Tender For Civil Works Extension And Construction Of 1St Floor Of Ps Guest House Of Nanoor Dev Block Under Head Msdp
Tender Value
11.50 Lakhs
Estimated cost
Bid Submission
10 Feb 2023
0 days left
EMD
28767
Bank guarantee accepted
Document Fee
3500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nanoor → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Civil Works Extension And Construction Of 1St Floor Of Ps Guest House Of Nanoor Dev Block Under Head Msdp
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drain in all sorts of soils (including mixed soil) the item includes necessary trimming the side of trenches leveling dressing and ramming the bottom, bailing out water as required complete. Depth of excavationupto 1500 mm |
| 2 | Filling in foundation or plinth by fine sand in layers not exceeding 1.5mm salutation with water ramming complete including the cost of supply of sand |
| 3 | Single layer brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints. |
| 4 | Cement concrete with graded stone ballast(40mm size excluding shuttering) in ground floor (1:3:6) |
| 5 | Ordinary cement concrete with M20 grade (1:1.5:3) with graded stone chips 20mm down excluding shuttering and reinforcement at ground floor |
| 6 | 1st Floor col |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved props of slab beam column lintel curve or straight including fitting fixing and striking out after completion of works with Props |
| 8 | 1st Floor col |
| 9 | 25mm – 30mm thick shuttering without prop in foundation G.F |
| 10 | 25mm – 30mm thick shuttering without prop in foundation FF |
| 11 | Brick work with 1st class bricks in cement mortar 6:1(i) foundation and plinth |
| 12 | Brick work with 1st class bricks in cement mortar 6:1(ii) in superstructure |
| 13 | 1st floor |
| 14 | 125mm thick brick work with 1:4 mortar |
| 15 | Plaster (in wall, floor etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, noising and drip courses where i)With 4:1 cement mortar 10mm thick |
| 16 | FF |
| 17 | Plaster (in wall, floor etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, noising and drip courses whereii)With 6:1 cement mortar 20mm thick |
| 18 | 1st floor |
| 19 | Plaster (in wall, floor etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, noising and drip courses where iii) With 1:6 cement mortar 15mm thick |
| 20 | 1st floor |
| 21 | Neat cement punning on plaster surface GF |
| 22 | 1st floor |
| 23 | Reinforcement for reinforced concrete work in all sorts of structure in/c distribution bars, stirrups,binders etc. in/c supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. GF |
| 24 | FF |
| 25 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete |
| 26 | MS or WI ornamental grill of approved design joints, continuously welded with MS, WI flats and bars for windows railing etc. fitted and fixed withscrews and lugs in ground floor. Grill weighing @ 16Kg. /M2 |
| 27 | Artificial stone in floor, dado, stair case etc. with cement conc. (4:2:1) with stone chips laid in panels as directed with topping made with ordinary or white cement and marble dust in proportion 2:1:1 in/c smooth finishing and rounding off corners and in/c application of cement sluvy before fore flooring works using cement @ 1.75Kg/Sqm all complete in/c all materials and labour (25mm thick) |
| 28 | FF |
| 29 | Wood work in door and window frame fitted and fixed complete including a protecting court of painting at the contact surface of the framesishu ,gamar) |
| 30 | Panel shutter for door and window as per design including fitting and fixing the same in position but excluding the of hinge and other materials. 35mm thick panel shutter with 19mm thick panel (with Sishu/Gamar wood) FF |
| 31 | Ms clamp for fitting fixing door and window frame ………. Fixed in cement concrete with stone chips 1:2:4 fitted and fixed complete as per direction. 40mmX6mm X 200mm length |
| 32 | Ms clamp for fitting fixing door and window frame ………. Fixed in cement concrete with stone chips 1:2:4 fitted and fixed complete as per direction. (c) 40mm X 6mm, 125mm Length |
| 33 | Iron but hinges of approved quality fitted and fixed with steel screw with ISI mark100X50X1.25 mm Door |
| 34 | Iron but hinges of approved quality fitted and fixed with steel screw with ISI markiii) 75mm. X 40mm. X 1.12mm. Window |
| 35 | Iron socket bolt of approved quality fitted and fixed complete 225mm long X 10mm dia boltDoor |
| 36 | Iron socket bolt of approved quality fitted and fixed complete (c) 150mm long x 10mm dia bolt. Window |
| 37 | Iron hasp bolt of approved quality fitted fixed complete with 16mm dia rod with centre bolt and round fitting 250mm long |
| 38 | Aluminum ‘D’ type door handle of approved quality fitted and fixed complete 100mmX10mm Door |
| 39 | Supplying fitting fixing hinge cleat (sal) with new hinge i) With 75mm iron butt hinge |
| 40 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. |
| 41 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular \"L\" shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete. |
| 42 | Supplying, fitting fixingwindows and ventilators withor without integrated grills conformingto IS 1038-1975 and manufactured from rolled steel sections connforming to IS 7452-1974with non-friction projecting type,box type hinge , glazing clips, lugs locking brackets ,handle plate etc,inc.hoisting in position straightening if required , friction lugs In cement concrete 4:2:1 with stone chips 20mm down size cutting holes and mending good damages to match with existing surface complete in all respects. excluding glazing. Openable steel windows as per IS sizes with side hung shutters and horrizontal glazing bars with / without fixed type ventilators |
| 43 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.With Polymerised Adhesive and Epoxy grout pointingincludingspacer-2mm(When Tiles are laid over existing hard ready surface) (b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick] |
| 44 | Supplying fitting fxing Anglo Indian W/C in white glaze vitrious chinaware of approved make complete in position with necessary bolt nut etc. with P Trap |
| 45 | Supplying fitting and fixing 10 ltr. PVC low down cistern conforming to I.S. specification with PVC fitting complete |
| 46 | Supply UPVC Pipes(B-types)& fittings conforming to IS 13592-1992110mm dia |
| 47 | UPVC Fittings 110mm dia Plain Tee |
| 48 | UPVC Fittings110mm dia Plain \"Y\" |
| 49 | UPVC Fittings 110 mm dia Bend 87.5 degree |
| 50 | Pipe Clip 110mm dia |
| 51 | Wash basin vitreous china of approved make …………. In position on 75X75X75mm wood block and CI brackets …….. painting of CI brackets 550X400mm size |
| 52 | Supplying, fitting fixing approved brand 32mm dia PVC waste pipe with PVC coupling at one end. Fitting fixing with necessary complete.900mm long |
| 53 | Supplying, fitting fixing approved brandPVC Connectorwhite flexible with both ends coupling . Fitting fixing with necessary complete.15mm dia 600mm long |
| 54 | Supplying fitting and fixing PVCpipeswith all necessary accessories specials viz socket bend, tee, union, cross, elbow, nipple, long screw, reducing socket, tee, short piece etc. fitted with holder bats clamps ……….. all complete i. 25mm dia medium pipe |
| 55 | ii. 20mm dia medium pipe |
| 56 | Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). 15mm |
| 57 | Supplying fitting and fixing towel rail with two brackets(a) C.P. over brass25mm dia 600mm long |
| 58 | Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 59 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats |
| 60 | 1st Floor |
| 61 | Decorative cement base paint to external surface two coats including one coat of cement primer outer wall |
| 62 | 1st floor |
| 63 | Priming one coat on steel or other metal surface with synthetic enamel/oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 64 | on wooden surface |
| 65 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using approve putty etc. on the surface.On steel surface with super gloss (hi- gloss) two coats with any shape except white. |
| 66 | i)on wooden surface with super gloss (hi- gloss) Two coats with any shade except white |
| 67 | Wiring in 1.1 KV grade single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precisionmake) incl. necy. PVC clips, fittings etc. (Presto Plast) (c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) P-E-11 I-1 |
| 68 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface]Avg. run 6mtr. P-E-11 I- 2 |
| 69 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Havells 6-32 amp P-D6 I |
| 70 | Suppling & fixing LEDTube light set with all fittings and accesseries comp.(PHILIPS / HAVELLS make) 20W |
| 71 | Supplying, fitting and fixing electornic regulator for fan on board with all accessories as per direction of EIC P-E-6 I-18(b) |
| 72 | Suppllying, fitting fixing ceiling fan as per approved specification. (Havels 390SS or Crompton) 1200mm |
| 73 | Suppllying, fitting fixing Exhaust Fanas per approved specification. (Havels or similar quality)225mm |
| 74 | Total |
| 75 | Add CGST @9% |
| 76 | Add SGST @9% |
| 77 | Total |
| 78 | Add Cess @ 1% |
AI Tender Summary
Tender Timeline
Jan 31, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender