Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #36055933

Tender For Construction Of Various Civil Works And Pipe Laying Works Under Improvement And Augmentation Of Wss Birpur (Jjm) Work No. 03

Issued by Government Departments · birpur, Jammu And Kashmir
Tender Value
2 Crore
Estimated cost
Bid Submission
13 Feb 2023
0 days left
EMD
4 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
birpur → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Various Civil Works And Pipe Laying Works Under Improvement And Augmentation Of Wss Birpur (Jjm) Work No. 03 Please Refer Boq

BOQ

Work No. 03: Improvement and Augmentation of Water supply scheme BirpurunderJJM,Components: Construction of 03 No. Pump Room,02 No. 30000 Gns GSR/Sump Tank, 02 No. Boundary Wall and Pipe laying
Sl. No. Item Description
1Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed inall kinds of soils.
2Earth work inbulk excavation by Manualmeansover areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil
3Providing and laying in position cement concrete of 1:4:8 mix (1 cement 4 coarse sand 8 graded stone agg. 40 mm nominal size) excl. cost of centring and shuttering all work up to plinth level (using crushed stone agg.)
4Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (using crushed stone agg.)
5Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size)and curing complete
6Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workabilitywithout impairing strength and durability as per direction of Engineer-incharge..All works upto plinth levelNote: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix.
7Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V levelNote: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix.
8Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC.Note: - Minimum cement content considered is @ 340 kg/ cum. Any quantity less than 340 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix.
9Providing & Incorporating (during concreting) GP sheet strip water seal 1.25mm (nominal thick) at construction joints including jointing of ends so as to form a continous barrier, strip area (excluding laps) to be measured (width upto 20cm)
10Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)
11Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15°upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with M-20 graded concrete 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)
12Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto/above plinth level. Thermo -Mechanically Treated bars of grade Fe-500D or more
13Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
14Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
15Half brick masonry withcommon brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curingin cement mortar 1:4 (1 cement: 4 coarse sand)
16Extra for Half Brick work masonry in superstructure above plinth level upto floor V level
17Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete40mm thick with 20mm nominal size stone aggregate
18Centring and shuttering including strutting, propping etc and removal of form work for foundation,footings, base for columns etc.
19Extra for shuttering in circular work
20Centring and shuttering including strutting, propping etc and removal of form forwalls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.
21Extra for shuttering in circular work
22Centring and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
23Extra for shuttering in circular work
24Centering and shuttering including strutting, propping etc. and removal of form for:Arches, domes, vaults upto 6 m span
25Extra for arches, domes, vaults exceeding 6 m span.
26Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platforms.
27Edges of slabs and breaks in floors and walls Under 20 cm wide
28Steelworkweldedinbuiltupsections/framedwork,includingcutting, hoisting, fixing in position andapplying apriming coat of approvedsteel primer using structural steel etc. as required.Instringers,treads,landingsetc.ofstaircases,includinguseof chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
29Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding
3015mmthick Cementplaster ontheroughsideofsingleorhalfbrickwallof mix:1 : 4 ( 1 cement : 4 coarse sand)
3112mmthick Cementplaster ontheroughsideofsingleorhalfbrickwallof mix:1 : 4 ( 1 cement : 4 coarse sand)
3212mm Cement plaster finished with a floating coat of neat cement of mix: 1:3 ( 1 cement : 3 coarse sand)
33Extra for plastering on circular works
34Providing and mixing water proofing material ofapproved make in cement concrete work @ 1 kg per 50 kg of cement
35Providing and fixing on wall for unplastcised rigid PVC rain water pipes including jointing with seal ring 75mm dia.
36Fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. (medium) nominal bore for washout/ delivery main / over flow welded with M.S. Plate 1.25 mm thick 150 x150 mm size etc. complete excluding cost of pipe.
37Providing and fixing S.C.I. S & S 100 mm dia bend
38Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece as in manhole cover on top of the dome/spring cover with locking arrangement.
39Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm
40Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two ormore coats on new work
41Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
42Laying of DoubleFlanged ( Screwed/ welded) centrifugally cast (spun) Ductile Iron pipe of Class designation K - 9, conforming to IS : 8329 100 mm dia Ductile Iron Double Flanged
43Laying and fitting of G.I pipe ( all classes)completeexcluding the cost of pipes & earth work. G.I Pipe 100 mm dia
44Laying and fitting of G.I pipe ( all classes)completeexcluding the cost of pipes & earth work. G.I Pipe 80 mm dia
45Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes & earth work. G.I Pipe 15 mm dia
46Laying and fitting of HDPEpipesin trenchesincludingcost of fitting and overheadsexcluding the cost of pipe andearth workHDPE pipe 90 mm dia
47Laying and fitting of HDPEpipesin trenchesincludingcost of fitting and overheadsexcluding the cost of pipe andearth workHDPE pipe 75 mm dia
48Laying and fitting of HDPEpipesin trenchesincludingcost of fitting and overheadsexcluding the cost of pipe andearth workHDPE pipe 63 mm dia
49Fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. (medium) nominal bore for washout/ delivery main / over flow welded with M.S. Plate 1.25 mm thick 150 x150 mm size etc. complete excluding cost of pipe.
50Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm nominal bore
51Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm nominal bore
52Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm nominal bore
53Providing & fixing CI Double Flanged manually operated Sluice Valve/ Chak Valve(with cap wheels) as per specifications (IS:14846) for control purpose in proposed pipe of following dia including jointing material (bolts, nuts, gaskets, washers, rubber insertions etc.) complete including testing. 1.6 MPa(16 kg/cm2) 100 mm dia
54Providing and fixing 80mm dia C.I. sluice valves /Chak Valves as per specification (IS:14846) for control purpose in proposed pipe of following dia including jointing material (bolts, nuts, gaskets, washers, rubber insertious etc.) complete including testing 1.6 Mpa (16Kg/Cm2)
55Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etccomplete
56Making interconnection of Gi distribution branch with GIMainby providing and fixing tee, union incl. cutting and threading of pipe etc complete25mm to 40mm dia.
57Making interconnection of Gi distribution branch with GIMainby providing and fixing tee, union incl. cutting and threading of pipe etc complete50mm to 80mm dia.
58Providing & Fixing brass bib cock of approved quality 15 mm nominal bore
59Providing & fixingbrass ferrule with C.I . Mouth cover including boring & tapping the main 15 mm nominal bore
60Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
61Carriage ofstone aggregate (Crushed) upto 40-65 mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance ofAverage10 km
62Carriage ofstone aggregate (Crushed) upto 40-65 mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance ofAverage25 km
63Carriage ofSand and stone aggregate ( Crushed) upto 20 mmby Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance ofAverage 10 km
64Carriage ofSand and stone aggregate ( Crushed) upto 20 mmby Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance ofAverage 25 km
65Carriage ofcement & steelfrom nearest market (to be identified by Engineer in Charge) by Mechanical Transport to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 10 km
66Carriage ofcement & steelfrom nearest market (to be identified by Engineer in Charge) by Mechanical Transport to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 30 km
67Carriage ofBricks by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance ofAverage5 km
68Carriage ofBricks by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance ofAverage15 km
69Carriage ofG.Ipipes from District/ Divisionbal Storeby Mechanical Transport tosite of work /dumping place (to be identified by engineer in charge) including cost for loading and unloading for an av. distance of20 km and 200 mtr head load
70Carriage of HDPEpipes from District/ Divisionbal Storeby Mechanical Transport tosite of work /dumping place (to be identified by engineer in charge) including cost for loading and unloading for an av. distance of20 km and 200 mtr head load
71Providing & installation of Sign Board of size 8ft x 6ft with angle Iron frame of size 50 x 50 x 6 mm PBI sheet of 1.25mm thickness including painting and writing as directed by Engineer- In- charge. The Job also includes writing with black paint on the storage tank depicting capacity and other feature of the OHT
72Providing and fitting concealed internal Electrification of roomincluding 4 Nos LED lights,Fan points 2 No., Fuse box 1 No., 2 no 15 Amp sockets with switch,5 Amp 2 no. sockets with switch - of approved brandand 04 nos LED security lights 30 watts, Main switch with complete wiring, with MS bracket for pole mounting complete including service line up to a length of 10 meters.

AI Tender Summary

OUR REF NO 36055933
AUTHORITY Government Departments
TENDER VALUE 2 Crore
LAST DATE 13-02-2023
Authority
Authority Name Public Health Engineering Department
Work Description Construction Of Various Civil Works And Pipe Laying Works Under Improvement And Augmentation Of Wss Birpur (Jjm) Work No. 03 Please Refer Boq
Basic Detail
Tender No PHES/78 of 2022-23 dt. 03-02-2023
Bidding Type Tender
Location
City birpur
State Jammu And Kashmir
Key Dates
Publish Date 03 Feb 2023
Submission Date 13 Feb 2023
Open Date 14 Feb 2023
Finance
Tender Value 2 Crore
Tender Fee 500
EMD 4 Lakhs
Exemption Not Available
Document List
061d5a41-c708-4e73-909c-af4c0c657537.html
BOQ_545765.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 03, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 13, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 14, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

061d5a41-c708-4e73-909c-af4c0c657537.html

xls

BOQ_545765.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender