Kerala State Electricity Board-KSEB has published Tender For Construction Of 11Kv Line From Puliyilangadi To Kalathingalpadi To Avoid Cross Country Line Under Es Anakkayam. Submission Date for this Tender is 20-02-2023. Transmission Line Tenders in anakkayam Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. |
| 2 | Additional rate for providing one disc set on any type of HT pole for making cut point. |
| 3 | Fitting one Additional V cross arm in existing single pole incl. conveyance of materials. |
| 4 | Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 5 | Fitting one additional HT pin with insulator |
| 6 | Additional rate for excavation of Pit for A type pole in Laterite. |
| 7 | Additional rate for excavation of Pit for A type pole in Hard Laterite. |
| 8 | Traffic signal painting of pole 1.5m height using black and white paints in alternate rings of 25cm width incl. cost of paint as specified. |
| 9 | Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification). |
| 10 | Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole). |
| 11 | Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials. |
| 12 | Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls. |
| 13 | Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls. |
| 14 | Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. |
| 15 | Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. |
| 16 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. |
| 17 | Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary. |
| 18 | Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. |
| 19 | Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling. |
| 20 | Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite. |
| 21 | Renewal of existing damaged/old 11kV TW/RSJ/Rail Pole with new A type pole in place and refitting of all items incl. conveyance (except pole). |
| 22 | Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 23 | Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits. |
| 24 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite. |
| 25 | Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 26 | Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 27 | Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. |
| 28 | Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. |
| 29 | Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling. |
| 30 | Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite. |
| 31 | Renewing damaged PSC/RCC Transformer DP structure with new A type Transformer DP and re- erecting all accessories & Transformer (excluding renewal of pipe earthing). |
| 32 | Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. |
| 33 | Fitting one set AB switch and giving connection |
| 34 | Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials. |
| 35 | Drilling hole of various sizes on existing Channel/Cross Arm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
