}

Tender For Supply Installation Of Sub, habra-West Bengal

Urban Local Bodies has published Tender For Supply Installation Of Sub. Submission Date for this Tender is 18-02-2023. Submersible Pump Tenders in habra West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

36062682
Tender For Supply Installation Of Sub
Open Tender
Indian
West Bengal
habra
18-02-2023

Tender Details

Supply Installation Of Submersible Pumping Machinery At Ward No-24

Key Value

Document Fees
Refer document
EMD
INR 11759.0 /-
Tender Value
INR 5.87 Lakhs /-

BOQ Items

Name of Work: Estimate for supply & installation of Submersible Pumping Machinery along with ailled Electrical & Mechanical Works & supply & Installation of Liquid Metering pump for chlorination at banipur badarhat road water tank within ward no. 24 under habra municipality.
Sl. No. Item Description
1Supply & delivery at site the following pumping machine Electrical accessories etc. Submersible pumping machinery dirctly coupled with water proof suitable size motor having following Specification., PUMP, DISCHARGE(1175-LPM/15500GPH/70M3/HR), HEAD (36mtr./118fts.), SHAFTM.S./S.S, IMPELLER G.M./Bronze/S.S, OUTLET SIZE 75mm/100mm, PUMP EFFIENCY, INTERCENTAGE Minimum 65%, MOTOR, submersible type h.,50Hz,A.C.415V. +- 10% VOL. Range 415 V to wet type winding-RMP-2900.Make:KSB/PLUGA/B.G./FLOWELL/TEXMO/WPIL, N.B.(A) H/Q charaterristic curve chart of pump set should be submitted before delivary.(B)Test certificate of pump & motor Should be submitted during delivary.
24 sq.mm. 3 core water proof flat Submersible cable suitable for above pimp set(Make: INOLWXINETCO/CALAMA)
3100AMP. TPN 415 V main switch with rewireable type fuse link in sheet steel enclosure.(DIX)Model (Make: HAVELLS/GEC/STANDARD)
4L.T. panel bord of industrial type 14 SWG mode of 45 sheet metal(min 2mm. Thk)having 4nos. A.i. busber of 100A capacity with regard to the requirement in suitable iron frame & painted with approved shade including fixing of the following accessories as per direction including interconnection complet.a)100m x 100m. Sq.type 0-500 voltmeter of AE make with selector switch (make keycee) 01 no., b)100m x 100m. Sq.type 0-100 A voltmeter of AE make with selector switch (make keycee) 01 no., c) Single phase preventor,current sensitive type (LT/Minilec/voltamp) 01no. d) Indoor type shunt,current secsitive type capacitor suitable for tropical use rating as specified by WBSEDCL in terms of HP & Speed motor, (Make - Epcos/Asian/GE/summy JMP). 01 no., Phase indiating lamp with holder (R/Y/B) 03 no
5Motor starter ML-2FASD with suitable relay range (Make-L & T)
635 SQ. MM. 1.1Kv GRADE 3.5 core AL. Ar. Conductor. P.V.C insulated state.(Make GLOSTER/NICCO/GYSTAL/MESCAB/HAVELLS)
7Supply & delivery at site pipes, valves specials gauges etc. as per following specification.a) 125mm Dia UPVC"C" class column pipe with both sidethread & one side socketedi)3.00mtrs. Long
8ii) 1.5 mtrs long
9iii) C.I. Adapter (top)
10iv) C.I Adapter (Bottom)
11b) Heavy type suitable dia M.S. suspention clamp made of 125 mm. X 10mm. M.S. flat with nuts,bolts,washer etc.
12c)125mm. Dia CIDF sluice valve 2 nos. CLDF Reflux valve 1 no. M.S. cross- 1 no. CIDF/M.S. Enlarger 1 no. CIDF short pieces 2 nos. of required length. Flanged tail piece -1no. CIDF Bend-1 no. sheet plug, M.S. nipple, Flange, Nuts, Bolts etc. as per I.S. specification & other required materials for the job i.e. for making complete construction of delevary & wash out line.(Make: IVI/UPADHYA/KIRLOSKAR) as per IS 780/84 for sluice valve & IS-5312/84 for NRV Test certificate of the meterials should be submitted at the delivery *N.B.M.S. specials should be minimum 7mm. Thickness
13d)150mm. Dia 0-7 kg/cm2 range wall mounted pressure gauge complete with steel & brass stop cocks (Make: FEBIG/H, GURU) i) Tubewell outside the pump house(the cost includes 15mm.dia G.I. pipes of aprox 30ft. Length & specials)
14e) Split type M .S. fabricate suitable size tubewell cover having thickness 6mm. For housing pipe with necessary fastening arrangement alongwith provision of column pipe air pipe cable entry gland etc.
15f)150mm. Dia wall mounted depth gauge with all suitable dia & length of steel air pipe with all fittings including supply of one good quality hand pump. i) Tubewell outside the pump house (This cost includes 15mm. Dia G.I. pipe approx x 30ft length & specials) (Make: FEBIG/H. GURU)
16g) Anti-snapping safety device for above pump by supplying suitable size havey type M.S. clamp(3 sets) & 1" dia. Nylone rope of required length (double) including supply of all necessary. Materials as required.
17Fitting fixing of above LT pannnel & main switch & strter in the wall by supplying of all necessary materials as per i.e. rules & direction.
18Drawing of above supplied power cable in the wall/floor by supplying of all necessary as i.e. Rules & direction.
19Finising the end of PVC cable by criming method including supplying of suitable size copper thimble, jointing materials & supplying & fixing suitable type compression gland for above size PVC cable including supply of brass gland. Rubber ring etc as per i.e. rule & direction.
20Making sutiable size pump foundation base with supplying cement, sand stone chips etc. in the proportion of(4:2:1) including plastering . Neat cement finish etc complet as per direction of E.I.C. i) Outside pump house, (Size 1 mtrs x 1 x 1.38 mtr.), The above base of tubewell is to be made with 250mm Thk brick wall on all sides with 200mm. Thk C.C. slab on top including plastering & neat cement finising.
21Installation of above supplies P/Machinery along with coloum pipes. Safety device, submersibel cabel supplied under sl.no. (b) etc. as per direction. This cost includes the cost of inter connection of submersible cable with starter through conduit pipes as required & also concealled manner in the floor including cutting & mending damages of floor as required as per direcion, a) Outside pump house (This cost includes arrangement of derrick and drawing of cable & supplying of libtriy tools & accessories)
22Fitting fixing of above valves specials etc. with existing rising main by supplying of all necessary materials as required to complite the work as per direction. This also includes the cost of penting of valves & specials with enamel paint over a coat of anticorrosive paint. The colour coat & brand will be decided by the Engineer- in-charge.
23Earthing arrangement in compliance with IE rules by GI pipe eletrodes (50mm dia x 3mtr. Long x2 sets) in ground & inter connection with 25 X 6mm GI strip with earth busber to electordes ramming of surface & testing compl. As per deriction including connection of electrical equipments (double) to earth busber to be done with suitable strip or wire of GI/ CU. up to the satisfaction of EIC.
24Making internal electrification of P/house by 2 x 1.5 mm P.V.C. AI wire through suitable size casing pipe for 4 nos light point( 1 no. bracket point, 1no. Tube light point,2 nos. Bulck head point) & 1 no.5A, 3 pin plug point with earthing attachement of 1xno. 16 SWG GI wire with supplying of tube light fitting buibs as per approved make & brand including supplying & fixing 15A. SPN main switch (Havells make) on wall all complete as per I.E. rules & direction.
25Testing the entire installation as per satisfaction of Engineer-in-charge.
26Operation maintenance of pumping machinery & Electrical installation as per department requirement including operation of chlorine machine in a staggered manner as per direction. (Engaging only 1 No. operator to the pump)
27Supplying & fitting fixing 70 watt sodium vapour fixture (Philips cat, SR x 066/70 (E) with 40mm. Dia x2.5 mtrs. Long G.I pipe bracket fixing on wall of the P/housewith 3 nos. M.S. clamp property grouting including making power connection with supply & drawing 3/20 cu Wire with controling sub switchand continuous earthing from nearest junction board all complite as per direction.
28supply & delivery at site of ingector dozer (press feed type) set for online chlorinating system with reqd. accessorise viz.-S.S. air release valve, suitable dia orifice plate & stainless steel sheel(3mm. Thk) S.S. delevery valve, G.M. gate valve & non-return valve, S.S. leg for various type of design of pump & PVC indicator set etc. making 6mm. polytheen tube suction/delivary tubing & capacity 16 gallons. Make: Esence Engineering conceren.
29Installation of the dozer in place with fixing of orifice plate in the pipe line & other accessories & testing the dozer with chlorinated solution as per direction, (N.B.- It including the work of periodic maintenance of the chlorination system & trouble shooting as & when reqd. for a period of 12 months from the date of installation
30Add G.S.T @18%
31Add Cess @ 1%
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail