Military Engineer Services-MES has published Tender For Repair / Maintenance Of Dg Set And Associated Works At Harni, Harni Airifield And Repair / Maint Of Dg Set / Amf Panel And Its Connected Items At Makarpura At Af Stn Baroda. Submission Date for this Tender is 02-03-2023. Diesel Generators Tenders in baroda Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-03-2023 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches in any type of soil and not exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable and fixing poles, stays etc and getting out complete all as specified and directed |
| 2 | Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all as specified and directed. |
| 3 | Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed. |
| 4 | M&L for sand cushioning to PVC cable with using clean dry and natural river sand and gently punning down below/around cable complete all as specified and directed. Note : Punned thickness shall be measured for payment. |
| 5 | Supply and lay burnt brick sub class `B" old size in trenches abutting each other width equal to length of brick etc complete all as specified and directed. |
| 6 | Laying only burnt bricks (old size) retrieved from above items laid in trenches as cable protection complete all as specified and directed. |
| 7 | Labour onlyfor boring under road/drain by manual method for inserting the light grade pipe GI tubing up to 50 mm dia for cable protection complete all as specified and directed. |
| 8 | Supply, laying and fixing galvanised iron pipe light grade, laid under roads/ drain / along with the pole /fixing of airtermination rodwith flat iron clamps, bolts, nuts washers complete all as specified and directed of following size:- |
| 9 | Size of 40 mm bore dia. |
| 10 | Size of 50 mm bore dia. |
| 11 | Supply, laying, jointing, testing and commissioning of LT underground, XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, Heavy duty, electric power cable laid in trenches/ ducts/fixed on pole/ wall / laid under road / path / culvert / drains / culverts encased in GI pipe, electric cable with aluminium stranded conductor, including jointing and testing 1100 volts grade with necessary lugs and compression brass glands including taking down old cable complete all asspecified and directed for the following Note: Excavation, earthwork will be measured and paid separately under respective items of this schedule. |
| 12 | 25 Sq mm 4 Core |
| 13 | 35 sqmm 3.5 core |
| 14 | 50 sqmm 3.5 core |
| 15 | Repairs/ servicing to 320 KVA DG set (Make- Kirloskar) including radiator servicing, intercooler servicing, general maintenance work such asbelt, valve clearance, hose pipe set,bearing greasing connection of terminal ,replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as per recommended grade & quality, and testing for smooth running at rated speed all as per manufacturer’s specification complete all as specified and directed for the replacement of following parts:- |
| 16 | Element Fuel filter |
| 17 | Element lube Oil filter |
| 18 | Air filter Inner |
| 19 | Air filter Outer |
| 20 | Corrossion inhibitor |
| 21 | Main Supply fuel Pipe |
| 22 | Description all as per item No.10.00 here-in-before,but for 82.5 KVA DG Set-03 (for AF net -02 (Harni) and Nodal Point,Make- Kirloskar)and consisting replacement of following parts:- |
| 23 | Element Fuel filter |
| 24 | Element lube Oil filter |
| 25 | Description alll as per item No.10.00 here-in-before,but 82.5 KVA DG Set -02 Nos (for AF NET Makarpura- Sudhit)and consisting replacement of following parts:- |
| 26 | Element Fuel filter |
| 27 | Element lube Oil filter |
| 28 | Descripton all as per item No.10.00 here-in-beforebut 125 KVA DG Set -02 Nos (for 57 ASP & Tetra Make- Greaves) and consisting replacement of following parts:- |
| 29 | Element Fuel filter |
| 30 | Element lube Oil filter |
| 31 | Description all as per item No.10.00 here-in-beforebut 125 KVA DG Set -01 Nos (for 25 Sqn, Make Mahindra Power) and consisting replacement of following parts:- |
