Installation Water Purification Plant And Water Atm
Tender Value
10.89 Lakhs
Estimated cost
Bid Submission
21 Feb 2023
0 days left
EMD
21786
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
magrahat → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Water Purification Plant And Water Atm
BOQ
| Sl. No. | Item Description |
| 1 | Water ATM |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. a) Depth not exceeding 1.50 m. |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) |
| 4 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 5 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filing joints with powdered earth or local sand |
| 6 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. |
| 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. |
| 8 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) a) 25 mm. to30 mm. th. Hard wood plank |
| 10 | Reinforcement for reinforced concrete work inall sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. ( TATA , SAIL , RINL ) |
| 11 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 12 | b) In Superstructure |
| 13 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in Firstfloor. |
| 14 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer\"s specification.. |
| 15 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal : Malayasian |
| 16 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hige and other fittings. In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 35mm thick shutters with 19mm thick panel of size 30to 45 Cm.(b) Sishu,Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 17 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 18 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary)and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface andapplication of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. c) 35 mm. th. |
| 19 | Neat cement punning about 1.5 m. th. In wall dado etc. |
| 20 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster |
| 21 | (ii) With 1:4 cement mortar (b) 15 mm thick plaster |
| 22 | (ii) With 1:4 cement mortar (c) 10 mm thick plaster |
| 23 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification.iii) Two coats. |
| 24 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) a) 40 mm. x 6mm x 200 mm. long |
| 25 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm. |
| 26 | Iron socket bolt of approved quality fitted and fixed complete. |
| 27 | (c) 150mm long x 10mm dia bolt. |
| 28 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. |
| 29 | (c) 300mm long. |
| 30 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. |
| 31 | (d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. |
| 32 | i)50 mm dia. boring etc. |
| 33 | ii) 100 mm dia. boring |
| 34 | (f) For depth more than 150 metre for 50 mm dia. tube well with topenlargement of 100 mm dia. |
| 35 | i) 50 mm dia. boring etc. beyond 150 metre |
| 36 | Supplying , fitting and fixing steel cutter piece up to 450 mm long with sockets(ii) 40 mm dia |
| 37 | Supplying high density polythene strainer of approved make with adapterconforming to I.S. specifications. (i) 50 mm dia |
| 38 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(a) 50mm dia |
| 39 | (b) 100 mm dia |
| 40 | Supplying, fitting and fixing PVC Reducing Socket (100 x 50 ) |
| 41 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 42 | Collecting sample of water for baeteriological, chemical and arsenic test from any depthy at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 43 | Supply, fitting & fixing Plug of approved make conforming to IS code |
| 44 | Supply, fitting & fixing Sub-merssible pump complete with electrical cable line and controle panel. |
| 45 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) |
| 46 | (A) For Exposed Work |
| 47 | 32 mm |
| 48 | 25 mm |
| 49 | (A) For Concled work |
| 50 | 15 mm |
| 51 | 20 mm |
| 52 | Supplying, fitting and fixing gunmetal wheel valve of approved brand andmake tested to 21 kg per sq. cm. (for water lines only). 32 mm |
| 53 | 25 mm |
| 54 | 20 mm |
| 55 | Supplying, fitting and fixing bib cock or stop cock.a) (ii )Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 56 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer b) 3000 lit Capacity |
| 57 | Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 1st story from G.L. |
| 58 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 59 | Supply and installation of water purification system with necessary accessories in proper method with filling activated alumina etc. or any other patent as recommended by american water works corporation and as directed by the authority including cost of containers chemicals and other accessories complete in all respect upto the satisfaction of the authority.( Quatation to be taken ) |
| 60 | Supplying and Installation of Commertial Digital RO Water ATM Machine ( Quatation to be taken ) |
| 61 | Supplying, fitting & fixing Name Plate /Photography |
| 62 | Add 18% GST |
| 63 | Add 1% L&W cess |
AI Tender Summary
Tender Timeline
Feb 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender