}

Tender For Development Of Civil Construction And Allied Works For Installation Of Molasses Tank At Gazole Feed Plant, Gazole, Malda, gazole-West Bengal

Animal Resources Development Department has published Tender For Development Of Civil Construction And Allied Works For Installation Of Molasses Tank At Gazole Feed Plant, Gazole, Malda. Submission Date for this Tender is 25-02-2023. Civil Work Tenders in gazole West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

36140398
Corrigendum : Tender For Development Of Civil Construction And Allied Works For Installation Of Molasses Tank At Gazole Feed Plant, Gazole, Malda
Open Tender
Indian
West Bengal
gazole
25-02-2023

Tender Details

Development Of Civil Construction And Allied Works For Installation Of Molasses Tank At Gazole Feed Plant, Gazole, Malda

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 22-Feb-2023 C o r r i g e n d u m - 1 Date 25-02-2023

Key Value

Document Fees
Refer document
EMD
INR 7238.0 /-
Tender Value
INR 3.61 Lakhs /-

BOQ Items

Name of Work :Development of Civil construction and Allied Works for Installation of Molasses Tank at Gazole Feed Plant, Gazole, Malda.
Sl. No. Item Description
1CIVIL PART
2Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete ncluding the cost of supply of sand. (payment to be made on measurement of finished quantity Do - by fine sand
3Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
4Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade i) Pakur Variety
5Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
6Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
7Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (a) 1:3:6 proportion
8Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster
9Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
10Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
11M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design,irection of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) For trusses spanning up to 12.00 m
12Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work)(a) In Roof
13TAXES & DUTIES
14Add: G.S.T. @ 18%
15Add: CESS @ 1%
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail