Tender For Special Rep And Addn Altn To Building No P34a And P252 And Addn Altn To Roof Of Certain Bldg Under Ge Narangi
Tender Value
43.67 Lakhs
Estimated cost
Bid Submission
25 Feb 2023
0 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
narangi → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Rep And Addn Altn To Building No P34a And P252 And Addn Altn To Roof Of Certain Bldg Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, orfor shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed. |
| 2 | Excavating in post holes (or similar holes) each not exceeding0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc50m and making good surfaces in soft/loose soil complete all as specified & as directed. |
| 3 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed. |
| 4 | Removing of surplus excavated material not exc 50mand depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed. |
| 5 | M&L for hardcore of broken stoneor boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed. |
| 6 | M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed. |
| 7 | M&L PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) inhold fast block or bed block complete all as specified and as directed. |
| 8 | M&L for RCC 1:2:4 type B1(20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed. |
| 9 | M & L Precast RCC1:2:4Type B-1 ( Using 20mm graded stone aggregate)as in landings, cover slabs ( for manhole etc) chullah hoods, chajjas , water toughs, mangers, shelves and similar articles with plain facesset in CM 1:4 complete all as specified and directed. |
| 10 | M&LFormwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) complete all as specified as directed. |
| 11 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the followingof treatment/specification from bottom to top:-(i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100 mtr distance from starting point.(ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum),weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall beapplied over bituminous primer as specified above overby torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying two coat of aluminium paint over theAPP modified membrane @ 0.11Kg/sqm. |
| 12 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 13 | M&L for brick work with old size sub class \"B\" bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified as directed. |
| 14 | M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified as directed. |
| 15 | Taking down chowkats or frames with shutters(without taking off shutters from the frame) areanot exceeding 1.5 Sqm each including builders hardware complete all as specified and as directed. |
| 16 | Taking down chowkats or frames with shutters(without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed. |
| 17 | Taking down shutter of any descriptionexc 1 Sqm but n exc 2 Sqm each complete all as specified anddirected. |
| 18 | Taking down shutter of any descriptionexc 1 Sqm but n exc 2 Sqm eachand refixing in same openingcomplete all as specified anddirected. |
| 19 | S&F 35mm thick factory madesecond class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc(with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed. |
| 20 | M&L for 1.25mm thick factory made pressed steel frames of size 105x60mmwith single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete including PCC 1:3:6 type C-0 as in back filling of window/door frame all as specified and directed. |
| 21 | M&L for 1.25mm thick factory made pressed steel frames of size 125x60mmwith single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete including PCC 1:3:6 type C-0 as in back filling of window/door frame all as specified and directed. |
| 22 | S&F 35 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed. |
| 23 | Cutting holesin brick walls not exceeding half bricks in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3and cement concrete 1:2:4 type B-1complete all as specified and directed.( Depth of embedded portion of hold fasts or lugs shall be measured from the face of the jamb into the wall). |
| 24 | S&F steel window with side hung shutterglazed shutter ibncluding both side openable ( outsude glazed window and inside fly proof window) including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.( Guard bar or square bar shall be measured and paid seperately). |
| 25 | S&Fsoccond class hard wood small fittings such as brackets of any type latch and hinges blocks ,shaped door and window stops and thelike including all necessary labours, articles not exceeding 200 cucm each complete all as specified and directed. |
| 26 | S&Fsteel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and as directed. |
| 27 | S&F floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring of overall length of cover plate 140mm fixed in floor complete all as specified & directed. |
| 28 | S&F Aluminium body ( extruded section) Door closure hydraulically regulated designation no.3 universal type suitable for door shutters of 851to 1000mm in width and weight between 61 to 80 Kg and fixedcomplete all as specified and directed. |
| 29 | M&LDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed . |
| 30 | Providing and fixing powder coated aluminium ( minimum thicknesss of powder coating 50 micron) work for doors, windows, ventilators and partitions ( fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS-733 and IS- 1285, fixed with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc complete all as specified and directed. |
| 31 | S&F steel ventilators with top hung shutters includinghinges , steel peg stay complete all as specified & as directed . |
| 32 | S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1 |
| 33 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed. |
| 34 | S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 35 | S & F 75 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 36 | S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed. |
| 37 | S&F 150mmsize extrudedaluminium handles, casttype, anodised complete all as specified and directed. |
| 38 | S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing boltand sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed. |
| 39 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed. |
| 40 | S&F in repairstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed. |
| 41 | M&L in repair for seccond class hard wood weather boarding , clean sawn, plain19/20mm thick or feather edged 15/20mm thick and fixed with 30mm laps complete all as specified and as directed. |
| 42 | Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed. |
| 43 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & as directed. |
| 44 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screwscomplete all as specified and directed. |
| 45 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specifiedcomplete all as specified and directed. Note:To be executed for provision of ridges and hips. |
| 46 | S&F, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement designer Board (E-Board Classic)in & including a grid of GI system duly suspended with 4mmdia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed. |
| 47 | S&F, in repair suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement designer Board (E-Board Classic)in & including a grid of GI system duly suspended with 4mmdia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed. |
| 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 49 | M & L for rolled mild steel work main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410 W ( Gde-E-250 ) quality B complete all as specified and as directed. |
| 50 | S&F rolled mild steel plates ( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk)forming holes, withoutany attachment confirming to Fe-410-W (Gde-E-250) quality Bcomplete all as specified & as directed. |
| 51 | M&L TMTsteel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 52 | M&Lwelded steel wire fabric of weight not exceeding 4 kg per square metre fixed to wood or steel members complete all as specified & as directed. |
| 53 | M/L cutting chases , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc. and making good , cutting exceeding 20cm girth complete all as specified and directed. |
| 54 | M/L 12mm thick prelaminated particle board BWA type melamine finished ( both side) for fixing the bottom panel of the partition/door including necessary fittings, gusket, angle cleats, screws etc complete all as specified and directed. |
| 55 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & as directed. |
| 56 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long 11 to 15mm dia of shank complete all as specified & as directed. |
| 57 | Demolition of cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 58 | Demolition of plain cement concrete (Un-reinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed. |
| 59 | M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates)as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and asdirected. |
| 60 | M&L for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with bitumastic compound etc complete all as specified and as direted. |
| 61 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed. |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed. |
| 63 | M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 64 | M & L for glazed ceramic coloured tiles 375x250x7mm/300x200x7mm /450X300X7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 65 | M&L for double chargedpremium quality 10mm thick Vitrified tiles light shadearea of each tile n exc 0.36sqmlaid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 66 | M&L for double chargedpremium quality 10mm thick Vitrified tiles light shadearea of each tile n exc 0.36sqmas vertical surfaces such asin skriting dado e etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 67 | Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed. |
| 68 | M&L for 20-25mm thick Cudappah stoneslabflooring laid over cement screedbase 20mm thick in CM 1:6 laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing complete all as specified and directed. |
| 69 | M&L for 18-20mm thick Kota stoneslabflooring laid over cement screedbase 20mm thick in CM 1:6 laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing complete all as specified and directed. |
| 70 | M&L for 18-20mm thick Kota stoneslabas in vertical surfaces like skirting and dados over cement screedbase 10mm thick in CM 1:3 laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing complete all as specified and directed. |
| 71 | M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm butn exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6)complete all as specified and directed. |
| 72 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 73 | M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 74 | M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 75 | M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thickmixed with liquid water proofing compound (@ 200ml per 50 kgweightof cement or as per manufacture\"s instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note :Water proofing compoundwill be measured and paid separately as \"Supply only\". |
| 76 | S&F in repairsolid PVC wall lining/panelling consisting of 5mm plain colour PVC sheet including solvent cement and fixing at site on PVC frame and necessary beading complete all as specified and as directed. |
| 77 | S&F5mm thick PVC sheet fillet 35mm for wall panelling inclusive of fixing on wall to make PVC frame complete all as specified and as directed. |
| 78 | Taking down eaves gutterand rain waterpipes ( any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. including cleaning or refifixingor removal to store ( measured overall as fixed along the centreline over fittings and accessories ) complete all as directed. |
| 79 | Supply only liquidintegral water proofing compound complete all as specified and as directed. |
| 80 | M&L Preparing surfaces of wood and wood based materials,steel/metal surface of any description and girth not other wise describedand treating small articles such as stop covers gully gratings,holdfast ends of posts, backs of chowkats,with tar or coal tar black paint etc,area tarred not exc 0.1 sqm each complete all as specified & as directed. |
| 81 | M&L complete removal of existing treatment of plastered surfaces of wall applyingwall care putty of 1mm thick average thickness and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed. |
| 82 | M&L complete removal of existing surfaces of wall and applying two coats of acrylic exterior weather resistant paint (weather proof paint) of tint as approved over a coat of weather proof primerover a coat of 1mm thick wall care putty complete all as specified and as directed. |
| 83 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 84 | M&L for preparation of newwall surface and applying two coats of acrylic exterior weather resistant paint (weather proof paint) of tint as approved over a coat of primer over 1mm thick wall care puttycomplete all as specified and as directed. |
| 85 | M&L for preparation of old plastered surfaces ofceiling and applying one coat of white wash complete all as specified and as directed. |
| 86 | M&L for preparation of old plastered surfaces ofwall and applying one coat of white wash complete all as specified and as directed. |
| 87 | M&L for preparation of new plastered surfaces ofceiling and applying three coats of white wash complete all as specified and as directed. |
| 88 | M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. |
| 89 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 90 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 91 | M&L for preparation of new steel or iron surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 92 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 93 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding0.50sqm ineach pane complete all as specified and directed. |
| 94 | S&F 5mm thick sheet glass, tinted quality in door or partition wallexceeding0.50sqm ineach pane complete all as specified and directed. |
| 95 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding0.50sqm ineach pane frosted on one side complete all as specified and directed. |
| 96 | S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up/down old tubing including fittings complete all as specified and as directed. |
| 97 | S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up/down old tubing including fittings complete all as specified and as directed. |
| 98 | S & F GI tubing 25mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up/down old tubing including fittings complete all as specified and as directed. |
| 99 | S&F in repair 15mm diabrass angle valve complete all as specified and directed. |
| 100 | S&Fin repair 15mm dia Bib taps quarter turn cast copper alloy chromium plated, with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 101 | S&F in repair15mm bore pillar taps quarter turn cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 102 | S&F in repair 15mm bore dia of concealed stop valves cast copper alloy fancy type chromium plated with long shank and cupcomplete all as specified and as directed. |
| 103 | S&F in repairrotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 104 | S&F in repairrotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 105 | S&F in repair 20mm dia ballbrass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ballscrewed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed. |
| 106 | S&F in repair aluminium anodised tubular 600mm long Towel Rail fixed with screws and wooden/plastic cleats etc. complete all as specified and directed. |
| 107 | S&F in repair chromium plated soap dish of approximate size 160x160x90mm embedded in wallcomplete all as specified & as directed. |
| 108 | S&F Cast iron nahani trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed. |
| 109 | S&F Cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed. |
| 110 | S & F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 111 | S & F in repairs, 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 112 | S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed |
| 113 | S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed |
| 114 | S&F PVC ( SWR) branch piece, single ( single -Y) equal or unequal 110mm dia with oval access door complete all as specified &directed. |
| 115 | S&F PVC ( SWR) branch piece, single ( single -Y) equal or unequal 75mm dia with oval access door complete all as specified &directed. |
| 116 | S & F 110mm bore PVC ( SWR)junction, single (Single T)equal or unequal with oval access doorcomplete all as specified and directed. |
| 117 | S & F 75mm bore PVC ( SWR)junction, single (Single T)equal or unequal with oval access doorcomplete all as specified and directed. |
| 118 | S & F110 mm bore PVC (SWR)couplers complete all as specified and directed. |
| 119 | S & F75 mm bore PVC (SWR)couplers complete all as specified and directed. |
| 120 | S&F in repair viterous china squatting panOrissa pattern size 580 x 440mm white with integral foot rest, but excludingflushing cistern but including\"P\" or \"S\" trap andprovision of lime concrete bedding complete all as specified and directed. |
| 121 | S&F in repairvitreous china wash basin white flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed. |
| 122 | S & Fin repairs, mild steel PVC coated coloured 20 mm dia draperyrodsfor curtains including decorative end holders and brackets (wall to wall or flush to wall) for securing curtain rod,complete all asspecified anddirected . |
| 123 | S&F in repairPVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed. |
| 124 | S & F in repairsink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 405 mm x 355 mm x 178 mm complete all as specified and as directed. |
| 125 | S&Fin repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed |
| 126 | S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed. |
| 127 | S & F in repairs, 15mm dia low density poly etheylene pipes (LDPE) of pressure rating 6 kgf/sqcm fixed complete to wall, ceiling or floors etc. complete all as specified and as directed. |
| 128 | S & F in repairs, chromium plated waste coupling 32mm (half or full thread) complete all as specified and as directed. |
| 129 | S&F urinal spreader of PTMT any colour for fixing to 15mm dia pipe ( minimum weight 60 gms) complete all as specified and directed. |
| 130 | S&F in repairPVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 131 | Taking down ceiling/exhaust/wall fan including connection wires carefully, removing to store in safe custody,painting with synthetic enamel paint by spraying incl. filling cavity and refixing the same in original position after repairing (rewinding if require) including changing the hook ,clamp ,pipe for ceiling fan as per requirement of site complete all as directed |
| 132 | Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custodysite or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge. |
| 133 | M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathedFRLS cable, 1100 volts grade IS-694marked, with multistranded copper conductors and earthcontinuity wire with 1.5 Sqmm cable (including connecting to earth dolly)laid/fixed in and including concealed in PVC rigid conduit on walls/ceiling, and also including sunk type pressed steel terminal box made out of galvanised iron sheet thickness not less than 1mm and 3 mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed. |
| 134 | All as per item serial No 153 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches |
| 135 | All as per item serial No153 here-in-before but One socket outlet 3 pin 5 Amp on independent board. |
| 136 | All as per item serial No 153 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. |
| 137 | S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed. |
| 138 | S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed. |
| 139 | S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed. |
| 140 | S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 16 Amp flush type complete all as directed. |
| 141 | S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed. |
| 142 | S&F lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed |
| 143 | S&F stepped type electronic fan regulator, two module size, flush type complete all as directed. |
| 144 | S&FEnvironmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed.Make:- HavellsModel HEXAFT10WLED857SSYMBOPC or equivalentModel of make : Philips /Crompton /GE. |
| 145 | S&F in repair Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed.Make:- HavellsModel HEXAFT10WLED857SSYMBOPC or equivalentModel of make : Philips /Crompton /GE. |
| 146 | S&F in repairLED light fitting of approved make1X 20 W, 220V, AC decorative batten type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 147 | S&FLED light fitting of approved make1X 20 W, 220V, AC decorative batten type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 148 | S&F in replacement LEDbuilding security light fittings of approved make 35 W 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistantincluding thermal management in multiple optics complete wit IP 65/66 protectioncomplete all as directed. |
| 149 | S&F LEDbuilding security light fittings of approved make 35 W 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistantincluding thermal management in multiple optics complete wit IP 65/66 protectioncomplete all as directed. |
| 150 | M&L in replacementbuilding secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 151 | M&Lbuilding secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 152 | S & F in replacement TPN DBs 4 Ways, double door, with provision of FP MCB as incomer and SP MCBs as outgoingcomplete grouted in wall with PCC 1:2:4 type B-1 |
| 153 | S&F in replacementSPN DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider |
| 154 | S & FSPN DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider |
| 155 | S & Fin replacementSPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider |
| 156 | S & FSPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider |
| 157 | S&F MCBs, SP 6 to 32 Amps, 10 KA, \"C\" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.Make :-Legrand Model 4085 90 to 95 orequivalent model in Siemens / Schneider/L&T |
| 158 | S&F in replacement MCBs, SP 6 to 32 Amps, 10 KA, \"C\" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.Make :-Legrand Model 4085 90 to 95 orequivalent model in Siemens / Schneider/L&T |
| 159 | S&FMCBs, SPN32 Amps, 10 KA,\"C\" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.Make :- Legrand Model 4086 09 to 17 or equivalent model in Siemens / Schneider/L&T |
| 160 | S&Fin replacement MCBs, SPN32 Amps, 10 KA,\"C\" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.Make :- Legrand Model 4086 09 to 17 or equivalent model in Siemens / Schneider/L&T |
| 161 | S&F in repair MCB TPN 40 to 63 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified. (Make :- Legrand / Siemens/Schnider) |
| 162 | M&LSub main wiring with 2 runs of 4.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit all together shall be measured as one unit.) |
| 163 | Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 164 | Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc,including taking up/down old cable complete all as specified and as directed. |
| 165 | Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc,including taking up/down old cable complete all as specified and as directed. |
| 166 | S & F GI tubing 25mm bore, light grade with all fittingsfor protection of cable and fixing to the existing pole with flat iron clamp 25X3mmincluding nut, bolts etc complete all as specified and as directed. |
| 167 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 168 | M&L for sub class \"B\" old size bricks laid in trenches for cable protection laid flat width wise along the length of cable complete all as specified and directed. |
| 169 | S&F of Exhaust fans AC single phase 230/ 240 V ,50 Hz metallic heavy body of size 300 mm sweep, 900 RPMwith louver fixing with 4 no hold fastener nut and bolt with washer and connecting with flexiable PVC insulated multistranded copper conductor cable of size 1.5 sqmm including civil work opening on wall and making good surface complete all asspecified and directed. (Make-USHA, Model-300MM S.PH TURBO HDEF 900 RPM or equivalent model of make Havells/Bajaj /Crompton) |
| 170 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 . |
AI Tender Summary
Tender Timeline
Feb 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender