Tender For Infrastructural Development Of Nifam Fisheries Training Centre, East Kadungallur- Electrical Works, Interior Furnishing Works, Civil And Plumbing Works Etc..
Tender Value
20.02 Lakhs
Estimated cost
Bid Submission
07 Mar 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Infrastructural Development Of Nifam Fisheries Training Centre, East Kadungallur- Electrical Works, Interior Furnishing Works, Civil And Plumbing Works Etc.. The Scope Of The Proposed Work Include Electrical Works In Large Training Hall , Rewiring Of Hostel Rooms Etc, Interior Furnishing Works At Dining Area, Living Area, Hostel Rooms Etc, Civil Works Of Lift Area, Plumbing Works Of Toilets Etc
BOQ
| Sl. No. | Item Description |
| 1 | Electrical works in large training hall and Hostel rooms |
| 2 | Engaging labour : Wireman |
| 3 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A |
| 4 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulatedcopper conductor, single core cable in surface/ recessed steel conduit as required4 X 2.5 sq. mm + 2 X2.5 sq. mm earth wire |
| 5 | Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm withspecials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB\"s shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories ). Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. |
| 6 | Supply conveyance, installation, testing and commissioni ng the 20W LED tubeset directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed und copper conductor flex wire or extending the original wiring and giving connections as required etc. all complete. |
| 7 | Supply and fixing bulb holder LED bulb |
| 8 | Supply and fixing 9 W LED bulb |
| 9 | Supply, conveyance, installation, testing and commissioni ng of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C |
| 10 | Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch |
| 11 | Supplying and laying cables for connecting such as Camera, Computer, TV, Projector, Sound system, etc. |
| 12 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 13 | Supply conveyance, installation, testing and commissioning the LED ceiling light fitting with allaccessories and lamps directly on false ceiling and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required |
| 14 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required. |
| 15 | Interior furnishing of Dining area |
| 16 | Supplying 8 seater dining table in Teak wood finish with 6x4 glass top including the cost of 8 nos chairs,carriage and conveyance charges, etc . |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 18 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangem ent of approved quality and colour, weighing not less than 88 gms |
| 19 | Interior furnishing of living area, large and mini training hall |
| 20 | Supplying 5 seater sofa Settee in Teak wood including carriage, conveyance charges, etc. |
| 21 | Supplying wooden book shelf with glass door in particle board of size 90x40x210cm including carriage,conveyance charges, etc. |
| 22 | Supplying and fixing 43 inch smart LED TV, (SONY 108 cm KD-43X75K UHD/4K) including conveyancecharge, fitting charge etc |
| 23 | Supplying Jawa model push back, netted back , metal base Revolving chair including carriage andconveyance charges. etc, |
| 24 | Supplying and fixing 65 inch smart TV (Sony 163.9 cm KD-65X75K UHD/4K) including conveyancecharge, fitting charge etc |
| 25 | Supplying i5 12th gen 15.6 inch Laptop, 8 GB RAM with bag including conveyance charge |
| 26 | Supplying and conveyancing PA Amplifier Set 50W (Ahuja BTA - 880) including two number wirelessMicrophone and PA Speaker stand (STA - 150) |
| 27 | Supplying Dual PA UHF Wireless Microphone (Ahuja AWM - 700U2) |
| 28 | Supplying and installation of CCTV surveillance and online monitoring including cost of 4 cameras, 8Channel DVR, 1 TB hard disk, SMPS, installation charges, cabling charges, 4 U rack, 32 inch TV pannel,etc. |
| 29 | Supplying and fixing projector (Epson EB-W49) and Sealing Mound Stand including charge for cablesand conveyance |
| 30 | Interior Furnishing for Hostel rooms |
| 31 | Supplying plastic chair including carriage and conveyance charges. |
| 32 | Supplying wooden study table with one draw of size 4x2 in Teak wood including carriage, conveyancecharges, etc. |
| 33 | Supplying Double door wardrobe of size 190x90x45cm in multiwood including carriage, conveyancecharge, etc. |
| 34 | Repairing and maintenance to chair including the material cost of cushion, cloth, etc. (cushion size 400mm x 400mm) |
| 35 | Plumbing works and civil works including lift area |
| 36 | Engaging labour: coolie |
| 37 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete asper direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall |
| 38 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 |
| 39 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall |
| 40 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walletc. 25 mm pipe 10kgf /cm2 |
| 41 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall |
| 42 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walletc. 50 mm pipe 6 kgf/cm2 |
| 43 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall |
| 44 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc.63 mm pipe 6 Kgf/cm2 |
| 45 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall |
| 46 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc.110 mm pipe 6kgf/cm2 |
| 47 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 63 mm dia Elbow |
| 48 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement -63 dia 45 degree Elbow |
| 49 | Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow |
| 50 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 63 mm dia Bend |
| 51 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVCsolvent cement - 63x63x63 mm dia Tee |
| 52 | Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVCsolvent cement-63 mm dia Socket /coupling |
| 53 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 110 mm dia Elbow |
| 54 | Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 110 mm dia 45 degree Elbow |
| 55 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement-110 mm dia Door Elbow |
| 56 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement- 110 mm dia Bend |
| 57 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVCsolvent cement 110x110x110 mm dia Tee |
| 58 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVCsolvent cement - 110 mm dia Socket/ coupling |
| 59 | Providing and fixing 110 mm dia floor trap |
| 60 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting andmaking good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seatand lid |
| 61 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever)conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - coloured |
| 62 | Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:Cloured (other thanblack & white) solid plastic seat with lid |
| 63 | Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc.complete as per the direction of site engineer-in-charge |
| 64 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps |
| 65 | Supplying and fixing 15 mm CP brass pillar tap |
| 66 | Supplying and fixing stainless steel long body tap |
| 67 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter |
| 68 | Supplying and fixing stainless steel angle cock |
| 69 | Supplying and fitting CP gratings |
| 70 | Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge |
| 71 | Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials andlabour charges etc complete as per the direction of site Engineer-in-charge |
| 72 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangularshape 453x357 mm |
| 73 | Supplying and fixing brass water sprinkler irrigation system of pressure 70 psi, 142m/H speed and360deg rotation |
| 74 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix) |
| 75 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) |
| 76 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40nominal size) |
| 77 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the wallscomplete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar1:4 ( 1 cement : fine sand) |
| 78 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organiccoated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /groutingand finishing complete as per direction of Engineer-in-charge.Size of Tile 500x500 mm |
| 79 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by themanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), includingpointing the joints with white cement and matching pigment etc., complete. |
| 80 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 81 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 m lead as per direction of Engineer-in-Charge:In cement mortar |
| 82 | Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposalof unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge |
| 83 | Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest availablesize confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 84 | Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 85 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,girders bressumers and cantilevers |
| 86 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 87 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 88 | Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining ( veneer work),backing filled with a grout of 12 mm thick average in cement mortar 1:3 ( 1 cement : 3 coarse sand),including pointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with an admixture ofpigment to match the marble shade ( To be secured to the backing by means of cramps, which shall bepaid for separately).Area of slab over 0.50 sqm |
| 89 | Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete |
| 90 | Providing and laying Galvalume trafford sheet 0.5 mm or nearest size over the truss work including positioning with corrosion resistant self drilling screws including all materials, labour, conveyence etc.complete (excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required) |
AI Tender Summary
Tender Timeline
Jan 31, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender