Tender For Provision Of Road And Special Repair To Hard Standing In Technical Area At Khaltsi And Special Repair To Bldg No T-20 And T-41 At Biamah Under Age B/R-Ii Under Ge Khumbathang
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Feb 2023
0 days left
EMD
13770
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khumbathang → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Road And Special Repair To Hard Standing In Technical Area At Khaltsi And Special Repair To Bldg No T-20 And T-41 At Biamah Under Age B / R-Ii Under Ge Khumbathang
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-Feb-2023 |
| 2 | 20-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Feb-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete(unreinforced) in ground floors and pavingsof any description and in any position not otherwise provided for, complete all as specified |
| 2 | M&L for cement concrete type A-11:1.5:3 (20 mm graded aggregate) as in pavings, floor, mass concrete etc, complete all as specified and directed. |
| 3 | M&L for finishing surface of concrete roads, pavements, by brooming complete all as specified. |
| 4 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’,thickness of concrete slab 150 mm, etc. complete all as specified |
| 5 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade \"A\" complete all as specified |
| 6 | Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings such as switches, ceiling reose, pendents, regulator sockets etc, removing material from site and making good the disturbed surfaces of wall/floor/roof all as specified & directed by Engr-in-charge. |
| 7 | Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories andPVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:-(a) One light point/fan point/buzzer point Exhaust fan point controlled by one switch. |
| 8 | (b) One socket outlet 5 Amp on independent board complete. |
| 9 | (c) One socket outlet 5 Amp on same board complete. |
| 10 | Description all as per item No.8 here-in-before but with cable conductor 2.5 sq mm (Nominal size) & earth wire of 1.5 sqmm for socket outlet 15 Amp on independent board complete |
| 11 | Supply and Fixing switch piano flush button type 5 Amp single pole one way (ISI marked) complete all as specified and dirtected. |
| 12 | Supply and Fixing switch piano flush button type 15 Amp single pole one way (ISI marked) complete all as specified and dirtected. |
| 13 | Supply and Fixing socket out let multipurpose three pin 5 Amp flush type complete all as specified and directed. |
| 14 | Supply and Fixing socket outlet2 in 1, three pin 5 Amp and 5 pin15 Amp flush type (multi purpose) ISI marked complete all as specified and directed. |
| 15 | Supply and Fixing ceiling rose three terminal pvc/polycarbonate, isolated body complete all as specified and directed. |
| 16 | Supply and Fixing lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fitting (angle /plain) complete all as specified and directed. |
| 17 | S&F in repair E-LitE LEDPride plus LED 9Wfor Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack., 230volts, 50 Hz including making necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose/PVC connector to light fittings complete all as specified and directed. |
| 18 | S & Fpressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts , 8 way complete all as specified and directed. |
| 19 | S & Fpressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts , 4 way complete all as specified and directed. |
| 20 | Supply and fixing MCB 40 Amp SPN 240 volt AC supplyrupturing capacity not less than 10 KA complete all as specified and directed. |
| 21 | Supply and fixing MCB 6 to 40 Amp SP 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed. |
| 22 | S&F 300 mm sweep exhaust fan, AC, single phase, 230volt, with louvercomplete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for sand cushioning to under ground cables with a layer of sand 8cm thick before laying the cable and 15cm thick after laying the cable, as specified in clause 19.75 of SSR Part-I, 2009 complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L factory made, un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250mm X150mm X 40mm, complete all as specified and directed by Engineer-in-Charge. |
| 25 | M & L for GI pipe light grade 40 mm dia galvanised with all fitting to be laid in trench/wall/pole for the protection of cable under road/poles/wall/floor etc complete and PCC path complete all as directed by Engineer-in-chargeincluding fixing clamps etc. with pole or passing through road/floor etc complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectionstwin core cable flat or circular 6 sqmm complete all as specified anddirected. |
| 27 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections 3.5 core cable flat or circular 10 sqmm complete all as specified anddirected. |
| 28 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections 3.5 core cable flat or circular 16 sqmm complete all as specified anddirected. |
| 29 | M&L earthing complete with galvanised steel earth plate electrode 600mm X 600mm X 6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtrs deep below normal ground level) with top edge of earth plate at a depth not less than 1.50 metre below the normal ground level,connected to galvanised earth lead wire of 4.00mm dia as earth by means of nuts, bolts, washers, checknuts of iron or steel including PCC pits in cement concrete 1:2:4, type B-1 (using 20mm graded mechanically crushed stone aggregates) and RCC cover in cement concrete 1:2:4, type B-1(using 20mm graded mechanically crushed stone aggregates) and necessary earth work in any type of soil, light grade GI watering pipe 20mm bore with funnel and wire mesh and 15 mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate, complete all as specified and shown electric plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Engineer-in-Charge. |
| 30 | Dedcuct Credit for Demolished/Dismantled material Rs (-) 12,675.00(Minus) as listed in Schedule \"A\" Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the \"Contract Sum\". |
AI Tender Summary
Tender Timeline
Feb 20, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 20, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Feb 25, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender