Military Engineer Services-MES has published Tender For Repairs To Mes Installations, Oht, Power House, Pump House, Generator Room, Store Yard, Parapet Walls, Hardstanding And Mes Colony At Ins Mandovi Under Ge (P) Navy Mandovi. Submission Date for this Tender is 06-03-2023. Electric Generator Tenders in North Goa Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-02-2023 |
| 2 | 28-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-03-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on stone/ PCC block/ brick wall / top of chajja etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris to outside of INS Mandovi Area including filling of open joints in cement mortar 1:6 complete all as specified and directed. |
| 2 | M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete wall surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M & L for rendering 15 mm (10+5) thick on fair faces of brick work or concrete wall surfaces in cement mortar 1:4 in two layers i.e first layer 10 mm thick and 5 mm thick outer layer mixed with WPC as per manufacturer"s instruction and surfaces finished even and smooth without using extra cement complete all as specified and directed. Note : Quoted rate shall be deemed to be inclusive of rate for WPC |
| 4 | M & L for rendering 5 mm thick in cement mortar 1:3 on fair faces of brick work or concrete ceiling surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for preparation of newly plastered wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 6 | M & L for preparation of newly plastered wall surfaces, applying chalk whiting preparatory to distempering and distempering with two coats of distemper oil emulsion complete all as specified and directed. |
| 7 | M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 8 | M & L for preperation of old plastered wall surface including washing down, rubbing down and stopping of distempered wall surfaces, applying 1 mm thick wall care putty wherever required and applying one coat of oil bound distemper complete all as specified and directed. |
| 9 | M & L for preperation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particles, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying one coat of acrylic emulsion exterior paint complete all as specified and directed. |
| 10 | M & L for preparation of old plastered wall surfaces and applying one coat of white wash complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 12 | M & L for rendering 10 mm thick on fair faces of brick work or concrete vertical surfaces as back coat for tiling in cement mortar 1:4 complete all as specified and directed. |
| 13 | M & L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 14 | M & L for providing glazed ceramic coloured tiles in vertical surface, 300 x 200 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 15 | M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 16 | M & L for providing chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors (over plinth protection), with grey cement and no pigments complete all as specified and directed. |
| 17 | M & L for providingkota stone slab 20 - 25mm thick laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 18 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 19 | M & L for providing 100 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in sub-floors, sub-bases, floors etc complete all as specified and directed. |
| 20 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 21 | M & L for providing machine pressed precast conctete interlocking paver block any shape and size, of 60 mm thickness, M-35 grade, rubber moulded confirming to IS 15658-2006, fixed with grey cement & pigment complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 23 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; of Gde Fe 290 Gde E- 165), also fastening and fixing complete all as specified and directed. |
| 24 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 25 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 26 | S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 27 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar for ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 28 | M & L for pre-cast cement concrete block masony with solid blocks of precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate), exc 10cm in width and set in cement mortar 1:6 complete all as specified and directed. |
| 29 | M & L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete wall surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M & L for preparation of newly plastered wall surfaces and applying two coats of white wash complete all as specified and directed. |
| 31 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 32 | Dismantling steel post or struts, any section, embedded in concrete/ brick work/ masonry including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 33 | S & F mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 34 | S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long and diameter of neck 5 to 10 mm complete all as specified and directed. |
| 35 | M & L for providing TMT bars mild steel bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for stiffner of chainlink fencing complete all as specified and directed. |
| 36 | Supply only PVC coated chain link fencing with 3mm dia galvanised steel wire, size of mesh 75mm x 75mm, weight exc 2.0 kg per sqm but n.exc 2.50 kg per sqm complete all as specified and directed. |
| 37 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 38 | Taking down steel tubing and connections of 15 mm dia bore complete all as specified and directed. |
| 39 | Taking down steel tubing and connections of 20 mm dia bore complete all as specified and directed. |
| 40 | Supplying and laying of CPVC pipes of 20 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 41 | Supplying and laying of CPVC pipes of 25 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 42 | S & F in repairs 2 in 1 health faucet with hook, chromium plated, with 1.5 m tube complete all as specified and directed. |
| 43 | S & F in repairs stop valve of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/ 20mm- 92gms) |
| 44 | S & F in repairs pillar taps of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. ( Note: Minimum weight 15mm-110gms) |
| 45 | S & F in repairs bib tap, standard, of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/20mm- 125gms) |
| 46 | S & F in repairs bib taps (long body), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm dia bore complete all as specified and directed. |
| 47 | S & F in repairs stop valves, copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends, for iron pipes or for unions of 15 mm dia bore complete all as specified and directed. |
| 48 | S & F in repairs pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with fly nuts screwed for iron pipes of 15 mm dia bore complete all as specified and directed. |
| 49 | S & F in repairs swivel shower of PTMT (minimum weight 40gm), any colour for fixing with 15mm dia pipe and shower arm of 15 mm size, 195mm long with 45 degree bend and flange of PTMT any colour complete all as specified and directed. |
| 50 | S & F in repairs brass chromium plated shower rose, 125 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 51 | S & F PVC connections of 15 mm size and 450 mm long with PTMT nuts complete all as specified and directed. |
| 52 | Taking down shutters of any descrption not exceeding 1.0 sqm eachfrom chowkhats, complete all as specified and directed. |
| 53 | Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified and directed. |
| 54 | Taking down chowkats or frames not exceeding 1.5 sqm each complete all as specified and directed. |
| 55 | Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and directed. |
| 56 | S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 57 | S & F 2nd class hard wood, 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and directed. |
| 58 | S & F factory made plain framed, panelled shutter (two panel) of 35 mm thick, with 2nd class hardwood rail and style, with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 59 | M & L for preparing new wooden surfaces of any description exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 60 | S & F factory made panelled FRP door shutter, 30 mm thick with 2 mm FRP lamination top rail of size 30 x 150 mm; lock rail & bottom rail of size 30 x 150 mm with 12 mm thick panels of FRP section of box type construction as per IS 4020, core shall be polyurethane foam / high density (more than 40 kg per cubic meter) cellurar foam done in situ and fixed in position as per manufacturer"s instructions complete all as specified and directed. |
| 61 | S & F 100mm X 63 mm size factory made FRP door frame, frame fixed with 3 nos on either side with MS flat iron 25mm x 3mm, cut to size & made to shape & fixed as in hold fast after necessary tarring & sanding and fixed as per manufacturer"s instructions; with 2 mm thick FRP lamination, core made of polyurethane foam/ high density (more than 40kg per cubic meter) cellular foam done in situ including provision of second class wooden blocks to hold the fittings complete all as specified and directed. Note: Size of chowkats shall be inclusive of 2mm thick FRP lamination. |
| 62 | S & F mild steel ordinary rat tail door springs (capsule type), 300 mm long, including roller and roller plate complete all as specified and directed. |
| 63 | S & F extruded aluminium alloy handles, 150 mm long, fabricated type, anodised complete all as specified and directed. |
| 64 | S & F aluminium anodised, barrel tower bolts of extruded section and 150 mm length complete all as specified and directed. |
| 65 | S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 66 | S & F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 67 | S & F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden doors complete all as specified and directed. Note : Wooden beading will not be measured separately if changed during repairs. |
| 68 | S & F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to aluminium windows complete all as specified and directed. Note: Aluminium u-clips will not be measured separately if changed during repairs. |
| 69 | S & F in repairs 32 mm dia waste pipe, 800 mm long complete all as specified and directed. |
| 70 | S & F in repairs 19 mm dia decorative curtain rods of anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
