Military Engineer Services-MES has published Tender For Repair Servicing And Maint Of Dg Sets Amf Panels And Connected Items Under Ge (East) Mathura. Submission Date for this Tender is 02-03-2023. Diesel Generators Tenders in mathura Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-03-2023 |
| Sl. No. | Item Description |
| 1 | Repair, maintanance and servicing of DG sets of capacities ( 30 KVA to 250KVA) of any make & type including dismantling of top / head ofDG set in presence of Engineer-in-Charge for thorough inspection by Engineer-in-Charge and carrying out work as directed as under:- (i) Checking & adjustment of tappet clearance. (ii) Cleaningcylinder & piston head by removing the carbon deposits. (iii) Checking general condition of the Engine. (iv) Checking & adjustment of operating parameters. (v) Checking & adjustment of fuel timing. (vi) Checking & adjustment of fault warning system. (vii) Replacment of the damaged gaskets andre-assembling the same after repair, servicing/replacement of unserviceable/worn out nut bolts including testing of DG set on full load as per time complete all as specified and as directed. Notes :Servicing of DG set will be done by Authorised dealer of Kirloskar/Cummins i.e manufacturer of DG set only. |
| 2 | Dismantling of old unseviceable Fuelfilterswith "O" ring complete and supplying and fixing new Fuel filterselements set (both Primery & Secondary as per model) with "O" ring asdirected & as suitable for following capacities of DG Set(any type or Model): Make: Fleetguard / Cummins / Mico |
| 3 | DG Set 30 KVA / 40 KVA |
| 4 | DG Set 62.5 KVA / 63 KVA |
| 5 | DG Set 100 KVA |
| 6 | DG Set 140 KVA / 160 KVA / 180 KVA |
| 7 | DG Set 250 KVA |
| 8 | Dismantling of old unseviceable lubricant oil filters cartridge with "O" ringandincludingby pass lubricant oil filter cartridge with "O" ring (as per model) complete and supplying and fixing new oil filter cartridge element with "O" ringasdirected & as suitable for following capacities of DG Set (any type or Model) : Make: Fleetguard / Cummins / Mico |
| 9 | DG Set 30 KVA / 40 KVA |
| 10 | DG Set 62.5 KVA / 63 KVA |
| 11 | DG Set 100 KVA |
| 12 | DG Set 140 KVA / 160 KVA / 180 KVA |
| 13 | DG Set 250 KVA |
| 14 | Dismantling of old unseviceable Air Filters element with "O" ring complete and supplying and fixing new air filters (both outer & inner) complete element setwith "O" ring as directed & as suitable for following capacities of DG Set (any type or Model): Make:Cummins/Mico/Fleetguard |
| 15 | DG Set 30 KVA/40 KVA |
| 16 | DG Set 62.5 KVA/63 KVA |
| 17 | DG Set 100 KVA |
| 18 | DG Set 140 KVA / 160 KVA / 180 KVA |
| 19 | DG Set 250 KVA |
| 20 | Supply and replacement of fuel water separatorfilter complete with benjo bolt and washerfor followingcapacity ofDG Sets (any type or Model)complete all as specified and as directed : Make: Fleetguard / Cummins / Mico |
| 21 | DG Set 100 KVA |
| 22 | DG Set 140 KVA / 160 KVA / 180 KVA |
| 23 | DG Set 250 KVA |
| 24 | Dismantling/taking down of radiator assycomplete from its mounting from engine and cleaning complete tubewith suitable cleaning reagent to remove rust & scaling , plugging of any water leakage by brazing / welding work andre-installing in original position including replacement of rubber hose pipe complete with jupiter clamps for 30 to 250 KVA capacity ofDG Sets (any type or Model) complete all as directed. |
| 25 | Material and labour for draining out diesel fromfuel tank ofDG set 30 to 250 KVA capacity (any type or model) andstoring the same in clean barrels, cleaning of fuel tanks, checking for any leakages and repairing the same (if any) with suitable welding, refilling the fuel and testing to the entire satisfaction of Engr-in-charge including repairing/replacement of locking arrangement with Key of fuel tank complete all as directed. |
| 26 | M&L for cleaning of oil , grease, dust etc fromouter (acousticenclosures) and inner surface(Engine, Alternator, base frame channel and fuel tank) of complete DG set and preparation of old painted surfacesand applying two coats of super enamel paint (in side of acoustic enclosures) of colour as directed on Engine, Alternator, base frame channel and fuel tank (except acousticenclosures) with the help of air compressor including including writing the machine No. (SM /MES No) complete all as specified and as directed for following capacities of DG Sets :- |
| 27 | DG Set 30 KVA / 40 KVA / 62.5 KVA |
| 28 | DG Set 100 KVA / 140 KVA / 160 KVA / 180 KVA |
| 29 | DG Set 250 KVA |
| 30 | M&L for disconnecting unserviceable fuel injection Pump (FIP) and transporting to workshop for complete repairing, calibration/overhaulingincluding by replacement of Seal Spring, piston ring , fork liver, bush and minor worn out nuts-bolts, sockets etc for 62.50 KVA to 250 KVA capacity of DG Set (any type or Model) including rifixing and testing on full load complete all as specified and as directed. |
| 31 | Supply and fixing in replacement flexible coupling with alignment of DG Engine for 160 KVA to 250 KVA capacities ofDG set (Any Type or Model) & Alternator including testing on full load complete all as directed . |
| 32 | M&Lfor dismantling and taking down unserviceable fuel injector with nozzle and transporting to workshop for overhauling/servicing and calibration, including replacement of injector cup seal, nozzel and plungers etc for any capacity and model of DG set and testing of injector nozzle on test bench for fine mist spray and refixing complete all as specified and as directed. |
| 33 | M&L drainout of old used engine oilfrom DG set engine any capacity, and cleaning of oil sumpincluding replacement of worn out Nuts bolts and gasket and filling of new engine oil complete all as specified and as directed. Note: Engine oil shall be measured and paid separately. |
| 34 | Supplying and replacement / topping up Engine oil 15W40 grade in DG Set complete all as specified and as directed. Make : Volina/Castrol/Volvoline / BP / HP / Indian oil |
| 35 | Supplying and replacement / topping up coolant in radiater of DG sets complete all as specified and as directed. Make:- Castrol/Indian oil/HP/BP |
| 36 | Taking down turbo charger and replacement of complete turbo charge kit for 100 KVA to 250 KVA capacity of DG Set (any type or Model) with new and fixing to its original position complete all as specified and as directed. |
| 37 | Supply and replacement of Turbo charger including mounting gas kit complete for 160 KVA to 250 KVA DG set as per existing make & model complete all as specified and directed. |
| 38 | M&L for dismantling of Exhaust pipe of silencer, cleaning of silencer to remove carbon deposit inside barrel and refixing including replacement of worn out rubber gasket packing and nut,bolts complete all as specified and as directed. |
| 39 | Dismantlingunserviceable battery charging alternator 24V, DC of DG sets, transporting to workshop, complete repairing / overhauling by replacing unsv parts such as carbon brush, bush, nuts & bolts, solinoid switch, bearing, armature,burnt winding including installation, commissioning & testingtofunction for charging of battery complete all as directed. |
| 40 | Dismantling of defective battery chargingalternator from DG engine, supplying and fixing new alternator 24 Volt DC of same make/manufacturer inclding replacement of worn out nuts bolts mounting clamp etc complete all as specified and as directed. |
| 41 | Supply and fixing in replacement of fuel (diesel) pipeof1250 PSI complete with brass banjo bolt & washeretc complete for DG Set of any capacity and make as per site requirement, complete, all as specified and directed. |
| 42 | Supply and replacement of compact type panel mounted battery charger suitable for charging 02 Batteries 12 V each including necessary connection with suitable size of copper wire complete for functional to chargeing of battery & testing all as specified and as directed. |
| 43 | Supply and replacement of compact type panel mounted battery charger suitable for charging 01 Batteries 12 V each including necessary connection with suitable size of copper wire complete for functional to chargeing of battery & testing all as specified and as directed. |
| 44 | Dismantling of unserviceable oil pump of DG Set any capacity & type for servicing ,cleaning, calibration, testing including replacement of worn out bushes, seal, "O" Ring, Gears, testing and commissioning complete all as specified and as directed. |
| 45 | Dismantling of unserviceable water pump of 160 to 250 KVA DG andservicing ,cleaning, calibration, testing including replacement of worn out parts , testing and commissioning complete all as specified and as directed. |
| 46 | Dismantling of unserviceable self starter 24V DC andtransporting to workshop for complete repairing by replacing unserviceable parts / burnt windingsuch as carbon brush, bush, nuts & bolts, solenoid switch, bearing, drive penionand rewinding of armature & field coil , replacement of gear assembly and after repair inatallation, commissioning & testingcomplete all as specified & directed. |
| 47 | Dismantling of unserviceable self starter 12V DC andtransporting to workshop for complete repairing by replacing unserviceable parts/burnt winding carbon brush, bush, nuts & bolts, solenoid switch, bearing, drive penionand rewinding of armature & field coil , replacement of gear assembly and after repair inatallation, commissioning & testingcomplete all as specified & directed. |
| 48 | Dismantling unserviceable self starter and supply & fixing in replacement new self starter 24 Volt DC with solonied switch suitable for DG set (as per existing model) including connecting, testing & commissioning to make functional complete all as specified and as directed. |
| 49 | Supplying and replacement V-Belt off sizes for 30 to 250 KVA DG set complete all as per site requirement, complete all as specified and as directed. Make:-Dunlop /Fenner/Powertech |
| 50 | Supplying and replacement of Oil pressure gauge ISI mark and complete all as specified and as directed. |
| 51 | Supplying and replacement of oil temperature gauge ISI marked complete all as specified and as directed. |
| 52 | Supplying and replacement of Fuel gauge meter ISI marked operated on 24V DC / 12 V DC as per site requirement complete all as specified and as directed. |
| 53 | Supply & fix Door hinge for sound proof acoustic enclosureof DG set complet with suitable arrangement to fixing in door as existing complee all as specified and as directed. |
| 54 | Supply & fix Door locks with key and opening handle suitable for sound proof acoustic enclosureof DG set complete with suitable arrangement to fixing in door as existing complete all as specified and as directed. |
| 55 | Supply and fixing maintenance free Lead Acid Battery 12V, 180 AH with initialy charged complete and installed at site complete all as specified and as directed . Make : Exide (Brand : Exide Express)/Amron / Prestolite / Power Tech / Tata make. |
| 56 | Supply and fixing maintenance free Lead Acid Battery 12V, 150 AH with initialy charged complete and installed at site complete all as specified and as directed. Make : Exide (Brand : Exide Express)/Amron / Prestolite / Power Tech / Tata / Livfast |
| 57 | Supply and fixing in replacement copper battery lead 1.5 mtr length red colour suitable for 180 AH battery complete with copper terminals both end including connection complete all as specified and as directed. |
| 58 | Supply and fixing in replacement copper battery lead 1.5 mtr length black colour suitable for 180 AH battery complete with copper terminals both ends including connection complete all as specified and as directed |
| 59 | Supply and fixing in replacement copper battery terminal with Nut bolts suitablefor 180 AH battery complete andfixing at site complete all as specified and as directed. |
| 60 | Supply and filling / replacement of electrolyte for battery complete all as specified and as directed. |
| 61 | Dismantling the alternator of capacity62.5 KVAto 160 KVA (any make & Model) from DG set for cleaning, servicing, appying one coat of insulation varnish over stator and rotor winding and heating, replacement of spare parts like main bearing, main terminal boards re-assembling and re-installing in its original position and testing on completion to the satisfaction of Engineer-in-Charge complete all as specified and as directed. |
| 62 | Supplying and replacement of Automatic voltage regulator ISI marked as per existing make and model and suitable for 62.5 KVA to 160KVA rating alternator with all connection complete all as specified and as directed. |
| 63 | Supplying and replacement of Automatic voltage regulator ISI marked as per existing make and model and suitable for 180 KVA to 250 KVA rating alternator with all connection complete all as specified and as directed. |
| 64 | M&L for repairing AMF panel& connected electric function of engine of DG Set including setting of engine command controller display(any type or capacity of DG) , detecting the electric fault, removing the defective control wiringand spare parts to make AMF panel functionalto DG Set by replacement of defective spares complete all as specified and as directed. Note:- (i) Spare parts will be measured & paid seperately as supply only. (ii) Taking down & refixing shall be deemed to be included in unit rate. (iii)Replacement of burnt control wiring shall be deemed to be included in unit rate. (iv) Repairing of AMF Panel of DG set will be done by Authorised dealer only. |
| 65 | Supply only Timer with realy 230 volts, 50 Hz AC of rating (03-60 second) and as per existing type used in AMF all as directed. |
| 66 | Supply only Over voltage/Low voltage relays of rating (370-460V) and as per existing type all as directed. |
| 67 | Supply only Auxiliary contacts with 1NO+1NC (including LHS & RHS)suitable for MCX-34 power contactor all as directed. Make:- L&T/ABB/Schneider |
| 68 | Supply only Auxiliary contacts with 1NO+1NC (including with 02 Nos LHS & 02 No RHS) suitable for MCX-43 power contactor all as directed. Make:- L&T/ABB/Schneider |
| 69 | Supply only Contactor coil 230 Volts, 50 Hz AC suitable for 3poles power contactor ML-12 type all as directed. Make:- L&T/ABB/Schneider |
| 70 | Supply only Contactor coil 230 Volts, 50 Hz AC suitable for 4 poles power contactor MCX-43 type all as directed. Make: L&T/ABB/Schneider |
| 71 | Supply only Contactor coil 230 Volts, 50 Hz AC suitable for 4 poles power contactor MCX-34 type all as directed. Make:- L&T/ABB/Schneider |
| 72 | Supply only power contactor 3 pole, ML-12 type 415 volts with 2NO+2NC auxiliary contacts and coilwith voltage 230 volts, 50 HZ AC all as directed. Make:- L&T/ABB/Schneider |
| 73 | Supply only power contactor 4 pole, MCX-43 type 415 volts with 2NO+2NC auxiliary contacts and coil with voltage 230 volts, 50 HZ AC all as directed. Make:- L&T/ABB/Schneider |
| 74 | Supply only power contactor 4 pole, MCX-34 type 415 volts with 2NO+2NC auxiliary contacts and coil with voltage 230 volts, 50 HZ AC all as directed. Make:- L&T/ABB/Schneider |
| 75 | Supply only power contactor 4 pole, MCX-32 type 415 volts with 2NO+2NC auxiliary contacts and coil with voltage 230 volts, 50 HZ AC all as directed. Make:- L&T/ABB/Schneider |
| 76 | Supply only power contactor 3 pole, MNX-400 type 415 volts with 2NO+2NC auxiliary contacts and coil with voltage 230 volts, 50 HZ AC all as directed. Make:- L&T/ABB/Schneider |
| 77 | Supply only power contactor 3 pole, MNX 80 type 415 Volt with 3NO+1NC ( MNX-A1 )add on block auxiliary contacts and coil with voltage 230 volts, 50 HZ AC complete set. Make:- L&T/ABB/Schneider |
| 78 | Supply only power contactor 3 pole, MNX-225 type 415 volts with 2NO+2NC auxiliary contacts and coil with voltage 230 volts, 50 HZ AC all as directed. Make:- L&T/ABB/Schneider |
| 79 | Supply only automatic engine controller microprocessor based DGC-6D type for automatic DG start and supervisory control device of same make and model existing DG set flush mounted enclosure includingPCC board kit unit with connection to make functional to AMF paneland complete wiring connection with testing complete all as dirceted. |
| 80 | Supply only automatic Generator engine controller microprocessor baseddisplay unit for automatic DG start of same make and model existing in DG set and supervisory control device includingPCC board kit unit with connection to make functional to AMF paneland complete wiring connection with testing complete all as dirceted. |
| 81 | Supply and fixing in replacement power command controller HMI211 display panel kit Model 0541-1394 including PCC board kit unit with connection to make functional to AMF panel and testing complete all as directed. |
| 82 | Supplying and fixing of CT coil off ratiosfor as per site requirement complete all as directed. Make: Neptune/AE/L&T |
| 83 | Supplying and replacement of Digital meter square type suitable for measuring3-ph combined voltage, ammpere & frequency simultaneously in three independent windows with ultra LED display complete all as specified and as directed. Make : Neptune/AE /L&T |
| 84 | Supplying and replacement of Digital meter square type suitable for measuring3-ph voltage with builtin selector switch and having ultra LED display complete all as specified and as directed. Make : Neptune/AE/ L&T |
| 85 | Supplying and replacement of Digital meter square type suitable for measuring3-ph ampere with builtin selector switch and having ultra LED display complete all as specified and as directed. Make : Neptune/AE / L&T |
| 86 | Supplying and replacement of Digital meter square type suitable for measuring frequency in three digits with 0.1 Hz resolution and having ultra LED display complete all as specified and as directed. Make: Neptune/AE/L&T |
| 87 | Supplying and replacement ofLED Indicator lamp (Red , Yellow ,Blue & Green ) suitable for DG Panel complete all as directed. Make : Havells/L&T/ABB |
| 88 | Supplying and replacement of Start & Stop Push button / Switch as per suitable for existing panel complete all as directed. |
| 89 | Supplying and replacement ofOperating Handle Kit (handle + shaft +center bush + bush clip)of On load& Panel mounted type changeover switch any capacity & ratingas per existing complete with fixing to make functional with operating handle complete all as specified and as directed. |
| 90 | Supply and fixing in replacement On-Load Changeover Switch( I-O-II) ,415 volts, 50 Hz, four pole of capacity 400 Amps with open execution typeand with operating handle including replacement of incoming and outgoing lugs and provision of fixing arrangement on panel with all conection complete after taking down old one complete all as specified and as directed. Make : Havells/Schneider/L&T. |
| 91 | Supply and fixing in replacement On-Load Changeover Switch( I-O-II), 415 volts, 50 Hz, four pole of capacity 400 Amps with SS enclouser and with operating handle including replacement of incoming and outgoing lugs and provision of fixing arrangement on panel or as per direction with all conection complete after taking down old one complete all as specified and as directed. Make : Havells/Legrand/Schneider/Siemans/L&T. |
| 92 | Supply and fixing Automatic transfer switch AC with encloure, 415 volts, 50 Hz, four pole of capacity 400 Amps for automatic and manual operation with complete protection including fixing arrangement on panel / wall complete with all necessary controll wiring to make functionalof ATS complete with testingl complete all as specified and as directed. Make : Havells/Legrand/Schneider/Siemans/L&T |
| 93 | Supply and fixing in replacement MCCB 4 poles 415 volts adjustable thermal and adjustable magnetic setting typeof capacity 200 Amps (frame as per existing)with breaking capacity 36 KA complete including taking down existing unserviceable including fixing arrangement on panel/wall complete all as specified and as directed. Make : Havells/L&T/Schneider |
| 94 | Supply and fixing in replacement MCCB 3 poles 415 volts, adjustable type both thermal & magnetic 160 Amps (frame as per existing)with breaking capacity 36 KA complete including taking down existing unserviceable including fixing arrangement on panel/wall complete all as specified and as directed. Make : Havells/Schneider/L&T. |
| 95 | Supply and fixing in replacement MCCB 4 poles 415 volts, adjustable type both thermal & magnetic 400 Amps (frame as per existing) with breaking capacity 36 KA complete including taking down existing unserviceable including fixing arrangement on panel/wall complete all as specified and as directed. Make :Havells/Legrand/Schneider/Siemans/L&T |
| 96 | Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy dutyelect cable with stranded aluminiumconductor 1100 volts grade cross section area 185 Sqmm 3.5 core and laid in trenches / duct / fixing on panels /walls /poles or passing through pipe including connecting with suitable lugs, thimble ,glands, nuts and bolts to existing Panel / DG set and testingcomplete all as directed including taking out the old burnt out cables any size or type complete all as specified and as directed. Make: Havells/CCI/Gloster/RR Cable/Polycab/Grandlay Note: LT Cable joint, Lugs, Thimble, Gland, Nut & bolts shall be included in quoted item rate. |
| 97 | All as per item serial No. 75.00 above but of cross sectional area 120 Sqmm, 3.5 core complete all as specified and as directed. |
| 98 | All as per item serial No. 75.00 above but of cross sectional area 95 Sqmm, 3.5 core complete all as specified and as directed. |
| 99 | Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out complete all as specified and as directed. |
| 100 | Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. |
| 101 | Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified and as directed |
| 102 | M&L for clean dry sand laid in trenches/ducts/ fuel store for bedding and cushioning , including spreading and levelling ccomplete all as specified and as directed. Note : For payment punned depth shall be measured as specified. |
| 103 | M&L for laying in trenches un-reinforced precast cement concrete cable cover, class LV type 1, flat, size 250mmx150mmx40mm for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified and as directed. |
| 104 | Supply and fix end termination cable jointing kit heat shrink type for 1.1 KV grade cable and suitable for indoor/outdoor complete with jointing accessories including nut bolts, thimble, lugs and suitable for 3.5/4.00 core XLPE armored AI conductor cbale of size 70 to 185 sqmm complete all as specified and as directed. Make : Raychems/Denson/M-seal/Birla-3M |
| 105 | Supply & installation ABC stored presure type fire extinguishers 6Kg cap having jet pressure range of 6mtr.including taking out old unserviceable any type and capacity complete all as specified and as directed. |
| 106 | M&L for writing details of E&M installation on boards / Panel / Wall etc. as directed with fluorecent paints andletters or figures n.exc. 30cm high complete including preparation of surface complete all as specified and as directed. |
| 107 | M & L for earthing for DG sets & AMF panels complete with galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr below normal GL with the top edge of the plate not less than 1.5 mtr below the normalground level connected to GI strip of size 32mmx6mm and watering pipe 20 mm bore GI pipe ( medium grade ) and chamber PCC(1:4:8) type D2 using 40 mm graded stone aggregate, coping shall be (1:3:6) type C1 using 20 mm graded stone aggregate and RCC (1:2:4) type B1 using 20 mm graded stone aggregate pit cover 50 mm thick re-inforced with 8 mm tor MS bar at 80 mm c/c both way including excavation and earth work and removal of surplus soil of earth complete all as shown in electrical plate No. 3 of SSR Part-I and as specified including test point,charcoal dust,common salt complete and earth lead upto 7.5 Mtr connected to earthingtest point all as specified and testing of eathing on completeion complete all as specified and as directed. |
| 108 | M&L for GI strip of size 32x6mm as earth continuity conductor burried in ground or drawn in pipe or fixed to wall on saddle/insulator as required and connecting topanel/body and dismantling unserviceable strip any type/size ccomplete all as specified and as directed. |
| 109 | M&L for detectingthe faulty/ burntelectric cable ofany size from DG set toDG Panel/Main Panel by trench out and length / distance not exceeding30 RM and repair / joint the electric cable through cable joint kit of suitable sizeand madepanel functional with allincoming and outgoing cable connectionincluding tightening loose cable/strip connections, removal of dirt,dust and carbon particles by air blower, rubbing emmery paperreplacement of worn out thimbles,nut, bolt & washers, replacement of control wiring of panel etc including excavation, R&F & removal of excavated surplus soil to a distance not exceeding 50 mtrcomplete tocomplete all as specified and as directed. Note : (i) Additional spare partssuch asCable , cable joint kit ,MCCBs will be measured & Paid separetly under relevent item of Sch "A" as supply & fixing. (ii)Replacement of burnt control wiring of panel, Cable lugs, nut- bolts , thimble etc. shall be deemed to be included in unit rate. |
| 110 | Supply and fixing in replacement MCCB 3 poles 415 volts adjustable thermal and adjustable magnetic setting type of capacity 250 Amps with breaking capacity 36KA complete inclduing taking down exising unserviceable including making fixing arrnagment on panel/wall complete all as specified and as directed. Make : Havells/L&T/Schneider |
| 111 | Supply and fixing in replacement MCCB 4 poles 415 volts, adjustable type both thermal & magnetic capacity 250 Amps with breaking capacity 36 KA complete including taking down existing unserviceable including making fixing arrangment on panel/wall complete all as specified and as directed. Make : Havells/L&T/Schneider |
| 112 | Supply and fixing in replacement MCCB 3 poles 415 volts, fixed type 100 Amps with breaking capacity 10KA complete inclduing taking down exising unserviceable including making arrnagment on panel/wall complete all as specified and as directed. Make : Havells/L&T/Schneider |
| 113 | Supply and fixing in replacement DG Engine heat sensor switch and Radiator heat sensor switch as per existing model complete and complete all as specified and as directed. |
| 114 | Supply and fixing in replacement earth fault moduleof 200 Amp ratingsuitable for 3 phase 415 volt 4 wire system with connection complete all as specified and as directed. Make : L&T/Havells/ABB |
| 115 | Supply and fixing maintenance free Lead Acid Battery 12V, 90 AH with initialy charged complet with installed at site complete all as specified and as directed. Make : Exide (Brand : Exide Express)/Amron / Prestolite / Power Tech / Tata / Livfast |
| 116 | Supply and fixing Automatic transfer switch AC with encloure, 415 volts, 50 Hz, four pole of capacity 200 Amps for automatic and manual operation with complete protection including fixing arrangement on panel / wall complete with all necessary controll wiring to make functionalof ATS and testing complete all as specified and as directed. Make : Havells/L&T/ABB |
| 117 | M&L for chemical earthing with GI pipe electrode 3.0m long having outer pipe dia 80mm & inner pipe dia 50mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40% , copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zink sulphate 10%, Aluminium Sulphate 10% burried in ground by digging a bore of 150mm dia surrounded by soil friendly backfill compound non soluble in water including connection with copper strip 20 x 3 mm, making PCC pit of size 0.3m x 0.3m x0.3m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B1, 40mm thick cover reinforced with 8mm dia MS TMT bars 3 Nos both ways with lifting hook made out of 8mm dia bar and testing on completion to achieve value not more than 1.0 ohm including writing earth value on earth pit cover complete all as specified and directed. Note : Provision of copper strip size 20 x 3mm upto 7.5 m length shall be included in the quoted rates. |
| 118 | Supply and fixing in replacement By Pass switch415 volts, 50 Hz, four pole of capacity 400 Amps with open execution type including with 2NO+2NC auxiliary contacts and with operating handle including replacement of incoming and outgoing lugs and provision of fixing arrangement on panel with all conectionafter taking down old one complete all as specified and as directed. Make : Havells/ABB/L&T |
| 119 | Dismantling alternator from the engine base of DG set any capacity and rewinding of field coils of alternator with super enamelled wireincluding varnishingand heating including reassembling and testing for capacity of DG Set form 30 KVA to 250 KVA complete all as specified and as directed. |
| 120 | M&L for complete Cleaningand washingof Solar PV modules of Solar Tree Plant(05 KW ) installed at site complete all as specified and as directed. Note : Cleaning tools,brush, water spray pipe, washing solution as per OEM recommendations shall be included in quoted rate of item. |
| 121 | M&L for repairing and checking of serviceability to proper functional of Solar Power Generation Plant (Solar Three structure of capacity 5KW) including with check all electrical wiring connections of module with output voltage (Voc) string voltage and solar invertor, replace defective DC control wiring of module to module and invertor conection wiring as per existing and checking of module separately as per manufacturer recommendation to give proper functional, replacement of unservicceable MC 4 wire connector (Male & Femal) as per existing and replace faulty fuse connector & MCB from DC DB box panel complete all as per directed by Engineer-in-Charge. Note : Replacement of burnt control wiring of module, DC DB fuse connectors & MCBs, MC 4 connector, cable lugs, nut-bolts, thimble etc shall be deemed to be included in unit rate. |
| 122 | Supply and fixing in replacement of ECM (Engine control Module) unit control device with ECM connector relay unit set & all connecting accessories with control wiring testing for (Engine make cummins) complete all as specified and as directed. |
| 123 | Supply and fixing in replacement DG Engine oil pressure sensor kit complete with control wiring complete as per existing model complete all as specified and as directed. |
| 124 | Supplying, installing, testing and commissioning of CPRI approved factory made 3 phase, 4 wire, 415 volts OUT door DG AMF (Auto mains failure)Panel with double doors,IP 54 protected, aluminium Bus bar 250 Amps rating, with panel outer sheel 3.15mm and inner shell made out 2mm thick powder coated CRCA sheet with front and rear operated doors with looking arrangement including danger notice plate, internal wiring with copper wire and duly mounted on 04 Nos angle iron Legs of size 50x50x6mm thick, fixing of 2 Nos LT danger notice plates of standard size and incomming/outgoing cable connection with suitable thimbles & lugs and grouted in cement concrete 1:2:4 type B1 as directed and including fitted accessories in DG AMF Panel as per following accessories:- (a) MCCB 4 Pole 415 volts 100 Amp. 25 KA fixed thermal and fixed magnetic (For Main & DG) - 02 (b) Power contractor 4 Pole, 100 Amps complete with auxilary contacts, coil suitable for DG AMF Panel for (Main & DG) - 02 Nos. (c) Bypass Changeover switch for rating 100 Amps 4 Pole (Both for DG and main supply) - 02 Nos (d) Complete accessories for DG AMF Panel like timer relay, over & under voltage relay etc as required to fully functional of DG AMF panel & complete wiring- Complete Set (e) Digital meter with voltmeter, ammeter, selector switch, CTs Control fuse and indicating Lights- 01 Set |
| 125 | Note : (i) All essential items to be fitted in AMF panel for smooth and safe auto functional DG or main supply and the cost shall be included in quoted rate of item. (ii)The contractor will be fully responsible for providing the trend DG technician within 02 hours to rectify the defect in DG set and AMF panel. If the contractor loses his responsibility the contractor will be fined at the rate of 10000/- per day till the fault is rectified and penalty will be deducted from his due payment. (iii) Before placing order for procurement drawing of panel shall be got approved from Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
