Tender For Construction Of Veer Durgadas Panorama, Jodhpur (Raj.)
Tender Value
2.68 Crore
Estimated cost
Bid Submission
15 Feb 2023
0 days left
EMD
5.37 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Veer Durgadas Panorama, Jodhpur ( Raj. )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50 m and lift u pto 1.5 m , disposed earth to be levelled and neatly dressed:Hard Rock (Blasting prohibited) useful material 30% |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidatingeach deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. |
| 3 | Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. |
| 4 | Carriage of materials Earth andSand for 10 Km. |
| 5 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level :1:1:2 (1-Cement:1-Coarse sand:2-graded stone aggregate 20 mm nominal size). |
| 7 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. |
| 8 | Random Rubble stone masonry with hard stone insuperstructure above plinth level and upto five level above30cm. thick walls in.Cement Mortar 1:6 (1-Cement:6-Sand). |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement :1:1:2 (1-Cement:1-coarse sand:2-graded stone aggregate 20 mm nominal size). |
| 10 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for:Walls (any thickness) including attached pilasters, buttresses, plinth and string course. |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). |
| 12 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for:Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. |
| 13 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. |
| 14 | Add extra for additional height in centring, shutteringwhere ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at alllevels, over a height of 4.5 m, for every additional height of 1 metre or part thereof (Plan are is to be measured) |
| 15 | Add Extra for Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix. |
| 16 | Random Rubble dry ston kharanja under floor |
| 17 | Brick work with machine moulded perforated brick of class designation 125 confirming IS: 2222-1991 in super structure above plinth level V level in CM 1:6 |
| 18 | Polished Blue Kota Stone slab flooring 25 mm thik, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete For area of each slab from 2001 to 5000 Sq. Cm : |
| 19 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls.Floor etc. laid on 12 mm AV. Thick base of cement mortar 1:3 jointing with white cement mortar 1:2with pigment to match the shade of the marbel slab including grinding .rubbing and polishing complete. South Zed Black above 3601 cm square slabs |
| 20 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish. |
| 21 | 6mm thick cement plaster 1:3 ( 1cement : 3 fine sand) finished with a floating coat of neat cement and thick coat ofLime wash on top of walls when dry for bearing of R.C.C slabs and beams. |
| 22 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 23 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 24 | Precast terrazo tiles of approved make, 20mm thick with marble chips of size upto 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20mm thick bed of cement sand mortar 1 : 4. |
| 25 | Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry: Size 125X 100 MM. |
| 26 | Supplying and fixing ashlar stone chhajja 5 to 7 cm. thick all exposed surface fully fine dressed, weather dripped includin 75x75mm. Cement batta (1:2:4) between chhajja & wall (single piece upto 1:2m length) : |
| 27 | Providing and fixing of machine cut Soorsagar white stone pavement size 600x600 mm and 50 to 75 mm thick over 20 mm thick base cement sand mortar 1:6 be placed at 50-60 mm interval as per existing pavement design. (used single piece 60 cm x 60 cm.) |
| 28 | Supply and fixing Jodhpur sand stone Machine cut Kerb stone (10cm wide 40 cm. height)fixed in white cement sand mortar 1:4 with pigment including EarthWork. |
| 29 | Providing and fixing stainless steel railing made of Hollowtubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required)and fitting the same with necessary stainless steel nuts andbolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners , stainless steelbolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval ofEngineer-in-charge, (for payment purpose only weight ofstainless steel members shall be considered excluding fixingaccessories such as nuts, bolts, fasteners etc.). |
| 30 | Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint |
| 31 | Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum( minimum thickness of powder coating 50 micron) |
| 32 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.). With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) |
| 33 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design |
| 34 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls,pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm |
| 35 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate,screws,making connections, testing etc. as required. GP1 Short point (up to 3 mtr.) |
| 36 | Medium point (up to 6 mtr.) |
| 37 | Long point(up to 10 mtr..) |
| 38 | Long point(up to 10 mtr..) |
| 39 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modularswitch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. GP1 On board |
| 40 | Long point(up to 10 mtr..) |
| 41 | Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tles, Hot Dipped Galvanized M.S Modularbox of 20 SWG with earth terminal,6 A two way Modular switch, Modular plate with grid plate,screws,making connections, testing etc. as required. GP1. Long point(up to 10 mtr..) |
| 42 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required.Gr I 20 mm |
| 43 | 25 mm |
| 44 | 32 mm |
| 45 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.Gr I 3x 1.5 sq.mm |
| 46 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 47 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 48 | 1 x 6.0 sq.mm |
| 49 | 4 x 6.0 sq.mm |
| 50 | 1 x 10.0 sq.mm |
| 51 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 52 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Gr I Single pole MCB 6 A to 32 A rating |
| 53 | Double pole MCB6 A to 32 A rating |
| 54 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.Gr I Metal door (single phase) IK-09 and IP-43 with Metal end box 12 Way |
| 55 | Glazed door (Three phase) IK-09 and IP-43 with Metal end box 4 Way |
| 56 | P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing ,phophatised ,powder painted complete with insulated suitable ratingcopper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. GP1 Double door. 4 Way |
| 57 | Providing & Fixing of modular type switch/ bell push duly ISI marked (IS:3854) with CM/L no. printed and made out of unbreakable and fireretardant vergin UV Stabilized Polycarbonate with brass terminals andcaptive screws & silver alloy contact tip with IP-20 rating ,minimum widthof switch toggle( PUSH PART ) should not less then 20mm, including all asper pre approved by Engineer in charge,making connections, testing etc. asrequired. For additional technical parameters of product / work referAnnexure \"A\" attached with this BSR 10 A one way switch |
| 58 | 16 A one way switch with led indicator |
| 59 | 10 A bell push switch |
| 60 | Providing & Fixing of Wiring Accessories OEM fabricated following size GIbox of 1.2 mm thick with earthing terminal and adjustable floating clamp inrecess/ surface suitable for modular accessories as required.All as per preapproved by Engineer in charge. For additional technical parameters ofproducts/ work , refer Annexure \"A\" attached with this BSR . 1-2 Module |
| 61 | 3 Module |
| 62 | Plate Earthing as per IS:3043 with copper Earth plate of purity >95% ofsize 600mm x 600mm x 3.0mm by embodying 3 mtr. below the groundlevel with 20 mm dia. G.I. \"B\" class watering Pipe ,including all accessorieslike nut, bolts, reducer, nipple, wire meshed funnel, and Heavy dutyweather proof poly-propylene earth pit chamber with lockable Jam freelid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. andembodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less asrequired & must record by engineer in charge during site visit and ensureto enter in measurment book. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSR . plate Earthing- |
| 63 | Providing & Fixing of 1200 mm sweep BLDC technology power savingceiling fan which can withstand on votage fluctuations from 140 volts to240 volts ,power factor not less then 0.9 , service value (CMM/W)minimun 6.85 , air delivery minimun 220 CMM, speed minimum 330 RPM( tolerance as per IS:374 2019 ) THD less then 10% and complete withdown rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mmnominal thick medium duty steel pipe up to 80 cm , cotter pin with 3 x1.5 sq.mm pvc insulated flexible copper conductor making connectiontesting etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work , refer Annexure\"A\" attached with this BSR . without remote |
| 64 | P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlength extended on each side . All as per pre approved by Engineer incharge. For additional technical parameters of product / work referAnnexure \"A\" attached with this BSR |
| 65 | Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy = 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.=0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own inhouse NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . 600mm , Min. Lumens output 1800 lm LED Tube rod with Polycarbonate Housing |
| 66 | Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy =100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure \"A\" attacheded with thisBSR. 18/20W |
| 67 | P. & F Europian type white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor . SIZE -580 |
| 68 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size-530X410 |
| 69 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVCbend as per IS : 7231 . |
| 70 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 400 mm |
| 71 | P& F waste Pipe with all fitting P.V.C with PVC nut 32 mm |
| 72 | P & F Looking Mirrors with P.V.C. frame of approved (Atul/equivalent) Size 500x400mm |
| 73 | P&F Twin-peg of approved quality/ makeCP Brass heavy & superior quality |
| 74 | P & F Pillar Cocks (IS :8934 Mark) of superior quality and approved make: C.P. Pillar cock, 15 mm dia nominal bore |
| 75 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.- do - with 37 cm long pipe and nut |
| 76 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore. |
| 77 | Gun-metal 25mm nominal bore. |
| 78 | Providing & Fixing GI pipes (internal work) with GI fitting s( IS 1239Mark ) and MS clamps including cutting and making good the wall and floors ( Class B) Exposed on wall15 mm dia nominal boreB class |
| 79 | 20 mm dia nominal boreB class |
| 80 | 25 mm nominal bore |
| 81 | 32 mm nominal bore |
| 82 | P & F GI pipes (external work) with GI fittings ( IS 1239 mark) including trenching and refilling earth. Etc (Class B) 40 mm Nominal bore |
| 83 | 50 mm Nominal bore |
| 84 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications : (Width W= Dia of pipe in Cm+ 40Cm.) concrete width to be reduced from width W at center of pipe to ‘0‘ at top of pipe.(Excluding cost of pipe) 150mm dia S.W. pipe |
| 85 | Providing and Fixing Unplastricized Poly Vinyl Chloride (UPVC) SWR Pipe Type B for sciland waste discharge system (IS 13592 : 1992 Marked ) of approved quality / make. 110mm dia PVC Pipe 110 mm dia |
| 86 | PVC Pipe75mm dia |
| 87 | Providing and Fixing Unplastricized Poly Vinyl Chloride (UPVC) SWR Pipe fitting Type B for sciland waste discharge system (IS 13592 : 1992 Marked ) of approved quality / make. 110mm dia Single tee with door 110mm |
| 88 | Bend 87.5 110mm |
| 89 | Bend 87.5 75mm |
| 90 | Single tee 75mm |
| 91 | Nahani trap with Jali 110mm |
| 92 | Pipe Clips 110mm |
| 93 | Vent Cowel |
| 94 | Construction of manhole in all type of soil iner size 90x60 cm. thick masonry in CM 1:6, 10 Cm. thick cemetn concrete 1:5:10 in foundation 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C.flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring 25 Kg. CI cover with frame of 450mm dia dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5 M. |
| 95 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 100mm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside sizesize 450X 450 mmupto depth of 0.5m & 15Kg C.I cover with frame |
| 96 | P & F Square-mouth gully trap `A` grade (IS 651-1992:marked) of approved make complete with C.I. grating, frame& Cover masonary chamber in C.M. 1:6, 100mm thick C.C.1:5:10 base concrete, 40mm thick C.C.M-15 grade coping,12mm thick cement plaster in CM 1:3 complete as perapproved design & type. Trap size 150 X 100mm, ferrow cement cover with frame,Internal Chamber size 300 X 300mm. |
| 97 | Construction of septic tank in all types of soil with 40 cm. Thick masonry in CM 1:6 15 Cm thick C.C bed of 1:5:10 M grade C.C flooring & over stone slab covering, 80 mm thick slab jointing of slab in CM 1:3 Ralthal, Kharajna, 50 mm thick stone pratition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design, two No. 450 mm dia 25 Kg each CI cover with frame, earth work etc. complete as per approved drawing including disosal of surplus earth within a lead of 50 mtr. Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC(M-20) slab with Tor steel reinforcement 10mm ? @15 cm c/cbothways including shuttering complete in all respect. |
| 98 | P & F Liquid Soap Container with brackets complete of approved make C.P. brass. |
| 99 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 100 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C. P. Brassswan - neck Long body, 15mm nominal bore weight not less than 690 gm |
| 101 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete Brass wt.Not less than 400 gm, 20mm. |
| 102 | P & F Toilet Paper Holder with rod of approved quality/make:C.P. brass (Heavy and Superior quality) |
| 103 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm. |
| 104 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots |
| 105 | P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.(Excluding cost of cement) For 3 Urinals |
| 106 | P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor: Size 450x350mm |
| 107 | P & F PVC Storage Tank (IS : 12701marked indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:5000 litr. |
AI Tender Summary
Tender Timeline
Feb 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender