Tender For Sinking Of Deep Tube Well By Odex - 115 Method Drilling At Different Places Of Madarihat-Birpara Block Under Alipurduar District (2 Nos) (2Nd Call)
Tender Value
9.16 Lakhs
Estimated cost
Bid Submission
10 Feb 2023
0 days left
EMD
18330
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madarihat → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Sinking Of Deep Tube Well By Odex - 115 Method Drilling At Different Places Of Madarihat-Birpara Block Under Alipurduar District ( 2 Nos ) ( 2Nd Call )
BOQ
| Sl. No. | Item Description |
| 1 | Drilling borehole by Rig machine with Odex-115( Simultaneous Driving of Casing Pipe) method through any kind of soil, boulder, rock, etc. upto the required depth. a) GL to 25 mtr. |
| 2 | b) 25 mtr. to 50 mtr. |
| 3 | c) 50 mtr. to 75 mtr. |
| 4 | lowering & placing of Filter assembly of required length. |
| 5 | Extruction and partening off the casing pipe upto the required length |
| 6 | Moblization & Transportation of Rig machines and its accessories, pipes, othermaterials, etc. to the site. |
| 7 | Development of the tube well by Air Compressor & BHT/other suitable Pump and Yield Testing by BHT/other suitable pumpingmachinaries including mobilization of Dev. & YT unit to the site. |
| 8 | Average expenditure for drilling tools such as Hammer, Pilot Bit, Reamer, Guxle DeVICe, Guide Sleeve, etc. |
| 9 | Collection of water sample and testing the same at Laboratory |
| 10 | 125 mm. ID MSERW Fin Cut Pipe. |
| 11 | 100 mm. dJa MS suitable Filter. |
| 12 | Bit Tube ( 1 50 mtr. long) for Odex-115. |
| 13 | Casing Shoe for Odex-115. |
| 14 | Packer Assembly for Odex-115 |
| 15 | 13Tube wet Specials ( Clamp, Cap, Bail Plug, Lugs, Rings, etc.). |
| 16 | M.S. Electrode. |
| 17 | Supply of KSB make CORA 100- UMAI- 100 2C/30+ 1.50/22 2HP singlephase submersible pump motor set. |
| 18 | Supplying & fitting 2.5 Sq.m. 3 core PVC flat copper submersible calbe (make :- Finolexl Havels! Polycab/ Mescab ) |
| 19 | Supply & fixing 25 mm dia G.I. pipe ( TAT A) cor calbe protection. |
| 20 | Supply &fixing 25 mm dia elbow (ISI) for cable protection. |
| 21 | Supply & fixing 25 mm dia union (ISI) for cable protection. |
| 22 | Supply of Submersible pump controler single phase 2 HP 240 V, 50 HZ, CAT No. SS97723 panle MR - G2 ( L& T make) as per direction of EIC. |
| 23 | Lowering the submersible pump motor set 2HP with 50 mm dia GI column pipe50 ft. long & cable & refitting the plumbing line & electrical power line by own tools & takles as instruction of EIC |
| 24 | Supply & fIXing 40 mm dia GI Column pipe ( Make- TATA-M) 10 It. long both V side thread including Heavy type Socket. |
| 25 | Supply & fixing M.S. Tubewell cover for 100 mm dia housing Having proper holes for insertions of column assembly, cables as per directionm of E.l.C. |
| 26 | Supply & delivery of the following GI fittings in a set :- a) Supply & Delivery 40 mm dia G.I. pipe (TATA medium) |
| 27 | Supply & delivery 40 mm dia G.I. elbow Heavy Duty |
| 28 | Supply & delivery 40 mm G.I. Union Heavy Duty ( ISI. App.) |
| 29 | Supply 7 delivery 40 mm dia x 4\" long G.I. Nipple ( I.S.I app ) |
| 30 | Installation above panel in the pump house including supply of 2.5 Sq.mm.copper calbe , G.I. short piece, Elbow, Union 7 other fixing matenals requiredto compie e the job along with testing of the hole intallation as per entire satJsfacbon of the E.I. C. |
AI Tender Summary
Tender Timeline
Feb 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender