Tender For Extension Of Carrier Room Building At 132 Kv S/S Gholia Kalan, kalan-Punjab

Tender For Extension Of Carrier Room Building At 132 Kv S / S Gholia Kalan -Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres. 2 Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outsidethe building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres 3 Dismantling brick work tile, masonry or tile lining : In cement 4 Dismantling concrete: Reinforced cement concrete 5 Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels 6 Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. 7 Cement Concrete 1:8:16 with 40mm gauge stone aggregate. 8 Cement Concrete 1:6:12 withstone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type) 9 Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type) 10 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure . 11 Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded. 12 First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth . 13 First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level. 14 First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth 15 First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level 16 Extra for work done in additional storey up to 4m above the top of structural roof of lower storey 17 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. 18 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16 19 Bottom Khurra on ground 1.2mx0.6m consisting of brick on edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3 20 Cement concrete 1:2:4 gola 10cm x 10cmconcave quadrant along junction of roofs withparapet wall finished smooth, where speciallyspecified. 21 Providing & Fixing Ceiling Consisting of 600mmx600mmx12.5mm thick Gypsum Board G.I cradling hanged from the ceiling by means of G.I Hanger Complete as per drawings. 22 Providing and fixing 110 mm dia SWR UPVC rain water pipe (ring fitted Type A ) as per IS : 13592 including jointing during masonary complete as per specifications and to the entire satisfication of Engineer-in-charge.(if fixed on wall face clamp to be paid separatly as per respective item) 23 Providing and fixing 110 mm dia SWR UPVC bend for rain water pipe as per IS : 14735 including jointing as per specifications and to the entire satisfaction of Engineer-in-charge. 24 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 25 Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material 26 Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material 27 Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). 28 12.5 mm thick cement plaster 1:4 29 12.5 mm thick cement plaster 1:5 30 20 mm thick cement plaster 1:4 in two coat work 31 20mm thick cement plaster 1:5 in two coat work 32 10 mm th. Cement plaster 1:4 under ceiling 33 Applying priming coat with metal primer onnew steel or iron work including preparation ofsurface. 34 Painting two or more coats with anti corrosive bitumastic paint to give an even shade 35 Finishing walls with acrylic smooth exterior paint of required shade with 2-coats applied @ 1.67 ltr/10 sqmtr over & incluiding base coat of water proofing cement paint applied @ 2.20 Kg / 10 sqm 36 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 37 Preparation of plastered surface for oil bound distampered including sand papering the surface 38 Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings(Excluding sliding bolt) 39 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete: ISI designation no I (Size of) 40 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) : 41 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) : 42 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides. 43 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) 44 Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts andscrews etc. complete : 45 Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete. 46 Providing & Fixing Stair case railing made out of MS Square bars20x20m as vertical post 0.70mtr high 47 Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat 48 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½ deep for walls and CI 3 deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 49 Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts 50 Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts 51 Wiring light point 52 wiring 6 amp plug control 53 Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch 54 Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 55 PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade 56 PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade 57 Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 58 Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) On Surface 59 Supply and erection of Miniature Circuit Breaker MCBs for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 60 MCB Single Pole 0.5-4amp. (10kA, Curve- C) 61 Providing andfixing general purpose tube fitting of 20Watt of Havells make 62 Providing and fixing 18 dia exhaust fans in switch house building 63 Supplying and fixing concealed tube fittingof 2 x 2 with electronic chok & CFLtubes of wipro make ( Model WCP 17236 SG) of 2 X 36 W (TC-L) 64 Providing and fixing electric ceiling fans with regulator complete in all respects 1400 mm sweep confirmingto IS - 374 / 79 duly amended up to date. 65 P&F M.S Cable Racks made OF M.S Angle Iron for various size of 50x50x6 mm complete as per dwg 66 Providing and fixing MS Angle iron nosing made out of30x30x5 angle and flat 25x3 mm 600mm c/c wt 2.56 kg/mtr. complete in all respects 67 Supply & Placinfg in positions cheqquerred plate 5 mm thicki/c cutting & grinding of edges complete in all respects 68 Extra Carriage of materials & diff. of rates of material- Cement 69 Extra Carriage of materials & diff. of rates of material- Steel 70 Extra Carriage of materials & diff. of rates of material- Fine sand 71 Extra Carriage of materials & diff. of rates of material- Coarse Sand 72 Extra Carriage of materials & diff. of rates of material- Crushed bajri 13.2mm 73 Extra Carriage of materials & diff. of rates of material- Crushed bajri 11.2mm 74 Extra Carriage of materials & diff. of rates of material- Stone metal 40mm 75 Extra Carriage of materials & diff. of rates of material- Bricks 76 Extra Carriage of materials & diff. of rates of material- Tiles

Refer document

INR 10300.0 /-

INR 5.09 Lakhs /-

Name of Work: Extenson of Carrier Room Building at 132 KV S/S GHOLIA KALAN

Sl. No.	Item Description
1	Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.
2	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
3	Dismantling brick work tile, masonry or tile lining : In cement
4	Dismantling concrete: Reinforced cement concrete
5	Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
6	Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
7	Cement Concrete 1:8:16 with 40mm gauge stone aggregate.
8	Cement Concrete 1:6:12 withstone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
9	Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type)
10	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .
11	Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.
12	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth .
13	First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.
14	First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
15	First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level
16	Extra for work done in additional storey up to 4m above the top of structural roof of lower storey
17	Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.
18	Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16
19	Bottom Khurra on ground 1.2mx0.6m consisting of brick on edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3
20	Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
21	Providing & Fixing Ceiling Consisting of 600mmx600mmx12.5mm thick Gypsum Board G.I cradling hanged from the ceiling by means of G.I Hanger Complete as per drawings.
22	Providing and fixing 110 mm dia SWR UPVC rain water pipe (ring fitted Type A ) as per IS : 13592 including jointing during masonary complete as per specifications and to the entire satisfication of Engineer-in-charge.(if fixed on wall face clamp to be paid separatly as per respective item)
23	Providing and fixing 110 mm dia SWR UPVC bend for rain water pipe as per IS : 14735 including jointing as per specifications and to the entire satisfaction of Engineer-in-charge.
24	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
25	Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
26	Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
27	Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).
28	12.5 mm thick cement plaster 1:4
29	12.5 mm thick cement plaster 1:5
30	20 mm thick cement plaster 1:4 in two coat work
31	20mm thick cement plaster 1:5 in two coat work
32	10 mm th. Cement plaster 1:4 under ceiling
33	Applying priming coat with metal primer on new steel or iron work including preparation of surface.
34	Painting two or more coats with anti corrosive bitumastic paint to give an even shade
35	Finishing walls with acrylic smooth exterior paint of required shade with 2-coats applied @ 1.67 ltr/10 sqmtr over & incluiding base coat of water proofing cement paint applied @ 2.20 Kg / 10 sqm
36	Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
37	Preparation of plastered surface for oil bound distampered including sand papering the surface
38	Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings(Excluding sliding bolt)
39	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete: ISI designation no I (Size of)
40	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) :
41	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) :
42	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides.
43	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
44	Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts andscrews etc. complete :
45	Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete.
46	Providing & Fixing Stair case railing made out of MS Square bars20x20m as vertical post 0.70mtr high
47	Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat
48	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
49	Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts
50	Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts
51	Wiring light point
52	wiring 6 amp plug control
53	Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch
54	Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
55	PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade
56	PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade
57	Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
58	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) On Surface
59	Supply and erection of Miniature Circuit Breaker MCB"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
60	MCB Single Pole 0.5-4amp. (10kA, Curve- C)
61	Providing andfixing general purpose tube fitting of 20Watt of Havells make
62	Providing and fixing 18" dia exhaust fans in switch house building
63	Supplying and fixing concealed tube fittingof 2 "x 2" with electronic chok & CFLtubes of wipro make ( Model WCP 17236 SG) of 2 X 36 W (TC-L)
64	Providing and fixing electric ceiling fans with regulator complete in all respects 1400 mm sweep confirmingto IS - 374 / 79 duly amended up to date.
65	P&F M.S Cable Racks made OF M.S Angle Iron for various size of 50x50x6 mm complete as per dwg
66	Providing and fixing MS Angle iron nosing made out of30x30x5 angle and flat 25x3 mm 600mm c/c wt 2.56 kg/mtr. complete in all respects
67	Supply & Placinfg in positions cheqquerred plate 5 mm thicki/c cutting & grinding of edges complete in all respects
68	Extra Carriage of materials & diff. of rates of material- Cement
69	Extra Carriage of materials & diff. of rates of material- Steel
70	Extra Carriage of materials & diff. of rates of material- Fine sand
71	Extra Carriage of materials & diff. of rates of material- Coarse Sand
72	Extra Carriage of materials & diff. of rates of material- Crushed bajri 13.2mm
73	Extra Carriage of materials & diff. of rates of material- Crushed bajri 11.2mm
74	Extra Carriage of materials & diff. of rates of material- Stone metal 40mm
75	Extra Carriage of materials & diff. of rates of material- Bricks
76	Extra Carriage of materials & diff. of rates of material- Tiles