Military Engineer Services-MES has published Tender For Repair /Replacement Of Gi Tube, Pvc Tanks, Tiling Works, Plaster, Tank Cleaning And Sanitary Fittings In Bldg No. P-104 To P-119, P-121 To P-130, P-71 To P-84, P-31 To P-34, P-12 To P-22, P-58 To P-69, P-01, P-02, P-04 To P-10 And Certain. Submission Date for this Tender is 18-03-2023. PVC Tank Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Feb-2023 | Corrigendum No 1 | Date | 04-03-2023 |
| 2 | 25-Feb-2023 | Corrigendum No 2 | Date | 11-03-2023 |
| 3 | 03-Mar-2023 | Corrigendum No 3 | Other | 11-03-2023 |
| 4 | 11-Mar-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-03-2023 |
| 5 | 18-Mar-2023 | Date Extended 18Mar2023 | Admin Corrigendum Date Extend | 20-03-2023 |
| Sl. No. | Item Description |
| 1 | SCHEDULE "A" B/R Works |
| 2 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc., complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material and labour for plastering 15mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, and preparing the surfaces smooth by applying white cement based putty to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, and after preparing the surfaces applying two coats ofoil emulsion distemper (washable), as approved tint/colour by using paint roller brush complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labour for rendering/plastering 5mm thick in cement mortar (1:3) on any face of ceiling, finished fair and even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge |
| 7 | Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 8 | Material and labour for vitrified ceramic coloured tiles (dark shade, jointless) 8 to 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for vitrified ceramic coloured tiles (dark shade, jointless) 8 to 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for Glazed ceramic coloured tiles of size450mmX 350mm/ 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and labour for Non Skid ceramic coloured tiles7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and labour for Glazed ceramic coloured tiles of size 300mm X 200mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Taking up or down existing galvanised steel water/KITEC tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge. |
| 15 | Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittingslike elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge. |
| 16 | Supply & fixing in repair vitreous China squatting pan "Orissa" pattern white of size 580mmx440mm with integral foot rests (excluding flushing cistern, flush pipe above floor and trap), including demolation of tile, PCC, taking out old WC, taking out limeconcrete filling and after fixing new WC re filling lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including fixing PVC flush pipe upto finished floor level, joints of flush pipe and trap make leakproof and testing before filling concrete and including all other connected work as required upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engineer-in- charge. (NOTE : Tile work with screed shall be measured and paidseparately under appropriate item of this schedule. |
| 17 | Supply & fixingin repairs vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge. |
| 18 | Supply & fixing in replacement vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe including bracket and cutting for and pinning in end of bracket or erecting including fixing only pillar tap (new or serviceable old pillar tap as per site condition ) complete all as specified and as directed by Engineer-in-Charge. (Note :- Pillar tap if required in replacement, shall be measured & paid separately under appropriate item of BOQ.) |
| 19 | Supply and fixing in replacement 10 litres capacityPVCvalveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handleincluding brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply & fixing in repair bib tap cast copper alloy, chromium plated with crutch or butterfly handle with capstan head, wall flange, screwed down, screwed for iron pipe or for brass ferrule15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 21 | Supply & fixing in repair concealed stop cock cast copper alloy,chromium plated, fancy type, long shank and cup, screwed both ends suitable for15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock shall be as given in SSR or in relevant IS. |
| 22 | Supply & fixing in repair stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 23 | Supply & fixing in repair pillar tap cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered"Hot" or "Cold" with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :-The minimum weight of tap shall be as given in SSR or in relevant IS |
| 24 | Supply & fixing in repair grating doom 100mm dia PTMT (minimum weight 25 grms) complete, all as specified & directed by Engineer-in-charge. |
| 25 | Supply & fixing in repair cromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 26 | Supply & fixing in replacement stainless steel sink made out of 1.00mm thick sheet, kitchen or laboratory withplugs, washers, waste pipe includingbedding in cement mortar to dwarf wall or fixing with cast iron cantilever brackets and connecting union to waste pipe; overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & fixing in replacement stainless steel sink with drainageboard made out of 1.00mm thick sheet , kitchen or laboratory withplugs, washers, waste pipe includingbedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe; overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including taking down existing chinaware sink complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & fixing in repair CP waste fittings/coupling brass chromium plated for sink 40mm dia with long screws sinks and fly nuts, flange end bedded in red led cement and other in fixed, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & fixing in repair 40mm bore pipe Low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Supply & fixing in repair 32mm bore pipe Low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply & fixing in repair 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply & fixing in repair brass chromium plated tubular towel rail 20mm dia "D" type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & fixing in repair glass corner shelf with bracket chromium plated boundary fixed to wall with screws, complete with necessary fittings, complete all as specified and as directed by Engineer-in- charge. |
| 34 | Supply & fixing in repair CP grating, square/rounded, 100mm size of (minimum weight 100 gms), complete all as specified and as directed by Engineer-in- charge. |
| 35 | Supply & fixing in repair450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge. |
| 36 | Supply & fixing in repair600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge. |
| 37 | Supply & fixing in repairchromium plated brass WHB mixer fancy type swan neck long nose screwed down high pressure with or without lettered hot and cold and flynuts 15mm dia, complete all as specified & directed by Engineer-in-charge. |
| 38 | Supply & fixing in repair fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower with & including hand shower (health faucet) ABS body including 8mm dia flexible tube 1 metre long & wall hook, complete all as specified & directed by Engineer-in-charge. |
| 39 | Supply & fixing in repair jet spray with 1 metre PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet, complete all as specified & directed by Engineer-in-charge. |
| 40 | Supply & fixing in repair hand shower (health faucet) ABS body including 1.5 meter long 8mm dia flexible tube and including wall hook including taking down old any type shower complete all as specified and as directed by Engineer-in-charge. |
| 41 | Supply & fixing in repair chromium plated toilet paper holder, complete all as specified and as directed by Engineer-in-charge. |
| 42 | Supply & fixing in replacement 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, including dismantling/taking down old pipe complete all as specified and as directed by Engineer-in- charge. |
| 43 | Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, including dismantling/taking down old pipe complete all as specified and as directed by Engineer-in- charge. |
| 44 | Supply & fixing in repair PVC (SWR) bends (any radius) suitable for 75mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge. |
| 45 | Supply & fixing in repair PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge. |
| 46 | Supply & fixing in repair PVC (SWR) floor trap suitable for 75/110mm bore pipe, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 47 | Supply & fixing in repair 32mm dia brass chromium plated bottle traps for wash basins or sinks with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed by Engineer-in- charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 48 | Supply & fixing in repair chromium plated glass shelf of size 22", complete all as specified and as directed by Engineer-in- charge. |
| 49 | Supply & fixing in repair PVC bath cabinet made from hard thermosetting material with mirror, white/ivory colour, 400mm x 500mm size, complete all as specified and as directed by Engineer-in- charge. |
| 50 | Supply & fixing in repair chromium plated soap dish holder, complete all as specified and as directed by Engineer-in- charge. |
| 51 | Supply & fixingin replacement plastic water closet seatcover (black / white colour) closed pattern with flat bottom/recessed bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge. |
| 52 | Dismantling/taking down of existing unserviceable PVC water storage tanks capacity exceed 250 litre but not exceed 500 litre of any description, complete all as specified and as directed by Engineer-in-charge. |
| 53 | Dismantling/taking down of existing unserviceable PVC water storage tanks capacity exceed 500 litre but not exceed 1000 litre of any description, complete all as specified and as directed by Engineer-in-charge. |
| 54 | Supply & fixing rotational mouldedpolyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection, supply and fixing 20mm bore ball valve, complete all as specified and as directed by Engineer-in-charge. |
| 55 | Supply & fixing rotational mouldedpolyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection, supply and fixing 20mm bore ball valve, complete all as specified and as directed by Engineer-in-charge. |
| 56 | Supply and fixing in repair gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS. |
| 57 | Supply and fixing in repair HDPE water storage tank lid black (with arrangement for locking) for 500 litre capacity tank, complete all as specified and as directed by Engineer-in-charge. |
| 58 | Supply and fixing in repair HDPE water storage tank lid black (with arrangement for locking) for 1000 litre capacity tank, complete all as specified and as directed by Engineer-in-charge. |
| 59 | Disconnectinh existing, water tank exceed 250 litre but not exceed 500 litre, aside (or lowering if required) for repairs, cleaning etc., and hoisting, if required reconnecting and refixing in position (cleaning, repairing etc., measured separately and cleaning and removing all scale and dirt etc., from tanks and from mpouths of circulating pipe etc., complete all as specified and as directed by Engineer-in-Charge |
| 60 | Disconnectinh existing, water tank exceed 500 litre but not exceed 1000 litre, aside (or lowering if required) for repairs, cleaning etc., and hoisting, if required reconnecting and refixing in position (cleaning, repairing etc., measured separately and cleaning and removing all scale and dirt etc., from tanks and from mpouths of circulating pipe etc., complete all as specified and as directed by Engineer-in-Charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
