Military Engineer Services-MES has published Tender For Special Repair To Omq 4A And 4 B At Afs Begumpet And Provn Of Certain Miscellaneous Works In Building No. 11 Of Caw Under Ge (Af) Hakimpet. Submission Date for this Tender is 06-03-2023. Civil Work Tenders in Hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Feb-2023 | Amendment to BOQ | Other | 27-02-2023 |
| 2 | 27-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-03-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor/wall tiling including cement mortor bedding (but not backing) removing rubbish outside MD land complete all as specified and as directed by Engineer-in-charge. |
| 2 | Demolition ofplain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge and removed debris outside MD land. |
| 3 | Demolition of plain cement concrete of any description in any position as inpadding concrete, sunken slabs coping, benching, kerbs or mud stops etc., complete all as specified and as directed by Engineer-in-charge and removed debris outside MD land. |
| 4 | M & L for 75 mm thick Plain Cement concrete type C-1 1:3:6using 20mm graded crushed stone aggregates as in plinth protection, hard standing, sub base, floor finish including necessary formwork complete all as specified and directed. |
| 5 | M & L for 25 mm thick Plain Cement concrete type B-1,1:2:4(20mm graded aggregate) complete all as specified and directed. |
| 6 | M & L for Plain Cement concrete type B-1,1:2:4(20mm graded aggregate) 40mm thick complete all as specified and directed. |
| 7 | M&L for 15 mm thick screed bed or bedding layer in CM 1:4 as in base to floor finish complete all as specified and as directed. |
| 8 | M&L for Double charged Vitrified Ceramic tiles 10 mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 9 | -Ditto- all as per item here-in-before but as in vertical surface such as skirting etc. to match with the flooring complete all as specified and as directed. |
| 10 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed. |
| 11 | -Ditto- all as per item here-in-before but as in vertical surface such as skirting etc. to match with the flooring complete all as specified and as directed. |
| 12 | M&L for colourdnon skid ceramic tiles 300X300X7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed incoloured cement to match complete all as specified and as directed. |
| 13 | M&L Chequered cement concrete tiles 300cm x 300cm x 25mm thick, set with grey pigment and cement , jointed and pointed in neat cement slurry in floors laid over 15mm thick 1:6screed bed all as specified and directed |
| 14 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in shirting/dado all as specified. |
| 15 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250mm x 7mm or 450 X350X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc., and removed rubbish outside MD land complete all as specified and as directed. |
| 17 | M&L for 15 mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M&L for 10 mm thick plastering in CM 1:3 on fair faces of concrete surface as in ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 20 | M&L for preparing new plastered surface of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coat of distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 21 | M&L for preparing new plastered surface of ceiling and applying 2mm thick putty finish to obtain smooth finish in ceiling surface and applying two coats of distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 22 | M&L for preparing new plastered surface of wall surface and applying two coats of cement based paint a coat of alkali resistant primer complete all as specified and as directed. |
| 23 | M&L for complete removal of existing treatment of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed. |
| 24 | M&L for complete removal of existing treatment of ceilingl and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed. |
| 25 | M&L for complete removal of existing treatment and applying two coat of cement based paint over a coat of primer complete all as specified and as directed. |
| 26 | M&L for preparing old plastered surface of wall and applying two coats of white wash complete all as specified and as directed. |
| 27 | M&L for preparing old plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 28 | M&L for Flush/raised pointing in CM 1:4 to squared rubble masonry, coursed complete all as specified and as directed. |
| 29 | Demolition of RCC Concrete of any description and in any position not otherwise specifically provided for. |
| 30 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed. |
| 31 | M&L fot TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 32 | M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded all as per specified for steps |
| 33 | Demolition of brick work built in CM including All Quions, arches, pillars etc complete all as specified and as directed. |
| 34 | M & L brick work with sub class "B" bricks straight or curved on plan exc 6M mean radius built in CM (1:6) as in manhole complete all as specified and as directed. |
| 35 | Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth complete all as specified and as directed. |
| 36 | S&F tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors 15 mm bore including taking down old unserviceable pipe complete all as specified and as directed. |
| 37 | S&F tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors 20 mm bore including taking down old unserviceable pipe complete all as specified and as directed. |
| 38 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 39 | S&F Gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and as directed. |
| 40 | S&F ISI marked 1000 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old unserviceable tanks all as specified and as directed |
| 41 | S&F in repairs Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 25 mm bore (Minimum weight 455 gms) complete all as specified and as directed. |
| 42 | Demolition and breaking up of AC/PVC drain pipes 100 mm dia set in CM complete all as specified and as directed. |
| 43 | Demolition and breaking up of AC/PVC drain pipes 75 mm dia set in CM complete all as specified and as directed. |
| 44 | S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 45 | S&F 150 X150 mm Salt-glazed stone ware gully traps, square, type "P" complete all as specified and as directed. |
| 46 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 47 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 48 | S&F 110 mm bore PVC (SWR) bends any radiuis all as specified and as directed |
| 49 | S&F 110 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed |
| 50 | S&F 75 mm bore PVC (SWR) bends any radiuis all as specified and as directed |
| 51 | S&F 75 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed |
| 52 | S&F 110 mm bore PVC (SWR) junction single, (single T) all as specified and as directed |
| 53 | S&F 110 mm bore PVC (SWR) junction single, (single T) with access door all as specified and as directed |
| 54 | S&F 75 mm bore PVC (SWR) junction single, (single T) all as specified and as directed |
| 55 | S&F 75 mm bore PVC (SWR) junction single, (single T) with access door all as specified and as directed |
| 56 | M&L for cutting holes in stone masnory built in cement mortor and making good in CM 1:3 or in cement concrete 1:2:4 tupe B1 as required superficial area exc 150 sq cm but n.exc 400 sq cm complete all as specified and as directed. |
| 57 | S&F in repairs vitreous china wash down water closet pedestral pan white/ coloured, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 58 | S&F in repairs vitreous china squatingpan orrissa pattern size 580 x 440 mm white with integral foot rest, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 59 | S&F in repairs vitreous china wash basins, white, flat back, size 550X400 mm including brackets, waste fittings, brass, chromium plated 32 mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, pillar tap, casr copper alloy, chromium plated fancy type screwed type high pressure, with long screwed shanks and fly-nuts, PVC waste pipe of 32 mm bore 75 cm long, complete all as specified and as directed |
| 60 | S&F stainless Steel sink with drainage board made of 304 grade stainless steel 1 mm thick kichen with plugs washers and wastes, including fixing cantilever brackets and connecting union to pipe over all size 915 mm X 460 mm with bowl size 410 mm X 330mm X 160mm including PVC waste pipe of 38 mm bore and 75 cm long complete all as specified and as directed |
| 61 | S & F stainless steel plate rack of size 900 x 1200mm rectangular, 1mm thick including provision of wooden gutties. Make :- Deep/Anjali |
| 62 | S & F for Chromium plated wall mixer 3-in-1 system with provision of for both hand shower & over head shower complete with 115mm long bend pipe on upper side, connecting legs & flanges (without hand and overhead shower) Make :-Jaquar Code No CQT-23273UPR or equivalent approved make |
| 63 | S& F CP Angular stop cock 15mm Make: Jaguar Cat No :CQT-CHR-23053 |
| 64 | S & FSS toilet paper holder with flap. Make: JAGUOR code no.ACN-CHR-1153S |
| 65 | S & F Chromium plated two way bib cock with flanges. Make : Jaguar Cat No DRC-CHR-37041 |
| 66 | M&L for chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 67 | S & F Single Stainless steel towel rail 600mm long Make : Jaguar Cat No CAN-CHR-1111NM |
| 68 | S & F Soap dish holder Make : Jaguar cat No AKP-CHR-35731 |
| 69 | S&F chromium plated heavy duty coat hook having 2 nos of hooks make jaquor 35761 fixed the existing door with necessary screws etc complete all as specified and as directed by Engineer-in-charge |
| 70 | M&L 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Make: Gumaxy or equivalent as approved by GE |
| 71 | S & F health faucet with flexible pipe and hand shover ,the length of hose 1mt fitted to the tap. Make :JAGUOR Code ALD CHR 565 |
| 72 | S&F cornner glass shelf of size 9"*9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws Make: Jaquor ACR 1173 |
| 73 | S & F single flow over head shower 100mm diachromium platedfancy type bottom with rubber holes all as specified and directed fixed in repairs. Make-Jaquor code OHS-CHR-1989 |
| 74 | S&F in repairs PVC wall cabinet 320mm X 350mmX 270 mm with single door fixed to wall. Cat no: SSMPL-04 of SEAGULL or equivalent as approved by GE. |
| 75 | S&F in repairs glass shelf 600 mm long fixed to wall Cat no: 7771 of JAGUAR or equivalent as approved by GE |
| 76 | M&L for preparation of old plastered surfaces of walls and applying one coat of cement based paint complete all as specified and as directed. |
| 77 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint all as specified and as directed |
| 78 | M&L for applying three coats of white washincluding preparation of surfaces on ceiling complete all as specified and as directed |
| 79 | M&L for applying three coats of white washincluding preparation of surfaces on wall complete all as specified and as directed |
| 80 | Overhauling of sliding steel door/rolling shutternot exceeding 12 sqm gear/hand completely including loosening/ tighening any type of hinges and gresing/oilingthe top and bottom complete all as specified and directed. |
| 81 | M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in terrace including water proofing compound finished even surface complete all as specified and directed. Note: WPC shall be measured seperately. |
| 82 | M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 83 | M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately) complete all as specified and as directed. |
| 84 | M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg/sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and directed. |
| 85 | Supply only integral water proofing compound as per manufactures instruction. |
| 86 | M & L for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed |
| 87 | M & L for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and approved |
| 88 | S&F 3mm thick sheet glass ordinary quality frosted fixing with putty in squre n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 89 | S&F 1st class hard wood beads, straight (any size) for glazed or guaged joinery, renewed, including mitres etc. and removing old beads complete all as specified and directed. |
| 90 | S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stain less steel wire staples complete all as specified and directed. |
| 91 | Taking down chowkats with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but not exc. 4 Sqmeach complete all as specified and directed. |
| 92 | Taking down shutters of any description exc 1 sqmand n.exc 2 sqm each complete all as specified and directed. |
| 93 | S & F for Pressed steel frames (size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed. |
| 94 | S & F for Pressed steel frames (size 105x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed. |
| 95 | M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixedcomplete all as specified and directed. |
| 96 | M&L for PCC 1:3:6 type B1 (using 20 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound (but excluding the cost of WPC) as per manufacturers instrucions all as specified. |
| 97 | S&F 35 mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and directed. |
| 98 | S & F for 35mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed. |
| 99 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples complete all as specified and directed. |
| 100 | Taking down chowkats with shutter ( without taking off shutters from the frame) n.exc 1.5 Sqm each incl steel windows and ventilators complete all as specified and directed.. |
| 101 | M&L preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 102 | M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.. |
| 103 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x52mm),sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 104 | Area not exceeding 2.00 sqm each |
| 105 | Area exceeding 2.00 sqm each |
| 106 | S&F Sheet glass, ordinary quality 4.8mm thick and glazing with rubber to UPVC frame in square/rectangleexc 0.5 sq. m in each pane complete all as specified and as directed |
| 107 | S&F Steel ventilators with top hung shutters including hinges, steel peg stay etc. complete all as specifed and as directed. |
| 108 | S&F MS hold fasts cut to length bent to shape as required drilling holes and fixing with MS screws etc., complete all as specified and as directed |
| 109 | S & F in repairsFramed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 110 | M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 111 | S & F in repairs Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 112 | S & F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottomrails .M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width struckinside with solvent cement for stilesand plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 113 | S&F 100 mm long MS butt hinges, medium weight cold rolled. |
| 114 | S & F Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised |
| 115 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section |
| 116 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section |
| 117 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section |
| 118 | S&F 150 mm longextruided aluminium alloy handles fabricated type anodised, |
| 119 | S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 120 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hartd drawn steel spring, fixed in floor complete all as specified and directed. |
| 121 | S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete |
| 122 | Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc. |
| 123 | S&F in repairs 1st class hard wood plain fillets rectangular exc. 3 and n.exc 6 sqcm wrought fixed with screws all as specified and as directed |
| 124 | M&L for 25mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work (Greenply or equivalent ) complete all as specified and as directed by Enginner-in-Charge. |
| 125 | M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work (Greenply or equivalent ) complete all as specified and as directed by Enginner-in-Charge. |
| 126 | S&F 100 mm Rim latch with two levers, of aluminium alloy body, with brass knob or lever handle and fixed |
| 127 | M&L antitermite treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 128 | M&L antitermite treatmentAt points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the samecomplete all as specified and directed. |
| 129 | S&F Anodised aluminium snap grid frame workof size 605 x 605mm for false ceiling Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longincluding 4mm thickNon asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws including M&L for preparing new surfaces of ceiling and applying two coats to distemper oil emulsion over a coat of chalk whitinig complete all as specified and as directed. |
| 130 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, including necessary form work |
| 131 | M&L for 15mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 132 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matc complete all as specified and directed. |
| 133 | All as per item no above here in before but on vertical surfaces |
| 134 | Excavation in post holesn exc 0.5 cum, getting out, returning, filling in layers n exc 25cm etc removal of surplus soil to a distance n. Exc 50mt and making good surface in hard/dense soil complete all as specified and directed |
| 135 | M&L Steel work in tubular trusses, stanchions including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified. |
| 136 | M& L for mild steel work as in caps,bases,angle brackets , cleats or other connecting plates with necessary fittings complete all as specified and as directed. |
| 137 | M&Lfor 11 to 15 mm dia of neck of Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long but n exc 10 cm longcomplete all as specified and directed.. |
| 138 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 139 | S&F 1mm dia 125mm MS sheet eaves gutter, galvanised class 3, half round with rounded edges |
| 140 | S&F stack clamps for 110mm dia PVC(SWR) pipes of 50mm x 5mm flat iron and 16mm dia round iron stay bolts and nuts and securing ends ofstays to wall and roofs fixed all as specified and directed |
| 141 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge. |
| 142 | Taking down unserviceable MCB DBs, Metal clad DBsalong with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge. |
| 143 | Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etc,. |
| 144 | Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn throughand including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specifiedand as directed for the following:- |
| 145 | Onelight pointcontrolled by one one way switch . |
| 146 | Onelight pointcontrolled by one two way switch . |
| 147 | One ceiling fan point controlled by one one wayswitch. |
| 148 | One Exhaust fan point controlled by one one wayswitch. |
| 149 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 150 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 151 | One bell/buzzer point controlled by one push button on the same board with other switches or independent. |
| 152 | All as per item No. here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge. |
| 153 | M&L for Modular switch 6A, 1 way.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 154 | M&L for Modular switch 6A, 2 way. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 155 | M&L for Modular switch 16A, 1 way. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 156 | M&L for Socket outlet 6A modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 157 | M&L for Socket outlet 16A modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 158 | M&L for switch bell push modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 159 | M&L for Stepped type fan regulator(4steps), 120 W-2 modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 160 | S&F Electric bell/ buzzer 230 volts, single pole, 240 V. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 161 | S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 162 | M&L for Lamp holderPVC/ Polycarbonate type with back plate suitable for batten fittings. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 163 | M&L for Modular Telephone socket. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 164 | M&L for Modular TV socket.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 165 | M&L for PVC rectangular block for mounting, switch, sockets, fan regulator etc. with 3 mm thic plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep all as specified and as directed. |
| 166 | Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable1100 volts grade with multi-stranded copper conductors, drawn throughand including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finishing to match with the sorroundings) and including provision of 1.5 sqmmPVC insulated FRLS copper cable as earth continuity conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheetfor fixing the switches / sockets/ regulators etc. all as specified and directed for :- |
| 167 | Onelight pointcontrolled by one way switch . |
| 168 | One ceiling fan point controlled by one wayswitch. |
| 169 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 170 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 171 | S&F Switch piano flush type 5/6 Amps single pole one way230 Volts. Make :Anchor/ Havells/ Legrand/ Crabtree Make :Anchor/ Havells/ Legrand/ Crabtree |
| 172 | S&F Socket Outlet 2 in 1, 3 pin 5 Ampsflush type 230 Volts. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 173 | S&FStepped type electronic fan regulator flush type on laminated sheet for1200 mm sweep fans complete all as specified and directed. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 174 | M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia for Tele & TV points. |
| 175 | S & F in repairs, wall mounted 10W LED 6K 600x24x35 (LXWXH) light fitting, 2"with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking downold one, all as specified and directed by Engineer - in - Charge. Make: Havells, Model LUMILINEBS10WLED865SPCWH or equivelent in Philips/CG. |
| 176 | S & F in repairs, wall mounted 22W LED 6K 1150x24x35 (LXWXH) light fitting, 4" ultra slim, with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking downold one, all as specified and directed by Engineer - in - Charge. Make: Havells, Model LUMILINEBS22WLED865SPCWH or equivelent in Philips/CG. |
| 177 | M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades andhanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and as directed. |
| 178 | Dismantle the unserviceable rubber bush with clamping set, supply and fixrubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed by the Engineer-in-charge. |
| 179 | Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections, dismantling the unit, Cleaning the Storage tank and painting with one coat of synthetic enamel paint and refixing in its original position including replacing the rusted nut bolts, u/s inlet / outlet water pipes, u/s indicator red & green, u/s geyser element upto 3.0 KW, Provision of Additional Glasswool and testing on completion complete all as Specified and as directed by the Engineer-in-charge. |
| 180 | Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 181 | All as per item above but with 2x4.0 Sqmm + 1x4 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 182 | All as per item above but with 2x1.5 Sqmm + 1x1.5 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 1.5 sqmm cable conductor, one run of 1.5 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 183 | All as per item above but with 4x10.0 Sqmm + 2x10.0 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Four runs of 10.0 sqmm cable conductor, two runs of 10.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 184 | M&L for making suitable hole in stone masonary wall including taking douwn andrefixing of Exhaust fan of 230 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified & as directed. |
| 185 | Supply and fix MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete including taking down unserviceable complete all as specified and as directed. Make-Havells/Legrand/Schneider |
| 186 | M & L for sheet metal enclosure for vertical distribution board when MCCB for in coming and MCBs for out going to be used VTPN 4 way , 415 volts double door complete including all as specified and as directed. Note :- MCCB and MCB will be measured and paid separately under relevant items. |
| 187 | S&F MCB distribution board double door type, SPN 8 way sheet steel powder painted with bus bar neutral link earth bar etc. Make-Havells/Legrand/Schneider |
| 188 | S&F MCB distribution board double door type, SPN 4 way sheet steel powder painted with bus bar neutral link earth bar etc. Make-Havells/Legrand/Schneider |
| 189 | Supply & fixed MCCB 3 pole, 415V, fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and as directed by the Engineer-in-charge. Make-Havells/Legrand/Schneider |
| 190 | Supply & fix, MCB SPN 40 Amps, 240 voltssuitable for fixing in MCB DB "C" series complete all as specified and as directed by The Engineer-in-charge. Make-Havells/Legrand/Schneider |
| 191 | Supply & fix MCB SP 5 to 32 Amps, 240 volts,suitable for fixing in MCB DB "C" series complete all as specified and as directed by The Engineer-in-charge. Make-Havells/Legrand/Schneider |
| 192 | Supply and fixingLED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make-Havells equivalent in Philips/CG |
| 193 | M&L for Earthing complete with galvanised cast iron steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level, connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth electrod with top edge of earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI Light grade 15mm dia from earth plate to main switch board/panel,watring pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated meterial all as required at site and specified in electrical plate No 3 of SSR part I 2009 complete all as specified and as directed. Note : GI pie for protection of earth wire and earth strip beyond 7.5 mtr or shall be measured and paid separately under relevant items. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
