|
| 1 | Supplying, Installation, Testing and Commissioning of 3 phase, 50HP/37.5KW, 415V, 50 HZ,1500 rpm Kirloskar Make Electric Motor , frame size KI 280S continuous rating (S1 duty) IP-55 enclosure, with class \"F\" insulation suitable for ambient temperature 50C (temperature rise limited to class \"B\") coupled with Kirloskar make DSM 80/36 ,2 stage pump with base frame, suitable coupling arrangement, Normax Foot valve 4\" dia having suction and delivery of 100 X 80mm having discharge of 30 Ltr/sec, Total Head - 80 Mtrs or its equivalent etc.,as required and directed by Engineer-in-Charge. |
| 2 | Supplying of following sizes of XLPE insulated Heavy duty armoured Aluminium conductor UG Cable of 1.1 KV grade conforming to IS: 7098 (Part-I) and IS No. 1554 (Part-I) 1988 as applicable Make: CCI/ Gloster/ Havells/ Polycab/ Finolexa) 95 Sq.mm x 3.5 Core |
| 3 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.a) 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.a) Above 95 sq. mm and upto 185 sq. mm |
| 5 | Supplying, Installation, Testing and Commissioning of Cubical LT non extendable type floor mounted panel board suitable for Electric pump operation having size 100 x 100 x40 cm with four legs having length 40cm for suitable embedded in PCC 1:3:6 dust proof, vermin proof with inner earth stud i/e painting with 01 coat of primer and 02 coats of synthetic paint to house the following accessories.a) Panel box with paintingb)4 pole MCCB, 125A breaking capacity of 50KA similar to Havells cat No- IHDA6VBF0125 - 01Noc)Star delta starter, 50 HP/37.5KW, 3 ph, 415V, 50Hz with overload relay range- 62 - 73 Asimilar to Havells cat no. IHHASDYC - 01 Nod) Meter Module - Digitali) Indicator lamps - 03 Nosii) Analogue ammeter (0-200A) - 01 Noiii) Analogue voltmeter (0-500V)- 01 Noiv) 4 position voltmeter selector switch- 01 Nov) 4 position Ammeter selector switch- 01 Noe) CT coil 200/5 - 03 Nosf) Cut out200 A similar to Havells cat no IHKKRN4200= 03 Nos, g) Inter connection with suitable gauge copper wire, crimping of lugs cable gland and PCC (1:3:6) |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.a) 3½ X 95 sq. mm (45mm) |
| 7 | Supplying of following sizes of XLPE insulated Heavy duty un-armoured Aluminium conductor UG Cable of 1.1 KV grade conforming to IS: 7098 (Part-I) and IS No. 1554 (Part-I) 1988 as applicable Make: CCI/ Gloster/ Havells/ Polycab/ Finolexa) 50 Sq.mm x 3 Core |
| 8 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.a)63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.a) Above 35 sq. mm and upto 95 sq. mm |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheatheda) 3 X 50 sq. mm (32mm) |
| 11 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required |
| 12 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 13 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
