|
| 1 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 2 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead |
| 3 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 4 | Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge. |
| 5 | Laying in trenches CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE, SOCKET & SPIGOT PIPES, CLASS - K7 WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete including transportation charges of pipe from Deptt store to work site as per direction of engineer-in-charge ( Earth work in trenches jointing of pipes specials and fitting to be meausred separately & pipe will be supplied by the Deptt) |
| 6 | 100mm.dia DI Pipe (K-7) |
| 7 | 150mm.dia DI Pipe (K-7) |
| 8 | Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conformingto IS:5382of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. |
| 9 | 100mm.dia Push-on-joints |
| 10 | 150mm.dia Push-on-joints |
| 11 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 12 | 100mm dia MJ Socketed Tail Piece - |
| 13 | 150mm dia MJ Socketed Tail Piece - |
| 14 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete |
| 15 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials) |
| 16 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 17 | 100mm dia M.S.Pipe (6.30mm thick) |
| 18 | 100mm dia M.S. Flange.(10mm thick) |
| 19 | 100mm dia x 45\" M.S. Bend |
| 20 | 150mm dia M.S.Pipe (6.30mm thick) |
| 21 | 150mm dia M.S. Flange.(12mm thick) |
| 22 | 150mm dia x 45\" M.S. Bend |
| 23 | 150mmx 150mmx 150mm dia MS Plain Tee |
| 24 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 25 | Supplying all labour and T&P for jointing following dia MS pipe up to8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete |
| 26 | Supplying all materials Labour& T & Pfor Fixing DI ResilientSeated Glandless Sluice Valvewith double flanged ends for water works purposes conforming to IS 14846 - 2000 for the followingnominal diameters as per specificationcomplete including cost of Sluice valve .(VAG/AVK/Tallis) make |
| 27 | 100mm dia D/F Sluice Valve (PN1.6) |
| 28 | 150mm dia D/F Sluice Valve (PN1.6) |
| 29 | Supplying all labour, T&P materials etc. and the construction of brick masonry sluice valve chamber of over all of following internal; earth work in excavation in all kinds of soil;laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punningforinside surfaces & out side plastering above GL & cement pointingbelow GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular loadas per the approved drawing if any and the direction of Engineer-in-charge. |
| 30 | 0.75 m x 0.75 m x 1.225 m ( deep) |
| 31 | Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T & P etc all complete as per specification and direction of Engineer-in-charge. |
| 32 | Supplying all materials Labour & T& Playing of80mm thickfactory made cement concrete interlocking paver blockof M 35 gradeand approved make varoety colour and size made by block making machineblock making machine with strongvibraatory compaction of approved size design and shape laid in required colourand pattern over and including50mm thick compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete including costconveyance, royalties and taxes of all materials and cost of all labour, etc. completeas directed by Engineer in charge. |
| 33 | Including Cost of Paver Tile - |
| 34 | Excluding Cost of Paver Tile - |
| 35 | Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 36 | Supplying all labour , T&P and removing surplus earth /debrise by mechanical means within 10 K.M radious etc all complete as per the direction of EIC. |
| 37 | Supplying all materials Labour& T & Pfor Fixing of Tamper proof Air Valvefor water works purposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Air valve . |
| 38 | Supplying all materials,labour and T&P and making flanged joints for C.I. /DI pipes and specials of the following diameter including testing of joints as per specificationand direction of Engineer-in-charge |
| 39 | For 100mm dia |
| 40 | For 150mm dia |
| 41 | Supplying all labour, materials and tools and plants for undertaking immediate repair and restoration of essential public utlitiessuch as existing water supply servicepipe lines of different diameter of various category , sewer lines of the house holds telephone/internet cables /OFC cablesand all other public under ground utiltiesetc having chances of damage during execution of the new pipe line net work covering all sub DMA 1, 2 &3cost inclusive of labour, materials for repair and restoration, transportation and removal of all unused materials from site all complete |
| 42 | Supplying all material, Labour, T & P & Providing & Fixing DI/SS/Cast Iron Saddle Piece conforming to IS:10299-1982 consisting of strips suitable rubber packing to be used between straps and pipes, bolts and nuts to Asbestos Cement pressure pipes/CI/DI of the following nominal diameter as per specification complete (excluding cost of CI saddle piece, suitable rubber packing, bolts and nuts)all complete as per the direction of engineer-in-charge. |
| 43 | 100mm dia Composite Saddle |
| 44 | Fixing ferrule conforming to IS specification of the following nominal bore including drilling thewater main (Cast Iron/ Ductile Iron pipesorpipes with the metal straps) as per Specification complete. |
| 45 | 15mm dia brass Ferruleincluding drilling water main |
| 46 | Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (PE -80, 10 kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection lea proof including cost of required length of MDPE pipe, both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adaptor/ Female threaded adaptor etc. completeas per site condition & direction of Engineer in charge. |
| 47 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor / Laying in trenches of uPVCpipes & fittingsconforming to IS specificationsof the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge |
| 48 | 25 mm dia uPVC pipe (Sch - 80)in Trenches/on Ground |
| 49 | Providing cement concrete(1:3:6) with 40mm size CBHGmetal includingcostofallmaterials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge. |
| 50 | Cement concrete (1:2:4) with 12mm size crusher brokenhard granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete. |
| 51 | Supply of ISI Marked Centrifugally Cast (Spun) Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes,including inspection, transportation, handling, loading, unloading, stacking, etc. all complete. (Cost of rubber gaskets shall be inclusive in the cost of pipes of different diameters.) |
| 52 | 100 mm dia D.I.K-7 pipe |
| 53 | 150 mm dia D.I.K-7 pipe |
