|
| 1 | Excavation work by mechanical mean (Hydraulic Excavator) manual Means in foundation Trenches or drain ( not exceeding 1.5Mtr. width or 10Sqm on plan) including dressing of sites and ramming of bottoms lift up to 1.5 mt. including getting the excavated soild and disposal of surplus Excavated soil as directed with in lead of 50mt. |
| 2 | providing and laying in position cement concrete of specified grade excluding the cost of centering ,shuttring ;- all work up to plinth level with1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size ) |
| 3 | Filling available excavated earth in trenches, plinth, sides of foundations etc. In layers not exceeding 20 cm in depth consolidating each deposited layer by watering, ramming, lead up to 50m and lift upto 1.5mcomplete. |
| 4 | Stone soling under floor property hand packed and consolidation by hand ramming complete |
| 5 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :in cement mortar 1:6 (1:cement:6 sand) |
| 6 | Squared rubble masonary with hard stone of approved quality in cement mortar 1:6 (1 cement: 6 sand) |
| 7 | Centring and shuttring including shtrutting propping etc. And removal of form for .Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 8 | Suspened floors, roofs, landing balconies and access platform |
| 9 | Edges of slab:- under 20cm wide |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering. finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 12 | Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).2nd class Sal wood |
| 14 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors. windows and clerestory windows (Area of opening for panel inserts excluding portion inside (grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class Teak Wood |
| 15 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick Second class Teak wood |
| 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 17 | 15 mm thick Cement plaster 1:5 (cement :sand in respective ratio in rough sides of brick stones\concrete walls for plastering upto floor two level finished even and smooth including scaffolding . |
| 18 | 6 mm thick Ceiling plaster 1:3 (1cement: 3sand) upto floor two level finished even and smooth including scaffolding. |
| 19 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS 15622 (thickness to be specified [by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete300x16mm |
| 22 | 250X16mm |
| 23 | Providing and fixing aluminium tower bolts (Balfel type) amodized transparent or dyed to requred land colour with screws etc complate.200x10mm |
| 24 | 150X10 |
| 25 | Providing and fixing aluminium handel anodize amodized transparent or dyed to requred land colour with screws etc complate. 125mm |
| 26 | 100 mm |
| 27 | Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete. |
| 28 | Providing and fixing 100mm bright finished hard drawan hooks and eyes. 100mm |
| 29 | Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work hard & Soft |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 31 | Two or more coats on new wood Applying primary coat over new steel and other metal surfaces to give an even shade with ready mixed priming paint brushing red lead, Red oxide.. |
| 32 | Painting two coats (excluding primary coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade i/c cleaning of all dirt dust and other foreign matter and sand papering and stopping |
| 33 | Providing 40x3mm flat iron hold fast 40 cm long i/c fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30×10×15cm 1:3:6. |
| 34 | Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls. Priming coat with distemper primer. |
| 35 | Finishing wall with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84Kg/10 sqm) |
| 36 | Proving under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) wall rammed and consolidated and grouted with fine sand including preparetion of ground. |
| 37 | Making plinth protection 50mm thick with cement concrete 1:3:6 (1Cement: 3Sand : 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry \"brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing including finishing the top smooth. |
| 38 | Constructing Coursed rubble hammer dressed \"U\" Shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 cement: 6 sand) and inside plastering with cement mortar 1:3 (1 cement: 3 sand) including earth work and laying 10cm cement concrete 1:5:10 (1 cement: 5 sand : 10 graded stone aggregate 40mm nominal size) and 7.5 cm. cement concrete 1:2:4 (1 cement: 2 sand : 4 graded stone [aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design. |
| 39 | 15 mm thick Cement plaster 1:5 (cement :sand in respective ratio in rough sides of brick stones\concrete walls for plastering upto floor two level finished even and smooth including scaffolding . |
| 40 | Cement concrete flooring 1:2:4 ( 1 Cement: 2 Sand 4 graded stone aggregate) with 40mm thick with 20 mm nominal size stone aggregate |
| 41 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering. finishing and reinforcement with1:1 5:3 (1 cement: 1.5 coarse sand) : 3 graded stone aggregate (20 mm nominal size). |
| 42 | Boulder/brick pieces, gravel filling in soak pit |
