & fixing of 3 phase 100 Amp double brake TPN main switch with MS frame and nut bolt etc. all complete including cost & conveyance , taxes of all materials to siteas perspecification &direction of Engineer-in- charge. |
| 20 | Supplying all materials , labour, T & P wiring the main with 3x19x16 PVC copper wire inside 50 mm dia PVc conduit pipe with running earth from meter board to kitkat , kitkat to main switch & main switch to pannel boardetc. all complete including cost & conveyance,taxes of all materials to siteas perspecification & direction of Engineer-in- charge. |
| 21 | Supplying & fixing of street light fitting with aluminium metalic body with arcylic cover etc. all complete including cost,taxes & conveyance of all materials to siteas perspecification & direction of Engineer-in- charge. |
| 22 | Supplying all materials , labour, T & Pfor making earthing with supply of 40 mm GI pipe of 3 mtr long & flange with all type of earth work and filling Charcoal etc. all complete including cost taxes & conveyance of all materials to siteas perspecification & direction of Engineer-in- charge. |
| 23 | Supplying all materials , labour, T & P for laying in trenches the following sizes of MS pipe ( O.D.) confirming to IS-3589/2001 & IS-3601/2006 as for PH specificationetc. all complete including cost taxes & conveyance of MS Pipe etc. all materials to siteas perspecification & direction of Engineer-in- charge.168.30 mm OD M.S. EWR pipe (6.3 mm Thick) |
| 24 | Supplying all materials , labour, T & P for flame cutting & facing of MS Plate up to 6 mm thicketc. all complete including cost, taxes & conveyance as perspecification & direction of Engineer-in- charge. 16x0.53=8.48 |
| 25 | Supplying all materials , labour, T & Pproviding joints by welding with two welding beads/passconfirming to IS 816/1998 to MS pipe & fitting at site etc. all complete including cost & conveyance as perspecification & direction of Engineer-in- charge. a) single 60^0 Butt welded : 2x8.48=16.96 mtr2x10x0.53=10.60 mtr27.56 mtr |
| 26 | Supplying all materials , labour, T & P for fitting & fixing of following size M.S. flangeetc. all complete including cost & conveyance taxesas per direction of Engineer-in- charge. |
| 27 | Supplying all materials , labour, T & P for flange joint confirming to IS 3114/1994 for jointing M.S. / C.I. fittingetc. all complete including costof nut & bolt & rubber inseration & conveyancetaxes as per direction of Engineer-in- charge.150 mm dia Flange joint |
| 28 | Supplying all materials , labour, T & P for making G.I. column pipe including cutting , threading, facing & welding G.I. Pipe with flange of 12 mm thick of following dia of G.I. Pipe ( medium) including drilling 5/8\"\" size hole 8 nos in each flange column pipe of 3 mtr lenghtetc. all complete including cost, taxes & transportation etc.as perspecification & direction of Engineer-in- charge.100 mm dia GI Flange column pipe of 3 mtr length |
| 29 | Supplying all materials , labour, T & P for fitting & fixing of 150 mm dia C.I. D/F sluice valve with wheel of rating PN-1 confirming to IS- No- 14846/2000etc. all complete including cost , taxes, transportation etc. all complete as perspecification & direction of Engineer-in- charge. |
| 30 | Supplying all materials , labour, T & P for fitting & fixing of 150 mm dia C.I. D/Fswing check type refluxe valves (NR Valve) confirming to IS No-5312 (part-1) including cost , taxes, transportation etc all completeas perspecification & direction of the Engineer-in-charge.a)150mm dia |
| 31 | Supplying all materials , labour, T & P for fitting & fixingMS thrust plate (500mmx500mmx16mm thick) for sewerage sump MH cover including cost and transportation etc all completeas perspecification & direction of the Engineer-in-charge. |
| 32 | Supplying all materials , labour, T & P for fitting & fixing150mm MS erection clamp (600mmx100mmx16mm thick)including cost taxes and transportation etc all complete as perspecification & direction of the Engineer-in-charge. |
| 33 | Supplying all materials , labour, T & P for lowering of new submersible pumping set with flange joint including supply of nut, bolt, rubber inseration and other jointing materials taxes & transportationetc all completeas perspecification & direction of the Engineer-in-charge. |