| 32 | Element Fuel filter |
| 33 | Element lube Oil filter |
| 34 | Description all as per item No.10.00 here-in-beforebut 100 KVA DG Set-01 (for Spyder Bldg Make- Greaves)and consisting replacement of following parts:- |
| 35 | Element Fuel filter |
| 36 | Element lube Oil filter |
| 37 | Air filter Inner |
| 38 | Air filter Outer |
| 39 | Description all as per item No.10.00 here-in-beforebut 50 KVA DG Set-01 (for Pump house Harni,Make- Kirloskar)and consisting replacement of following parts:- |
| 40 | Element Fuel filter |
| 41 | Element lube Oil filter |
| 42 | Air filter Inner |
| 43 | Air filter Outer |
| 44 | Description all as per item No.10.00 here-in-beforebut 50 KVA DG Set-01 (for Pump house Harni,Make- Mahindraand consisting replacement of following parts:- |
| 45 | Element Fuel filter |
| 46 | Element lube Oil filter |
| 47 | Air filter Inner |
| 48 | Air filter Outer |
| 49 | Description all as per item No.10.00 here-in-beforebut 30 KVA DG Set -02 Nos (for STP makarpura & AVONIC L2 point Make- Greaves)and consisting replacement of following parts:- |
| 50 | Element Fuel filter |
| 51 | Element lube Oil filter |
| 52 | Air filter Inner |
| 53 | Air filter Outer |
| 54 | Description all as per item No.10.00 here-in-beforebut 62.5 KVA DG Set-01 Nos (for Jagat Naka P/H New Ceo Complex, Make- Ashok Leyand Ashok leyand)and consisting replacement of following parts:- |
| 55 | Element Fuel filter |
| 56 | Element lube Oil filter |
| 57 | Air filter Inner/outer |
| 58 | Description all as per item No.10.00 here-in-beforebut 62.5 KVA DG Set-01 Nos (forNew Ceo Complex Make: Cumminsand consisting replacement of following parts:- |
| 59 | Element Fuel filter |
| 60 | Element lube Oil filter |
| 61 | Air filter Inner |
| 62 | Air filter Outer |
| 63 | Description all as per item No.10.00 here-in-beforebut 30 KVA DG Set-01(for perimeter security lights Make- Kirloskar)and consisting replacement of following parts:- |
| 64 | Element Fuel filter |
| 65 | Element lube Oil filter |
| 66 | Air filter |
| 67 | Description all as per item No.10.00 here-in-beforebut 25 KVA DG Set-03 Nos (for perimeter security lights harni, Iron project office & Tech bldgMake- Kirloskar)and consisting replacement of following parts:- |
| 68 | Element Fuel filter |
| 69 | Element lube Oil filter |
| 70 | Description all as per item No.10.00 here-in-beforebut 20 KVA DG Set-03 (for perimeter security lights at Makarpura - Kiroskar and consisting replacement of following parts:- |
| 71 | Element Fuel filter |
| 72 | Element lube Oil filter |
| 73 | Air filter |
| 74 | Description all as per item No.10.00 here-in-beforebut 15 KVA DG Set- 04 Nos installed behind (57 ASP, Post-3,5 & 8 at Harni) Make-Mahindaraand consisting replacement of following parts:- |
| 75 | Element Fuel filter |
| 76 | Element lube Oil filter |
| 77 | Description all as per item No.10.00 here-in-beforebut 10 KVA DG Set 03 installed at (25 sqn,10 sqn & Power House station medicare centrer Make-Mahindra & Mahindraand consisting replacement of following parts:- |
| 78 | Element Fuel filter |
| 79 | Element lube Oil filter |
| 80 | Note: for item no 10.00 to 25.00:- (i) The contractor should carry out servicing throughauthorised DG Service provider & not by any local mechanic (ii) The contractor should be responsibleto maintain the DG set in serviceable condition for entire contract period & additionalworn out spare parts like O Rings, gasket, screws, fuel pipe, fuel & oil pressure gauge, fan belt etc if foundunserviceable should be replaced by contractor without additional cost .(iii) Proper servicing certificate should be produced immediately after servicing(d) Proper register for running of DG set should be maintained (e) The authorised mechanic should visit once in two monthsfor preventive maintenance & any no of emergency breakdown. (f) Total number of serevice visit will be limited upto 5 Nos during the entire contract period including attending any emergency fault in DG Set |
| 81 | Labour only for attending the complaints of DG set with AMF Panel carried out by manufacture"s authorised mechanic from the servicing centre without any delay for rectifying the defects by carefully opening and check the DG set parts to find out defects if any at site and replace the defected parts from the DG Setfor smooth functioning complete all as specified and directed. (Replacement of parts shall be measured and paid seperately under schedule). Note: If contractor not attend the complaint within 4 hrs penalty will beapplied @ Rs. 550 per hours. |
| 82 | Fuel flexible pipe wire braded,1,1/4""to 3/8""PVC best quality. |
| 83 | Oil pressure gauge of existing make. |
| 84 | Water temperature gauge of existing make |
| 85 | Ignition switch of existing make |
| 86 | Indicating lamp |
| 87 | Battery terminal heavy duty of brass of existing make. |
| 88 | Fan belt set Make Fenner/ Dunlock or Equivalent make approved by GE. |
| 89 | Self starter 12 voltsMake:Lucas/ Tvs or Equivalent make approved by GE. |
| 90 | Self starter 24 volts Make:Lucas or Equivalent make approved by GE. |
| 91 | AVR for 320/200 KVA DG Set |
| 92 | AVR for 82.5 to 125 KVA DG Set |
| 93 | AVR for 60 KVA to 82.5 KVA DG Set |
| 94 | AVR for 50 KVA to 60 KVA DG Set |
| 95 | AVR for 30 KVA to 50 KVA DG Set |
| 96 | AVR for up to 30 KVA DG Set |
| 97 | Battery lead 1.5 metre long, heavy duty, multi stranded copper conductor, PVC insulated 16 Sqmm single core. |
| 98 | Dynamo 12 volts Make- Lucas or Equivalent make approved by GE. |
| 99 | Fuel injector pump for DG set cap 82.5 KVA to 320 KVA |
| 100 | Fuel injector pump or DG set cap 5 KVA to 60 KVA |
| 101 | Radiator for DG set cap 82.5 KVA to 320 KVA of existing make |
| 102 | Radiator for DG set cap 5 KVA to 60 KVA of existing make |
| 103 | Solenoid Valve |
| 104 | Vibration pad |
| 105 | M&L for cleaning and descaling of radiator assembly by using suitable chemical (MAC solution) and by blower fan and by injecting water in high pressure in water tubings so as to remove all dirts etc in the fins complete all as specified and directed for following capacity |
| 106 | 320 KVA |
| 107 | 200 KVA |
| 108 | 125 KVA |
| 109 | 82.5 KVA |
| 110 | 63 KVA |
| 111 | 50 KVA |
| 112 | 30 KVA |
| 113 | Opening, dismentaling and repair/servicing of Self starter 12/24 voltsreplacing burnt/ wornout spares, parts asembling after repair and testing complete allspecified and directed(spares shall be measured and paid separately) |
| 114 | Supply and fixing the following spares in self starter 12/24 voltas as per existing make and model complete all as specified and directed |
| 115 | Armature coil |
| 116 | Field coil |
| 117 | Carbon brush |
| 118 | Copper bush |
| 119 | Solenoid switch |
| 120 | M&L for replacement of selector switch suitable for voltmeter/ammeter complete all as specified and directed. Make : AE/ Conzerv / HPL or Equivalent make approved by GE. |
| 121 | Material and labour for Maintenance of AMF panel and cleaning of dust inside withblower, cleaning of moving part /contacts from CT cleaner, tightening of loose parts /electrical wires, cleaning of contactors, relays andjunction points, servicing/ adjustment of relay, complete testing of AMF relay with necessary settings and load management system complete with replacement of worn out unserviceable components /burnt wires thimbles /lugs complete tested For DG set up to 200 KVA complete all as specified and directed. Note :- Parts /components for replacement shall be measured and paid seperately. |
| 122 | S&F following spare parts in AMF panels complete all as specified and directed. |
| 123 | Supply failure timer of existing make. |
| 124 | Restoration timer of existing make. |
| 125 | Microprocessor based AMF Module incorporating of supply and restoring timer 3 impulse automatic engine start /stop/ logic & fails to start locknut Mains/generator voltage, frequency sensing. |
| 126 | Diod 25 Amp thread type |
| 127 | Auxillary contactor 3 phase suitable for AMF Panel |
| 128 | NC/No relay of existing make |
| 129 | Under voltage relay of existing make |
| 130 | Time Delay relay of existing make |
| 131 | CT"s coil 5/250 for 320 KVA DG Set |
| 132 | CT"s coil 5/250 for 200 KVA DG Set |
| 133 | CT"s coil 5/150 for 125 KVA DG Set |
| 134 | CT"s coil 5/50 for 82.5 KVA DG Set |
| 135 | CT"s coil 5/50 for up to 50 KVA DG Set |
| 136 | Contactor MCX 43 of 400 A, 415 Volt for 320 KVA DG Set |
| 137 | Contactor 4 pole 315 Amps for 200 KVA DG set |
| 138 | Contactor 4 pole 250 Amps for 125 KVA DG set |
| 139 | Contactor 4 pole 200 Amps for 82.5 KVA DG set |
| 140 | Contactor 4 pole 63 Amps for upto 63 KVA DG set |
| 141 | Battary charger in AMF Panel |
| 142 | Controller for 82.5 KVA TO 200 KVA |
| 143 | Controller for 05 KVA TO 62.5 KVA |
| 144 | Contactor coil for 200 KVA |
| 145 | Contactor coil for 125 KVA |
| 146 | Contactor coil for 50 KVA TO 82.5 KVA |
| 147 | Contactor coil for up to 30 KVA |
| 148 | HRC fuse for short circuit protection |
| 149 | M & L for removing existing old rusted paint on DG set of painted surface and applying with two coats of synthetic enamel spray paint to match with existing colour good finish of following capaity complete all as specified and directed. |
| 150 | 320 KVA |
| 151 | 200 KVA |
| 152 | 125 KVA/100 KVA |
| 153 | 82.5 KVA |
| 154 | 62.5 KVA |
| 155 | 50 KVA |
| 156 | Up to 30 KVA |
| 157 | Supply only coolant for Cummins DG sets Make- Fleet Guard. |
| 158 | Supply only engine Oil 15W40 Valvoline for all DG Sets |
| 159 | Supply distle water |
| 160 | Repair & Maintenance of existing canopy of eco friendly DG Set above cleaning of internal & external parts, tightening of loose parts, replacing of unserviceable door locks and keys, replacing of damaged or burned inside sponge insulations complete all as specified and directed. |
| 161 | M & L for rewinding of DG set alternator of capactity 60 to 82.5 KVA with existing size and gauge and adequate number of turns of super enamelled copper winding wire and bore conductor including varnishing insulating material drying baking heating and connection leads with thimble and making connection complete all as specified and directed. |
| 162 | M & L for rewinding of DG set alternator of capactity 100 to 320 KVA with existing size and gauge and adequate number of turns of super enamelled copper winding wire and bore conductor including varnishing insulating material drying baking heating and connection leads with thimble and making connection complete all as specified and directed. |
| 163 | M & L for rewinding of DG set alternator of capactity upto 50 KVA with existing size and gauge and adequate number of turns of super enamelled copper winding wire and bore conductor including varnishing insulating material drying baking heating and connection leads with thimble and making connection complete all as specified and directed. |
| 164 | Supply, install, testing & commissioning in repairs exide battery 12 V, 130 AH, complete all as specified and directed |
| 165 | Supply, install, testing & commissioning in repairs exide battery 12 V, 100 AH, complete all as specified and directed |
| 166 | Supply, install, testing & commissioning in repairs exide battery 12 V, 150 AH complete all as specified and directed |
| 167 | Supply, install, testing & commissioning in repairs exide battery 12 V, 180 AH complete all as specified and directed |
| 168 | Supply, install, testing & comissioning in repairs PLA relay 24 volt DC for DG set including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed |
| 169 | Supply, install, testing & comissioning in repairs PLA relay 110-220 volt AC for DG set including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed |
| 170 | Supply, install, testing & comissioning in repairs Battery charger 24 volt 10 Amp (Maxpower or equivelent) for DG set including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed |
| 171 | Supply, install, testing & comissioning in repairs SMPS Battery charger 12 volt 10 Amp (Maxpower or equivelent) for DG set including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed |
| 172 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6.3mm burried directly in ground level with top edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanised iron strip 32 x 6 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No.3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock,PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforce with welded steel wire babric (APM) weight not less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and directed |
| 173 | Supply, install, testing & commissioning in replacement of faulty TCcontactor LC1FDP1154AEM5 AC-1 of 200 A, 415 Volt rated capacity with coil voltage 220 V 50 Hz DIN switch TA1 DN 22 and connected relaysmake C&S or equivalent complete all as specified and directed |
| 174 | S&F in repair digital three phase Ampere meter 0-500 volts of size 96x96mm complete all as specified and directed. |
| 175 | S&F in repair digital AC three phase, 04 Wire Electronic KWH meter CT-2E LCD,240 volts, 50 Hz upto 15000 Imp/KWH, IEC 61036 complete all as specified and directed |
| 176 | Supply and Laying3 core flexible copper conductor cable of size 2.5 Sqmm dia complete all as specified and directed |
| 177 | Supply and fix Rigid Non metallic PVC Conduit of 40 mm dia exclusive of boxes but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock, nuts, saddles complete all as specified and directed |
| 178 | Supply and fix in repair off load change over switch of 160 Amp Capacity fixed in existing panel complete all as specifed and directed. |
| 179 | Supply and fix in repair off load change over switch of 200 Amp Capacity with sheet Steel enclosure all as specified and directed |
| 180 | Supply & install, testing & commissioning in repairs LT feeder panelbox compartmental type,Lockable fabrication with dimension 800(H) x 500(W) x 500(D) made by 3.15 mm thick sheet CRCA approved weather proof design framed on angle iron (40mmx40mmx6mm) double door front and rear openable both side opening shutters duly painted two coat with siemens gray color, cable entry with glands, foundation /grouting on & including PCC as per site requirement with the following complete all as specified and directed :- (a)Automatic transfer Switch 200- Amp - 1 Nos (b)MCB SPN DP 16 Amp,- 2 Nos(Outgoing) (c)Internal wiring 4 Sqmm copper wire (d) indicating Lamp LED type R,Y,B- 3 Nos (e) Voltmeter 0-500 Volt-01 Nos(f) Amperemeter 0-500 Amps-01 Nos Note: Rate of panel is included the wirring of panel to DG set and testing of panel for auto start of DG Set. |
| 181 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 250 Amps, 35 / 36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 182 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 200 Amps, 35 / 36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 183 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 160 Amps, 35 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 184 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 125 Amps, 35 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 185 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 125 Amps,25 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 186 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 100 Amps, 35 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 187 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 40 Amps, 25 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 188 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 100 Amps, 25 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed |
| 189 | Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and S&F new MCCB triple pole with neutral, 63 Amps, 25 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete all as specified and directed |
| 190 | M & L for cleaning of area around the DG set up to 20 mtr and cleaning of DG Set,plinth, AMF Panel complete all as specifed and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
