Tender For Construction Of 02 Nos D Type Quarters At Chc, Barachana Under Barachana Block In The District Of Jajpur For The Year 2022-23 Under Ombadc
Tender Value
75.09 Lakhs
Estimated cost
Bid Submission
15 Feb 2023
0 days left
EMD
76000
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
badachana → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 02 Nos D Type Quarters At Chc, Barachana Under Barachana Block In The District Of Jajpur For The Year 2022-23 Under Ombadc
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Feb-2023 | 1st corrigendum | Other | 15-Feb-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in all kinds of soil upto the required depth including moorum, stoney earth and earth mixed with boulders except sheet rocks and boulders requiring blasting including dressing, leveling the bed and depositing the excavated materials away from work site with initial leads and lifts, T&P shoring, shuttering and dewatering if required etc, complete as directed by the Engineer-in–charge. |
| 2 | Supplying filling in foundation, plinth & core with sand in layers not exceeding 150mm thick including watering, ramming, cost, conveyance, royalty and taxes of all materials and cost of all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). |
| 3 | Cement concrete (1:3:6) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 4 | Cement concrete (1:2:4) in foundation and floors using 12mm(½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 5 | RCC M-20 usingblack hard granite crusher broken chips of 10mm to 20mm size (10mm 40% and 20mm 60% ) of approaved qualityfrom approved quarry to achieve the minimum compressive strength of 200kg/cm2 250kg/cm2, 3.00 kg/cm2 of 150mm size cubes on 28 days test confirming to codal provision including hoisting lowering and laying concrete in layers not exceeding 15cm thick compacting in vibrators and watering for 28 days including centering shuttering from works finishing the exposed surface smooth providing grooves where necessary including cost conveyance royalty taxes of all materials with all leads and lifts and cost of all labour T&P mechineries required for the work de-watering if necessary compalete in all respect as directed by Engineer-in-charge including dismantling the centering and shuttering but excluding cost conveaynce of MS rod or tor steel & bind wire and labour charges for strengthening cutting beinding binding wilding and tying the grills etc hoisting and placing in positing (to be paid separetely for RCC work)A.COLUMN BASE FOOTING |
| 6 | B. COLUMN SUPERSTRUCTURE |
| 7 | HEAD ROOM |
| 8 | C. PLINTH BAND |
| 9 | D. LINTEL BAND |
| 10 | E. FLOOR BEAM |
| 11 | HEAD ROOM |
| 12 | F. CHAJJA |
| 13 | G. STAIR CASE |
| 14 | H. ROOF SLAB |
| 15 | HEAD ROOM |
| 16 | Straightening the coiled or bent up M.S. rod / HYSD bars confirming to Gr. S 240 or S 415, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, coping, welded joints, spear bar, chair, stage, hanger andbinding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987. |
| 17 | HEAD ROOM |
| 18 | Fly ash Brick masonry using Fly ashBricks in FOUNDATION AND PLINTHhaving crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 19 | Fly ash Brick masonry using Fly ashBricks in SUPERSTRUCTURE having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 20 | HEAD ROOM |
| 21 | Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 22 | HEAD ROOM |
| 23 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smoothwatering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 24 | HEAD ROOM |
| 25 | Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth in ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 26 | HEAD ROOM |
| 27 | Supplying fitting and fixing vitrified tile(SOMANY, KAJARIA, JOHNSON) in floorsof size 600mmx600mmin floor of approved quality over 25mm thickcement mortar(1:1)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge |
| 28 | Supplying fitting and fixing vitrified tile(SOMANY, KAJARIA, JOHNSON) in floorsofin dadoo of approved quality over 25mm thickcement mortar(1:3)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge |
| 29 | Providing 20mm thickGranitetile of above 0.40 sqm size over 20mm thick bedof approved quality colour and size above 0.10 sqm in floors treads on steps and landing on 20mm thick bed of cement mortar mix of (1:4) with screened and washed sharp river sand for mortar and cement of approved quality grouted with neat white cement slurry laid in proper slopejoining the Kota stone with neat white cement slurry mixed with required of pigment of approved marksto match the shades of the kota stone to kota colour if required watering and curing for the required period including cost conveyance loading unloading royalties and taxes of all materials cost of all laboursundries T&P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at allheight in all respect as directed by the engineer-in-charge |
| 30 | Supplying, fitting, fixing of Chequred tiles in floor of approved quality over 25mm thickcement mortar(1:1) including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 31 | Providing priming two coatwith approved primerincluding cost, conveyance, taxes, cost of all labour as per direction and specification of Engineer in charge |
| 32 | HEAD ROOM |
| 33 | Finishing the wall surface with Acrylic Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge.A. GROUND FLOOR |
| 34 | HEAD ROOM |
| 35 | Finishing wall surface two coats of plastic emulsion paint over a coat of water bound primer to given an even shape of the surface including cleaning the surface with sand papering and using primer & paint of approved shade incluidng cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge. |
| 36 | HEAD ROOM |
| 37 | Finishing wall surface two coats of weather coat over a coat of water bound cement primer with cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge. |
| 38 | HEAD ROOM |
| 39 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, crital frames for windows, balustrades of stair case and parapet railing made out of M.S Square bar/ flat as per approved drawing and design including making holes in walls and R.C.C structure, wood work etc., and making good to the damages to walls with cement concrete (1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) of approved quality with cost of all materials, labour, cost of welding, all T&P, sundries etc. complete in all respect as per specification & direction of the EI.C. (Screws & other hardware required materials to be used in the work shall be of approved quality & specification & shall have to be supplied by the contractor at his own cost.) |
| 40 | HEAD ROOM |
| 41 | Painting two coats with approved synthetic enamel paints to M.S. window and verendah grill over a coat of primer wahs in sand paper or iron paper received to paints smoothlyincluding cost, conveyance, taxes, cost of all labour as per direction and specification of Engineer in charge |
| 42 | HEAD ROOM |
| 43 | Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge. |
| 44 | Providing and fixing of WPC solid door frame (4x2.5 solid frame single patti with installation charges with cost of labour, conveyance, taxes, loading, unloading T&P etc. all complete as per the direction of Engineer in charge. |
| 45 | Supplying and fiting fixing of Un-plasticised Poly Vinyl Chioide (UPVC) (FENESTA/NCL VERA LTD casement Door -60- series duly manufactured using UPVP reinforeced profiles of 60mmx55mmx25mm for outer frames 102mmx80mm for casement Door such profile and 74mmx60mmx2.5mm mullion profile capable of mouting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thicknessof 2.0 mm prefabricated and welded through fusion welding the doorsuch shall be fited with 12mm WPC board of reenply make duly fixed with EPDM weathering seal resistant accessories likecliping ocking system made of aluminium 1 No per set of sashes and the systemis to be installed at the side using anchor fasteners silicone rubber sealant, easy glazing/egiazing at sideetc inlcuidng cost and conveyance of all materailsconfirmingto ASTM D638-14EN-477-95 and the applicable codes and standards. |
| 46 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTAI Three Track - Three Panel sliding window- 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 25 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners. silicon rubber sealant. easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . |
| 47 | 2.5cm thick grading concrete (1:2:2) using 6mm thick crusher broken hard granite chips with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 48 | Finishing walls with two coats ofwater proofing cement paints to give an even shape to the surface including cleaning the surface, sand papering and using paint of approved quality and approved shade including cost conveyance, taxes of all materials all labour & T&P etc. complete as directed by the Engineer-in-charge. |
| 49 | E.I. work-Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as arth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire- Finolex/ L&T / Anchor / Havels or eq. model ) (Make of switch-Anchor Roma/Legrand arteor/Panasonic Visionor eq. model)Group-A L.P-10 |
| 50 | Group-B L.P-18 F.P-6 |
| 51 | Group-C L.P-18 F.P-4E.F.P-6C.B.P-2 |
| 52 | Separate Point wiring for 5 / 6 amp modularsocket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular one way type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire- Finolex / L&T / Havels/Anchor) (Make of switch-Anchor Roma/Legrand arteor/Panasonic Vision or eq. model) |
| 53 | Supply and fixing of 5Amp modular switch and socket on existing board (Make of switch-Anchor Roma/Legrand arteor/Panasonic Vision or eq. model) |
| 54 | Supplying and fixing of metal box of Modular G.I box for 6 module 18 SWG on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 15 / 16 amps modular socket outlet and 15 / 16 amps modulartype switch, connection, painting etc as required.( Make of wire-Anchor/ Finolex / L&T / Havels) (Make of switch-Anchor Roma/Legrand arteor/Panasonic Vision or eq. model) |
| 55 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL or eq model) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 56 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
| 57 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 58 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 59 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existingsurface/recessed/STEEL /PVC conduit as required for Inverter wiring. 1 X 1.5sqmm |
| 60 | Supply and fixing of 15 Amp Top including all acessories and connection for Inverter ( Make : Cona/Anchor/Legrand/Havels) |
| 61 | Supplying and fixing of computer board consisting 3 nos 6 Amp Plug, 3 nos switch, 1 No 15 Amp Switch & 1 No 15 Amp Socket Modular type on modular box, base & cover with all connections ( Make of wire-Anchor/Finolex / L&T / Havelsor eq. model ) |
| 62 | S/F of A.C point consisting ofstatorwith 1 No 15 Amp Socket Modular type on modular box, base & cover with all connections completein all respect as per direction of Engineer in charge (Cona / Anchor / Havels or eq. model) |
| 63 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make- Legrand /L&T/Schneider /Siemens or eq. model) 8way,Double door |
| 64 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make- Legrand /L&T/Schneider /Siemens or eq. model) 6 to 32 SP MCB |
| 65 | 6 to 32 DP MCB |
| 66 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) 63Amp ICDP main switches |
| 67 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling roseas per direction of Engg.-in-Charge . |
| 68 | S/F of 9Watt LED bulb (Make-Havells/Philips/Crompton or eq. model) |
| 69 | Supply and fixingCALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model ofSchneider/Hager/Siemens/Anchor/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge. |
| 70 | Supplying, installation, of exhaust fan of 300 mm sweep(Make-Havells/almonard/Anchor/Panasonic/Usha or equievalantof exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. |
| 71 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Ushaor equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge |
| 72 | Supply and fixing of modularType fan regulator (Make-Roma/Legrand or Eq.) |
| 73 | Supply and fixing 10 Watt LED B.H fittings (Make-Havells/ Cona/ Panasonic or eq model) |
| 74 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt complete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. (Similar to Panasonic Model No. PBTM08208 orsimilar modelofHavells/ Philips/ Crompton/Bajaj or equievalant reputed make & model A catagory ISI marked as approved.). |
| 75 | S/F of 45wattLEDStreet Light New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic drive including G.I bracket ,M.S clamp ,Anchor fastner withall acccessories and connection.(Make:Philips/Havells/Crompton or eq. model) |
| 76 | Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 77 | Providing and fixing 6 SWG G.I. wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required. |
| 78 | S/F of PVC T/C U.Balmn. Wire with No.10/12SWG G.I supporting wire6 mm2 Almn wire |
| 79 | PH work--Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipesconforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brassthreaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Jointsall complete as per specification and direction of the Engineer in charge. 20mm dia C- PVC pipeIn ground floor |
| 80 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge.25mm dia PVC ASTM pipe (sch-80) |
| 81 | 32mm dia PVC ASTM pipe (sch-80) |
| 82 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mmthick wall |
| 83 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of theEngineer in charge.In ground floor |
| 84 | Supplying allmaterials, labour, T&P and cutting grooves in pucca floors and walls for takingGI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor |
| 85 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP bib cock CON-CHR-037KN(Jaquarmake ) |
| 86 | 15 mm dia CP two way Bib cock(Con-CHR-041KN Jaquar make) |
| 87 | 15mm dia CP Health foucet (ALD-CHR-573 Jaquar make) |
| 88 | 15mm dia C.P. wall mixture 3-in-one System (Jaquar make with provision for over head Shower FLR-CHR- 5281N |
| 89 | 15mm dia C.P Telephonic Shower |
| 90 | 15 mm dia CP Long bodyBib cock( CON-CHR-107KN Jaquar make ) |
| 91 | 15mm dia CP angle stop cock(CON-CHR-053KN Jaquar ) Make |
| 92 | 20mm dia CP concealed stop cock(CON-CHR-071 Jaquar)Make |
| 93 | 25mm dia CPVCfull way valve (Ashirvad Make) |
| 94 | 15mm dia CP flange |
| 95 | 15mm dia CP extension piece |
| 96 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge 15mm dia CP revolving shower ( Plaza make ) |
| 97 | Supplying all materials, labour, T&P and fitting and fixing10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bendSlimline white |
| 98 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in chargeOn the roof of Ground floor 1000litre capacity water storage tanks (sintex/oriplast/Supreem) make |
| 99 | 1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm OPEN well submersible pump(Kirloskar make) |
| 100 | 2.50sqmm flat cable |
| 101 | 20mm dia rigid UPVC pipes |
| 102 | Labour charges for lowering including transportation |
| 103 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricantby non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor 110mm dia U-PVC SWR pipe(Ashirbad / Supreeme ) |
| 104 | 110mm U-PVC door crosstee |
| 105 | 110mm U-PVC door tee |
| 106 | 110mm U-PVC door bend |
| 107 | 110mm U-PVC plain bend |
| 108 | 110mm U-PVC Plain tee |
| 109 | 110mm dia U-PVC \"P\" trap |
| 110 | 110mm dia U-PVC Plain Shoe Bend |
| 111 | 110mm dia U-PVC offset with out ear |
| 112 | 110mm dia U-PVC cowl |
| 113 | 125mm dia CP grating |
| 114 | 110mm dia PVC SWR Clamp/Clip. |
| 115 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all completeas per PH specification and direction of the Engineer in charge250mm to 375mmthick wall |
| 116 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 117 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge 580mm size Orissa pan (Parryware / Nycer make ) |
| 118 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.European water closet with ‘S’ trap plain (Parryware / Nycer make ) |
| 119 | 600x450x250 mm stainless Steelkitchen sink-glossy-IS: 13983-1994(jayna make ) |
| 120 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste,etc all complete as per specification and direction of the Engineer in charge.550mmx400mm size wash hand basin with porcelain pedestalParryware/ Hind ware /Neyser make ) |
| 121 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge .600mmx450mm size B.E mirror x minimum 5mm thick(Alpina make ) |
| 122 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeAcrylicglass shelf with CP guard rails |
| 123 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 124 | C.P. Ring Towel Rail |
| 125 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holderCP soap holder |
| 126 | Supplying all materials labour T&P and filling in foundation and plinth with sandwellwatered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction ofEngineer in charge In ground floor |
| 127 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor |
| 128 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor |
| 129 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 130 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. 30 cm. x 30 cm. Kajaria / Somany / Johnson to be pree approved .In ground floor |
| 131 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.45cm. x 30cm. Kajaria / Somany / Johnson to be pree approved .In ground floor In ground floor |
| 132 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make) |
| 133 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all completeas per approved drawing,specification and direction of the Engineer in charge.Pure Chill 120 PSS UV |
| 134 | EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia |
| 135 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm |
| 136 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ashbrickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inside size 760mmx760mmx460mm |
| 137 | ---- do --- addl depth of 0.15m upto 0.90m |
| 138 | R.C.P.C.Manhole Cover |
| 139 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.20m dia x 2.00m deep soakway pit |
| 140 | Construction of 30 users septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge. |
| 141 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 142 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 143 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 144 | Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 145 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 146 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 147 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor androofslabs |
| 148 | Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 149 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 150 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm UPVCTee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge110mm dia UPVC Tee |
| 151 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 152 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 153 | (Sinking of 150mm size tube well through hand boring( water jet) method)Suplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge |
| 154 | Supplying all labour, T&P and transporting the boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement, bentinite and gravels etc to the worksite including loading and unloading etc all complete as per direction of the Engineer in charge. |
| 155 | Supplying all labours, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kind of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets ( whenever required) etc and withdrawing the boring pipes, washing and keeping the bore logging if required all complete as per direction of Engineer in chargeDrilling pilot bore from 0 to 360 metres |
| 156 | Supplying all labour, T&P and reaming the pilot bore to the following sizes and depth without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction off Engineer in charge.Reaming 100mm to 150mm dia from 0-360 mtr |
| 157 | Reaming 150mm to 200mm dia from 0-360 mtr |
| 158 | Reaming 200mm to 300mm dia from 0-360 mtr |
| 159 | Supplyimg all labour, T&P and jointing materials & lowering the 300mm dia top casing pipes into the position and removing the same after all complete as per direction of Engineer in chargeFrom 0-360 mtr |
| 160 | Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge150mm dia PVC casing pipe from 0 to 360 metres |
| 161 | Cost of 150 mm dia PVC ASTM pipe(sch-80) |
| 162 | Cost of 150mm dia Slott Cutting |
| 163 | 150 mm dia C.I.end/top cutter plug |
| 164 | Cost & Conveyance of bentonite powder |
| 165 | Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction off the Engineer in charge.Labour charges |
| 166 | Cost and Conveyance of gravel |
| 167 | Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack all complete as per the direction of the Engineer in charge.Labour charges |
| 168 | Cost and Conveyance of sand |
| 169 | Supplying all labour, T&P including developing the tube well with compressor ( supplied by contractor ) continuiously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour as per direction of the Engineer in charge.Labour charges |
| 170 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm |
| 171 | 1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm(Horizontal for sump) |
| 172 | DOL Control panel |
| 173 | 40mm dia steel short piece |
| 174 | Well cap |
| 175 | 50mm size CI bracket |
| 176 | 2.50sqmm flat cable |
| 177 | 20mm dia rigid UPVC pipes |
| 178 | Steel rope with cover |
| 179 | 32mm dia HDPE pipe |
| 180 | Labour charges for lowering including transportation |
| 181 | Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 760x760x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Bore well protectionchamber |
| 182 | Construction of Under ground RCC water storageSump Inside Size ( 2.00m x 1.50m x 2.00m )tank.Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge. |
| 183 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 184 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor |
| 185 | Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge |
| 186 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 187 | RCC beam,Column, girders and bressmer etc |
| 188 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 189 | Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 190 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside/outside) |
| 191 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) |
| 192 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 193 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
AI Tender Summary
Tender Timeline
Feb 04, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 15, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender