Public Works Department-PWD has published Tender For Rectification Of Black Spot Under Execution Of Road Safety Engineering Works On State Roads Under Head 3054 (Kurali Portion). Submission Date for this Tender is 17-02-2023. Road Work Tenders in S.A.S Nagar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Feb-2023 | Corrigendum | Date | 17-02-2023 |
| Sl. No. | Item Description |
| 1 | Clearing and Grubbing Road Land: Clearing and grubbing road land incluidng uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctiond, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical clause 201 of MORT&H specifications (24.2c) |
| 2 | Dual-Directional reflective speed-breaker/rumble-strip yellow plastic high impact resistant plastic body of size 275 x 150 x 32 mm having 6 glass large 12 mm dia white reflector lenses to one side (12 Nos on both side) provided with two steel zinc plated nails of 12mm and of length 120mm for fixing to road by hammering. (NS item) |
| 3 | Mandatory sign board 600mm circular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. Fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67- 2012 . (24.45 b) |
| 4 | Cautionary sign board 600x600x600mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloyrivets @ 200 mm c/c to back support frame of25x25x3mm angle iron supported on a squarehollow steel section post 60x60x3.2mmmm conforming to IS 4923 without cost of definitionplate firmly fixed to ground in foundation concreteM-25 of size 0.45x0.45x0.60mfor vertical postcomplete as per clause 801 of MORT&Hspecifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retroreflective sheeting & a certified copy of testreports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 ; Using high intensity Microprismatic grade retroreflective Sheeting Type XI as per ASTM D 495609 and as per IRC 67 2012(24.44 b) |
| 5 | Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. specifications. Fixed over 3mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame welded with vertical post of sign board complete as per clause 801 of MORT&Hspecifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 ;Using high intensity Microprismatic grade retroreflective Sheeting Type XI as per ASTM D 495609 and as per IRC 67 2012 (24.49 a) |
| 6 | Road Marking with Thermoplastic compound.Road marking with hot applied thermoplasticcompound 2.5mm thick including reflectorisingglassbeads@0.25kgper sqm area as perIRC:35 1997 complete as per technical clause803 ofMORT&H specifications (24.57) |
| 7 | 2.5 mm thick white lines |
| 8 | 5 mm thick Yellow lines |
| 9 | Moulded Shank Road Stud :Supplying and fixing of single mould twin shankreflective road studs made out of polycarbonate/ABS moulded body and reflectivepanels with micro prismatic lens or Glass Beedscapable of providing total internal reflection of thelight entering the lens face with retro reflectanceand chromaticity values shall be as given in thedetailed specifications and the product shallconform to ASTM D4280. The raised pavementmarker shall also meet all the testing conditions ofASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks ofnot less than 20 mm diameter and not less than30 mm length shall be molded in the RPM body.The marker shall support a load of 13635 Kgtested in accordance with ASTM D4280. Themarker shall withstand flexural strength of 909 kgfforce in accordance with ASTM D4280. Markerlenses shall be moulded of Polycarbonate ormethyl methecrylate conforming to ASTM D788.The supplier shall provide a 2 years warranty forsatisfactory field performance as per clause804.7.3 of MORT&H 5th revision specifications (24.63) |
| 10 | Solar RPM/ Stud Providing and installation of solar cateyeproduced from an engineered polymer selectedfor superior impact resistance and weather-ability.The top of the solar stud should be transparent forsolar charging and light output in active mode.The base of the body shall be yellow or neutrawhite as approved by Engineer In-charge. Themarker shall incorporate a solar panel (comprisingof solar cells) for converting solar energy intoelectricity, a storage device for storing the energy,LEDs for illumination and a design for providing360 degree smooth illumination. The Solar studshall be round in shape for providing illuminationin all directions. The solar stud shall also havehigh reflective lenses for conspicuity in passivemode and dual shanks for improved roadpresence. The solar studs are intended forapplication directly onto pavement surfaces andshall be applied with epoxy resin adhesivesdesigned for use with raised pavement markersand as supplied by the marker manufacturerseparately. The solar cateye shall be of height: 6± 2 mm & Maximum Diameter: 136 ± 4 mm. Thebody of the solar cateye shall be resistant to dustand water ingress as per IP 65 standards. Themarker shall support a load of 13635 Kg tested inaccordance with ASTM D4280.(24.65) |
| 11 | Solar Blinker(NS) |
| 12 | Hazard Marker Sign Board 300x900mm Rectangular Hazard Marker Sign board 300x900mm rectangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet with 25x25x3mm angle iron frame supported on a mild steel angle iron post 65x65x6mm firmly fixed to ground including foundation concrete 1:2:4 of size 0.45x0.45x0.60m for vertical post complete as per technical clause 801 of MORT&H |
| 13 | Add Culture Cess @ 1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
