Military Engineer Services-MES has published Repair/Maintenance And Restringing Of Lt Distribution Over Head Lines, Replacement Of Unserviceable Acsr Conductor, Unsv Poles, Lt Feeder Pillar Box, Apfc Panel, Voltage Stabilizer, Ug Cable, Earthing And Other Allied Misc Connected Work At Zone ‘A’ Jalip. Submission Date for this Tender is 28-02-2023. Electrification Work Tenders in barmer Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Feb-2023 | Corrigendum | BOQ | 21-02-2023 |
| 2 | 21-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-02-2023 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches n. exc 1.5m wide and not e. 1.5m in depth for foundation of poles, laying UG cables, etc and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point in soft / loose soil complete all as specified and directed. |
| 3 | Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed. |
| 4 | M&L for boring/drilling by machines/manual horizontally under the road in any type of soil without cuttiing/disturbing the existing road and inserting GI pipe of any size for drawing the cable complete all as specified.(GI pipe shall be measured and paid seperately. |
| 5 | Material and labour for sand cushioning for under ground cables, spread in trenches, river sand including cleaning, spreading levelling, punning for laying/cushioning of cable all directed. with layer of 8 cm deep before laying cable and 15 cm depth after laying and stretching the cable complete all directed.Note: For the Purpose of payment puned thickness shall be measured. |
| 6 | Material & labour for supplying and laying un-reinforced precast concrete cable cover , class LV, type 1 flat. Size 250 mmX150 mmX40 mm complete all as specified and directed. |
| 7 | M&L for galvanised steel tube 50mm bore (light grade) layingin road/drain crossingfor cable protection pipe complete all as specified and directed. |
| 8 | M&L for galvanised steel tube 50mm bore (light grade) fixed to pole/wall/floorfor cable protection pipe includingclamp of MS flat of size 50x5mm and nut, bolt & washers of size 50x12mm for clamping of cable protection pipe with wall/pole as where required complete all as specified and directed. |
| 9 | M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling & mass concrete for sub base of poles complete all as specified and directed. |
| 10 | M&L cement concrete 1:3:6, type C-2, (using 40 mm graded stone aggregate) for foundation of poles, stays, etc including form work as required/ordered complete all as specified and directed. |
| 11 | M&L cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping of poles, padestal, etc including necessary form work etc complete all as specified and directed. |
| 12 | Excavation in post holes (or similar holes) each not exc 0.5 cum getting out , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed. |
| 13 | Supply and laying, XLPE insulated, armoured, heavy duty electric UG cables withaluminium conductor 1100 volts grade complete including porviding lugs as required complete all as specified and directed for cross-sectional area 10 sqmm 2 core. |
| 14 | All as per item No 13above but of size 10 Sqmm, 4 core |
| 15 | All as per item No 13above but of size 16 Sqmm, 2 core |
| 16 | All as per item No 13above but of size 16 Sqmm, 4 core |
| 17 | All as per item No 13above but of size 25 Sqmm, 3 1/2 core |
| 18 | All as per item No 13above but of size 35 Sqmm, 3 1/2 core |
| 19 | All as per item No 13above but of size 50 sqmm, 3 1/2 core |
| 20 | All as per item No 13above but of size 70 sqmm, 3 1/2 core |
| 21 | All as per item No 13above but of size 95 sqmm, 3 1/2 core |
| 22 | All as per item No 13above but of size 120 sqmm, 3 1/2 core |
| 23 | All as per item No 13above but of size 150 sqmm, 3 1/2 core |
| 24 | Dismantling/uprooting of LT unserviceable pre-stressed concrete/steel poles of any size and length including taking out dismantled portion of poles embeded in concrete after necessary demolition ofconcrete foundation and disposal there of complete all as specified and directed. |
| 25 | M & L for Prestressed concrete pole, 9.0 metres long, 102 mm x 152 mm at top and 102mm x 289 mm at bottom,class 10 complete all as specified and directed. |
| 26 | Dismantling cross arms of MS channel or angle sections etc. and keeping serviceable materials in safe custody for re-use and/or unserviceable materials removing from the site complete all as specified and directed |
| 27 | Fixing only serviceable cross arm, MS Channel, angle section obtained from item No 28 above after painting with one coat of aluminium paint including preparation of old steel surfaces complete all as specified and directed. |
| 28 | M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections, including nuts, bots, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat (red oxide, zine chrome primer), one under coat and one finishing coat of aluminium paint including preparation of surfaces complete all as specified and directed. |
| 29 | Dismantling of ACSRconductors or disturbed span including line spacer and keeping serviceable materials in safe custody for re-use and unserviceable materials removing from the site complete all as specified and directed. |
| 30 | Fixing only by re-straining, tightening of ACSR conductors of any size/type on LT poles including necessary new aluminium binding wire for fixing with insulator/PVC sleeves for jumper etc as required complete all as specified and directed. (Note : Serviceable ACSR conductors shall be obtained from item No.29 above). |
| 31 | M&L for aluminium conductor steel reinforced (ACSR)on LT poles including straining, binding with insulators with aluminium binding wire with insulator as in OH conductor, providing PVC sleeves for jumpers complete all specified and directed. |
| 32 | Dismantlinginsulators of any type and any size and keeping serviceable materials in safe custody for re-use andremoving unserviceable materials from the site complete all as specified and directed. |
| 33 | Fixing only serviceable pin type porcelain, vitreous, (white/brown or green) insulator for 1100 volts grade of any type obtained from item No 32 above. |
| 34 | Fixing only serviceable shackle type porcelain, vitreous (white / brown or green) insulator of any size and shape for 1100 Volts grade obtained from item No 32 above. |
| 35 | S&F pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts gradecomplete all as specified and directed. |
| 36 | S&F shackle type, porcelain, vitreous white, brown or green insulator including galvanised mild steel straps of size 31 x 3 mm, 12 mm dia insulator bolts, nuts and washers for working pressure 1100 volts of size 75 mm height, 90 mm dia complete all as specified and directed. |
| 37 | Dismantling LT Stay assembly, of any size and unserviceable materials removing from the Site(s), complete all as specified and directed. a) Unserviceable Stay assembly shall be taken off/dismantled at Ground Level and making good disturbed ground surface. b)Rate is inclusive of necessary earthwork for demolition of cement concrete complete. |
| 38 | M&L Stay assembly for LT complete with accessories as shown in Electrical plate No. 1 of MES schedule Part- I, 16 mm dia stay rod,7/3.15 mm galvanised stay strand complete all as specified and directed.(Note :Loop insulator, stay clamps, excavation/ earthwork and cement concrete shall be measured and paid for separately under relevant items of this Schedule). |
| 39 | S&F loop type insulators vitreous porcelainwhite / brown or green small size with overall dimensions 65x90 mm clearance of hole 16 mm dia complete all as specified and directed. |
| 40 | Dismantling earth wire of any size/dia, guarding cradle of disturbed span and keepingserviceable materialsin safe custody for re-use and removing unserviceable materials from the site complete all as specified and directed. |
| 41 | Fixing only serviceable GI wire 3.15 mm or 4 mm dia martial obtained from item No 40 above complete all as specified and directed. |
| 42 | M&L for cradles, hexagonal / rectangular, fabricated or continuous earth wire with galvanised steel wire 3.15 mm or 4 mm dia complete all as specified and directed. |
| 43 | S&F PVC fibre separator for LT line 1100 volt OH conductor 3/4 wire system for maintaining horizontal spacing of conductor complete with nut & bolt minimum two nos in a span complete all as specified and directed. |
| 44 | Trimming of tree branches around the LT /HTOH conductor, pole & stay(not less than 3 metre) to clear the over head lines including cleaning of birdnest, creepers on poles and stays etc complete as required including removing and disposed off from the site directed. Note : The quoted shall deemed to be inclusive of provision of periodically cleaning/cutting etc including disposal there-off and "span" will be measured & paid only once in entire contract period. |
| 45 | M & L earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less then 2.25m deep bellow ground level) with top edge of the plate not less then 1.5m deep below normal ground level connected to galvanised iron strip of 32 x 6mm earth lead by means of bolt, nuts, washers of galvanised steelearth strip protected by and including GI pipe 40mm dia bore (light grade) and conncted to main test point directed and including concrete pit in PCC(1:3:6)type C-1 precast RCC(1:1.5:3)type A-1 cover slab 54 x 5 cm reinforced with 4mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8mm dia TMT bar embedded in precast cover slab funnel wire mens 20mm bore GI pipe (medium grade) for watering charcoal and salt in altemate layers, including necessary excavation and earth work in any type of soil complete all as shown on electrical plate No3 of SSR part-I complete all as specified. |
| 46 | Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in groundpreferably vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanised iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe , including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size, charcoal and salt in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing on completioncomplete all as specified and directed. |
| 47 | S&F TPN copper bus bar box, outdoor type of 200 A capacitymounted on porcelain bridge insulator for one incoming cable and 4 out going cable, housing in sheet metal enclosure of MS sheet 3.0 mm thick CRCA sheet and angle iron 40x40x6 mm frame, painted with two coatsincluding arrangement for cable gland for incoming and outgoing cables, locking arrangement, suitable foundation/platform for mounting the FPB with space for and including the following switch gears:(a) MCCB 100 A FP, 10 KA (for incoming control) |
| 48 | Preparation of old painted surface above the planting depth and PCC coping of steel tubular LT pole of09.00 metre length including MS clamps ,cable protection pipe bracket fittedwith street light fittings etc by scraping with steel wire brush and applying two coats, of aluminium paint to external surface of poles MS cross arms MS clamp, cable protection pipe etc to give even shade including Zebra colour of painting from 1.5 mtr height from the top of coping/ bottom of pole as per site condition and numbering of poles complete all as specified and directed. Note:Zebra colour will be applied by synthetic enamel paint of black/yellow colour as approved in alternate layer of 30 cm height of each layer. |
| 49 | Preparation of old painted surfaces and removing dust and other deposited material by scraping from LT PCC polesof09.00 metre length, cross arms brckets and applying 2 coats of aluminium paint to all steel surfaces, including MS clamps ,cable protection pipe bracket fittedwith street light fittings etcincluding Zebra colour of painting upto 1.5 mtr height from the top of coping/ bottom of pole as per site condition and numbering of poles complete all as specified and directed |
| 50 | Supply, jointing and testing cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25-50 Sqmmcomplete all as specified and directed. |
| 51 | Supply, jointing and testing cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70-150 Sqmm complete all as specified and directed. |
| 52 | Supply, jointing and testing cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25-50 Sqmmcomplete all as specified and directed. |
| 53 | Supply, jointing and testing cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70-150 Sqmmcomplete all as specified and directed. |
| 54 | S&F MCCB,415 volts, 250 Amp,breaking capacity 25 KA, 4 pole,including taking down existing old/unserviceable MCCB from LT panel /APFC Panelboard after carefully disconnecting the electric connection complete all as specified and directed |
| 55 | S&F MCCB, 415 volts, 200 Amp,breaking capacity 25 KA,4 pole,including taking down existing old/unserviceable MCCB from LT panel /APFC Panelboard after carefully disconnecting the electric connection complete all as specified and directed |
| 56 | S&F MCCB, 415 volts, 160 Amp,breaking capacity 16 KA, 4 pole including taking down existing old/unserviceable MCCB from LT panel /APFC Panelboard after carefully disconnecting the electric connection complete all as specified and directed |
| 57 | S&F MCCB, 125 Amp, 415 volts, breaking capacity 16 KA, 4 pole,including taking down existing old/unserviceable MCCB from LT panel /APFC Panelboard after carefully disconnecting the electric connection complete all as specified and directed |
| 58 | S&F MCCB, 100 Amp, 415 volts, breaking capacity 10 KA, 4 pole,including taking down existing old/unserviceable MCCB from LT panel /APFC Panelboard after carefully disconnecting the electric connection complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