| 34 | Part- C- Construction of pump house at sector 13,CDA,Cuttack.Earth work excavation in all kinds ofsoil upto the required depth including levelling and dressing the bed & depositing the excavated materials away from the work site within initial lead and lift including cost, conveyance, taxes of all materials and all labour, T&P, etc. complete as per the specification and direction of Engineer in charge. |
| 35 | Supplying & filling in the foundation and plinth with good quality of river sand compacting properly including watering, ramming with cost, conveyance royalties, taxes of all materials and cost of all labour with T&P sundries required for the work etc. complete (Measurement will be taken on finished compacted section) as per the specification and direction of Engineer in charge. |
| 36 | Providing & Laying Cement Concrete (1:4:8) using 40mm(1 1/2\")size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing, centring & shuttering for covering columns, scaffolding etc.complete to required levels laid in layers not exceeding 0\"-6\" thick including all cost, conveyance, taxes, royalties of all materials and all labour, T&P, etc. complete as per the specification and direction of Engineer in charge. |
| 37 | Providing & laying cement concrete of prop (1:1.5:3) using 12mm size down graded screened washing hard black crusher broken granite chips of approved quality from approved quarry including lowering, compacting concrete laid in layers, mixing chemicals,watering and curing including scafolding charges with cost, conveyance, royalities and taxes of all materials,cost of all materials,cost of all labour,T&P etc.as per required for the work complete and as per direction of Engineer-in-Charge.(excluding cost of reinforcement,centring & shuttering) |
| 38 | Straightening, cutting coiling of bent up HYSD Bar or Tor steel of approved brandincluding cutting, bending, binding, welding and jointing with necessary & tying the grills & placing in position as required for RCC works. Hoisting, lowering, laying including all cost, conveyance, taxes of M.S. Rod or tor steel ( payment will be made on standard weight of BIS for MS Rods or tor steel only) and labour T&P etc. complete as per the specification and direction of Engineer in charge. |
| 39 | Providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty,taxes etc all complete as per specification and direction of Engineer in charge.a. Footing |
| 40 | b.coloumn beam |
| 41 | c.lintel |
| 42 | d.roof slab |
| 43 | Providing all materials labour T&P for first class fly Ash Brick masonary workin Cement Mortar (1:6) in F&Pusing approved quality of fly Ash bricksof size (25cmx25cmx 8cm) and to the IS Specification having crushing strength not less than 75 kg/cm2 with dimentional tolerance ± 8 percente after immersing bricks in water for 6 hours before use etc. complete,from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck including splays, cutting,circular moulding, chamfering, curbelling and similar such type of work etc. complete as per drawing & desiging and specification including racking out joints watering, curing, scaffolding including cost, conveyance, royalities, taxesof all material, and cost of labour T&P required for the work etc complete as per direction of Engineer in charge. |
| 44 | Providing all materials labour T&P for first class fly Ash Brick masonary workin Cement Mortar (1:6) in Super structureusing approved quality of fly Ash bricksof size (25cmx25cmx 8cm) and to the IS Specification having crushing strength not less than 75 kg/cm2 with dimentional tolerance ± 8 percente after immersing bricks in water for 6 hours before use etc. complete,from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck including splays, cutting,circular moulding, chamfering, curbelling and similar such type of work etc. complete as per drawing & desiging and specification including racking out joints watering, curing, scaffolding including cost, conveyance, royalities, taxesof all material, and cost of labour T&P required for the work etc complete as per direction of Engineer in charge. |
| 45 | Providing & laying cement concrete of prop (1:2:4) using 12 mm size crusher broken granite chips of approved quality from approved quarry including lowering, compacting concrete laid in layers, mixing chemicals,watering and curing including scafolding charges with cost, conveyance, royalities and taxes of all materials,cost of all labour,T&P etc.as per required for the work complete and as per direction of Engineer-in-Charge. |
| 46 | Providing 12mm thick Cement Plaster in cement mortar (1:4) in all floors finished smooth to outside surface of brick walls after racking out joints, scraping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scafolding, screening sand etc. complete with all cost, conveyance, taxes, royalties of all materials and all labour, T&P sundries required for the worketc. complete as per the specification and direction of Engineer in charge. |
| 47 | Providing fitting & fixingof M.S.window Grills, M.S. Gate inwallsmade out with 10mm x 10mm square bar & 35 mm x 35 mm x 5 mmflat as per approved drawing and design including priming with red oxing primer of approved quality with cost of all materials and all labour, T&P cost conveyance and taxes of all materials etc. complete in all respect as per the specification and direction of Engineer in charge.ms door, ms window |
| 48 | ms grill |
| 49 | Painting two coats with distemperof approved shade by means of brush to the inside surface of walls after cleaning the surface including all cost, conveyance, taxes of all materials and all labour, T&P, Sundries required for the work etc. complete as per the specification and the direction of Engineer in charge. |
| 50 | Painting two coats with Water proofingweather seal coat of approved shade over a coat of primer by means of brush to the out side surface of walls after cleaning the surfaceetc complete in all walls including all cost, conveyance, taxes of all materials and all labour, T&P, Sundries required for the work etc. complete as per the specification and the direction of Engineer in charge. |
| 51 | Painting two coats with approved synthetic enamel paint of approved shade, colour to new/ old wood work over a coat ofred oxide primer including all cost, conveyance, taxes of all materials and all labour, T&P, etc. complete as per the specification and the direction of Engineer in charge. |
| 52 | Supplying & filling in foundation and plinth with excavated earth including watering, ramming with cost, conveyance royalties, taxes of all materials andlabour with T&P sundries required for the work etc. complete (Measurement will be taken on finished compacted section) as per the specification and direction of Engineer in charge. |
| 53 | Providing 2.5 cm thick A.S flooring in Cement Concrete (1:2:4) using 12mm(1/2\")size hard crusher broken granite chips of approved quality and from approved quarry including lowering, laying concrete, watering, curing including punning etc.complete including cost, conveyance, taxes, royalties of all materials and all labour, T&P, etc. complete as per the specification and direction of Engineer in charge. |
| 54 | Supplying all materials labour and T&P and for wiring the light /plug point with supply 1.0 sqm pvc copper wire 5 amp F/T switch with angle holder/ ceiling rose over pvc board wiring inside 20mm dia pvc with supply of iron board and baklite over all etc complete as per the specification and direction of Engineer in charge.a. Light point & fan point |
| 55 | b. plug point |
| 56 | Supplying all labour and T&P and fitting fixing of 32 amps DP main switch for light point on G.I board over baklite cover all complete with line connection etc complete as per the specification and direction of Engineer in charge. |
| 57 | Supplying all labour and T&P and fitting fixing of bulk head fitting with 23 watt CFL bulb etc complete as per the specification and direction of Engineer in charge. |
| 58 | Supplying all labour and T&P and fitting fixing of 40 watt tube light fittings complete set with tube light in side the pump house bulb etc complete as per the specification and direction of Engineer in charge. |
| 59 | Supplying all materialslabour and T&P for wiring the power plug point with supply of 2.5 sq mm pvc copper wire with 15amps F/T switch with socket wiring in side 20mm dia pvc pipe with supply iron board and baklite cover etc complete as per the specification and direction of Engineer in charge. |
| 60 | Supplying all materialslabour and T&P for fitting fixing of 1400 mm size ceiling fan or reputed make etc complete as per the specification and direction of Engineer in charge. |
AI Tender Summary
Tender Timeline
Feb 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender