Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Annual Maintenance Contract Of Machinery At Various Workshop Under Ewd, Aligarh. Submission Date for this Tender is 28-02-2023. Cutting Crimping and Punching Tools Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Feb-2023 | OMDate | Date | 28-02-2023 |
| Sl. No. | Item Description |
| 1 | Visit Charges of Service Engineers at the time of Break down of installed Machineries & Fire Hydrant Systems as per Complaint send by Assistant Engineer/ J.E. of Concern Workshop under Electricity Workshop DivisionAgra for detecting /finding out the fault, including the arrangement of all T&P & safety equipments within time period mentioned in terms & conditions. |
| 2 | Supply & Replacement of following spair Parts for Maintenance & Repair / Overhauling Of workshop machinery. 1.Electric Oven |
| 3 | Supply & Replacement of U Type heater Canthol D With MGO SS 304SS Type Fince (IPH/Peragon Make) cap. 1.0 (ONE) KW |
| 4 | cap. 1.5 (ONE) KW |
| 5 | cap. 2.0 (TWO) KW |
| 6 | Supply & Replacement of Contactor 3 pole with auxlary contact ,ISI Mark(L&T / Schneider C&S,ABB, Make) cap. 25 Amp. |
| 7 | cap. 18 Amp. |
| 8 | Over load relay /mpcbscheinder,abb,c&s,make , 2.5 A to 25 Amp |
| 9 | Supply and Replacement of Contactor 3 pole with auxlary contact ,ISI Mark(L&T / Schneider C&S,ABB, Make) 40 Amp |
| 10 | 65 Amp |
| 11 | L.T. DIGITAL VAF METER, SELEC/MULTISPAN/AE MAKE |
| 12 | 2 Position selector switch with NO, NC elements make C &S, Mediamac, Schneider |
| 13 | Emergency stop |
| 14 | Supply and Replacementof Electric wire with 4 mm/6mm glass wire |
| 15 | Supply and Replacement of MCB 3 pole with neutral,ISI Mark(C&S/ABB/ Schneider ANCHOR/HPL/Make) 32 Amp. |
| 16 | Supply and Replacement of MCB 3 pole with neutral,ISI Mark(C&S/ABB/ Schneider ANCHOR/HPL/Make) 63 Amp. |
| 17 | Supply and Replacement of Single phase preventer (VSP2) (L&T/Schneider Make) |
| 18 | Supply and Replacement of Temperature controller (Selec/ Multistar/ Autonics) |
| 19 | Supply and Replacement of Thermostate (Selec/ Multistar/ Autonics) |
| 20 | Supply and Replacement of Indicator ( C& S/ FTC, ABB, Mediatac) |
| 21 | Supply and Replacement of Blower (as per sample) |
| 22 | Supply and Replacement of Copper Lugs 4mm/6mm |
| 23 | Power Connector 6 Amp to 63 Amp Make FTC mediatac, Connectwell |
| 24 | Controll realay 2NO + 2NC with auxlirey contact make C&S, ABB, Omron, Salzer |
| 25 | WOOL FELT SIZE MIN 12MM |
| 26 | Heat resistance packing 3mm,6mm,9mm thick, x 25-50MM |
| 27 | Heal Resistance packing silicon |
| 28 | Nutbolt washer/ POP RIPIT Hardware |
| 29 | OV/UV/UB/SP Make Procom,ABB C&S, Schneider |
| 30 | H.T. /L.T. Winding Machine |
| 31 | Supply and Replacement of Tensioning Arrangement of H.T. Winding Machine |
| 32 | Supply and Replacement of Gear 10 D.P.E. |
| 33 | Supply and Replacement of Turn counting meter |
| 34 | Supply and Replacementof Brake Shoe |
| 35 | Supply and Replacement of V- Belt ( Cotex Make) |
| 36 | 1 H.P Phase Dol Starter With SPP, UV, OV Control System |
| 37 | 2H.P. Phase Dol Starter Make C & S, L&T, ABB. |
| 38 | 3H.P. Phase Dol Starter Make C & S, L&T, ABB. |
| 39 | Supply and Replacement of Reverse Switch (Bentex/L&T) |
| 40 | Supply and Replacement of Bearing (NBC/ SKF Make)No. 6205 |
| 41 | Supply and Replacement of Bearing (NBC/ SKF Make)No. 6206 |
| 42 | Supply and Replacement of Bearing (NBC/ SKF Make)No. 6208 |
| 43 | Supply and Replacement of Bearing (NBC/ SKF Make)No. 6304 |
| 44 | Supply and Replacement of Bearing (NBC/ SKF Make)No. 6305 |
| 45 | Supply and Replacement of Bearing (NBC/ SKF Make)No. 6009 |
| 46 | Supply and Replacement of Bearing (NBC/ SKF Make) No. 6208 |
| 47 | Supply and Replacement of Bearing (NBC/ SKF Make) No. 6309 |
| 48 | Supply and Replacement of Bearing (NBC/ SKF Make) No. 6005 |
| 49 | Supply and Replacement of Bearing (NBC/ SKF Make) No. 6004 |
| 50 | Supply and Replacement of Bearing (NBC/ SKF Make) No. 6001 |
| 51 | Supply and Replacement of Pulley size 5" double group A section |
| 52 | Supply and Replacement of Pulley size 2.5" TO 7" Six group A/B section |
| 53 | Supply and Replacement of Tension arrangement of pulley |
| 54 | Supply and Replacement of Fiber pulley |
| 55 | Supply and Replacement of Gear 5 D.P. |
| 56 | Supply and Replacement of Gear Oil. (Volvolin / Castrol / HP Make) |
| 57 | Supply and Replacement of Foot Switch contactor 16 Amp. (BCH/FS Make) |
| 58 | Supply and Replacement of Contactor 12/18 Amp. ( L&T/ Schneider/ C&S / ABB) |
| 59 | Supply and Replacement of Gear Box with NBC / SKF Bearing |
| 60 | Supply and Replacement of Center on tail Stock |
| 61 | Supply and Replacement Of LT/HT Machine Main Shaft |
| 62 | Supply and Replacement of LT Machine Shaft Nut |
| 63 | Supply and Replacement Of main Motar base For LT Machine |
| 64 | Suppy of gearbox HT/LT Machine |
| 65 | Supply of tension adjustable Screw |
| 66 | Supply of Belt adjustable assambly with Pullly |
| 67 | Hydraulic Trolley |
| 68 | Supply & Replacement of Moving Wheel cast iron make |
| 69 | Supply & Replacement of Hydraulic Oil( Castel Make) (Volvolin / Castrol / HP Make) |
| 70 | Supply & Replacement of Bearing for hydrolic Trolley(NBC/ SKF Make) |
| 71 | Supply & Replacement of Wheel Pin |
| 72 | Supply & Replacement Frame of Roller |
| 73 | Supply & Replacement Shaft for Roller |
| 74 | Supply & Replacement Fork Frame |
| 75 | Supply & Replacement Bearing with Spacer |
| 76 | Supply & Replacement Loading Roller |
| 77 | Supply & Replacement Linking Plate |
| 78 | Supply & Replacement Supporting Base Bracket |
| 79 | Supply & Replacement Ring for excel (Retaning ring) |
| 80 | Supply & Replacement Front wheel |
| 81 | Supply & Replacement Front wheel shaft |
| 82 | Supply & Replacement .Fork Arm Joint |
| 83 | Supply & Replacement Frame for Fork |
| 84 | Supply & Replacement NOG of fork wheel |
| 85 | Supply & Replacement Lock nut M6 |
| 86 | Supply & Replacement Fork wheel nylon taper 80*70 |
| 87 | Supply & Replacement Operating Handle Base |
| 88 | Supply & ReplacementOperating Handle Liver |
| 89 | Supply & Replacement Hydrolic Chain |
| 90 | Supply & Replacement Copper Washer |
| 91 | Supply & Replacement O,Y Ring (31.5, 65*2.65) |
| 92 | Supply & Replacement Cylinder Cap |
| 93 | Supply & Replacement Pumpseal kit |
| 94 | Supply & Replacement Washer Kit |
| 95 | Supply & Replacement Spring pin kit |
| 96 | Supply & Replacement Pump Service Kit |
| 97 | Supply & Replacement Retaining Ring Kit |
| 98 | Supply & Replacement Of iron sheet 1.2MM |
| 99 | Electric Hoist 3/5 Ton |
| 100 | Re-Winding of 3 Phase Induction Motor of hoist including required material 3 HP |
| 101 | Supply & Replacement ofM.S. Shaft for Motorised Chain Pulley 3/5 Ton |
| 102 | Supply & Replacement of Megnatic Clutch |
| 103 | Supply & Replacement of ON/OFF REV/FOW UP/DOWN Remote |
| 104 | Supply & Replacementof 1sq MM, 10Core, Flexible Copper Cable with rope.Lenght 8Mtr. |
| 105 | Supply & Replacement of Electro Megnatic/ Disk type Break |
| 106 | Supply & Replacement ofBreak Coil |
| 107 | Supply & Replacement ofgears as per sample |
| 108 | Supply & Replacement ofOver Load Relay as per sample |
| 109 | Electric Motor |
| 110 | Repairing and Re-Winding of 3 Phase Induction Motor including required material 1 HP |
| 111 | Repairing and Re-Winding of 3 Phase Induction Motor including required material 2 HP |
| 112 | Repairing and Re-Winding of 3 Phase Induction Motor including required material 3 HP |
| 113 | Supply & Replacement of Motor Air Fan |
| 114 | Shearing Machine |
| 115 | Blade Grinding Charges |
| 116 | Blade Shap making Charges |
| 117 | Supply & Replacement of Spring |
| 118 | Weghing Machine |
| 119 | Supply & Replacement of Display Card (as per sample) |
| 120 | Supply & Replacement of 6 Volt Battery (Amaron, Vacrom/ Taxmo make) |
| 121 | Supply & Replacement of Load Cell (as per Sample) |
| 122 | Welding Machine ( Except Portable Type) |
| 123 | Supply & Replacement of Coil (as per sample) |
| 124 | Supply & Replacement of Brass Made Connector (as per sample) |
| 125 | Supply & Replacement of LEAD (as per sample) |
| 126 | Supply & Replacement of Welding Holder 350 amp |
| 127 | Fire Hydrant System |
| 128 | Complete Overhauling of 15 hp Diesel Engine |
| 129 | Supply & Replacement of brass made Valve 4" |
| 130 | Supply & Replacement of Pump (as per sample) |
| 131 | Supply & Replacement of RRL Pipe 9 (15 Meter) |
| 132 | Supply & Replacement 12 Volt Battery (Amaron, Vacrom/ Taxmo) |
| 133 | Repairing of Battery Charger system |
| 134 | Supply & Replacement of Engine Oil make Servo/Castrol/Volvoline |
| 135 | Supply & Replacement of Oil Filter |
| 136 | Supply & Replacement oF Diesel Filter |
| 137 | Supply & Replacement of Dieselpipe for pump |
| 138 | Supply & Replacement of Silencer / Air Cleaner. |
| 139 | Supply & Replacement of Packing Kit |
| 140 | Air Compressor |
| 141 | Supply of 2 HP Compressor |
| 142 | Supply & Replacement of Pipe for Compressor with 02 Nos. Clip (10 Mtr Long) |
| 143 | Supply & Replacement of brass made SPRAY PRINTING GUN For Compressor |
| 144 | Compresure Pully as per Sample |
| 145 | Supply & Replacement of Air Compressor Fan |
| 146 | Supply & Replacement of Air Filter |
| 147 | Supply & Replacement Air Safety Electric Control Switch |
| 148 | Supply & Replacement Air Compressure of Crank Set |
| 149 | Supply & Replacement of Air Balv/Nipple |
| 150 | REPAIRING OF COMPRESSOR HEAD |
| 151 | Submersible |
| 152 | Repair & Rewinding of Submersible Pump & Motor |
| 153 | Supply & Replacement of Submersible Pump & Motor (varuna/Crompton/ Jindal make) |
| 154 | Supply & Replacement of Submersible pump Starter (C & S, Varuna, Jindal ,L & T) |
| 155 | Sealling Fan & Exhaust |
| 156 | Repair & Rewinding of Sealling Fan |
| 157 | Supply & Replacement of new Sealling Fan 60 watt.Make Crompton/Hevels/Anchor/Usha |
| 158 | Repairing & Rewinding of Exhaust 18/24" |
| 159 | Supply & Replacement of Exhaust 18/24" Make Crompton/Hevels |
| 160 | Supply & Replacement of Capacitor 3.5 µ F |
| 161 | Supply & Replacement oF wire 1SqMM Wire Make KEI/ Havels /Gloster/Anchor |
| 162 | Testing Bench |
| 163 | Supply & Replacement ofKV Meter for Oil BDV Test Set |
| 164 | CABLE COPER 3X2.5SQ MM |
| 165 | Water COOLER |
| 166 | Supply & Replacement R.O. (50 LTR) |
| 167 | RE-FILLING of Cooling Gas |
| 168 | Supply & Replacement Cooling Coil |
| 169 | REPAIRING OF COMPRESSOR |
| 170 | OIL FILTER(CENTRIFUSE) MACHINE |
| 171 | Supply & Replacement Oil Flow Meter |
| 172 | CABLE COPER 3X2.5SQ MM |
| 173 | Supply & Replacement Oil Flow Pump 3/4 inch |
| 174 | Dismentling, Rewinding & Refixing Oil Discharge Moter 1 HP |
| 175 | Supply & Replacement Oil Filter cartrige for 1250 LPH machine |
| 176 | Supply & Replacement Vaccume Meter 0-700 psi |
| 177 | Supply & Replacement Temprature Meter 0-150 C |
| 178 | Supply & Replacement Flote Switch |
| 179 | Supply & Replacement Oil Pipe 3/4 inch |
| 180 | Supply & Replacement Oil Valve 3/4 inch |
| 181 | Supply & Replacement Packing 1.5 mm to 6.0 mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
