Tender For Retender For Pharmacy Store In Trauma And Opd Building At Aiims Rishikesh, rishikesh-Uttarakhand

Retender For Pharmacy Store In Trauma And Opd Building At Aiims Rishikesh - 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 1.1 For fixed portion 1.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 380.00 466.30 177194.00 2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 2.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 40.00 564.80 22592.00 3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 3.1 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) sqm 50.00 1325.55 66278.00 4 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineerin-charge. 4.1 Pre-laminated particle board with decorative lamination on both sides Sqm 10.00 965.10 9651.00 5 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5.1 200x10 mm Each 2.00 90.8 182.00 39 6 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 6.1 125 mm Each 5.00 60.05 300.00 7 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete kg 585.69 78.20 45801.00 8 Ceiling panels & Wall Panels 50mm thick & have a composite construction of Double skins both sides PPGI Sheet(one side 0.8mm thick and another side 0.5mm thick sheet). These two sheets are held together with insulated Puff. The panels are joined to each other with one side male and other side female (Tongue & Glue Type) & all panels joints will be sealed by compressed food grade silicon to insure airtight construction panel thickness 50mm insulating filler material Puff 45Kg/m3 density. Providing corners & joint coving: used to provide smooth & seamless corners coving AL 75 C-Cap, L Section & Z section profiles all are medical grade powder coated. sqm 86.35 4526.80 390889.00 9 Supply of Aluminum conductor XLPE insulated sheath armoured cable of 1.1KV grade conforming to IS:1554 9.1 3.5 x 25 sq. mm metre 150.00 297.00 44550.00 10 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 10.1 Upto 35 sq. mm (clamped with 1mm thick saddle) metre 120.00 55.00 6600.00 11 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 11.1 Group C Point 20.00 1823.00 36460.00 12 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 12.1 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire metre 100.00 369.00 36900.00 12.2 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 150.00 369.00 55350.00 13 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and 40 incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 13.1 4 way (4 + 12), Double door Each 2.00 7512.00 15024.00 14 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 14.1 Single pole Each 24.00 256.00 6144.00 15 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 15.1 63 A TP&N each 2.00 3144.00 6288.00 16 Supplying and fixing suitable size GI/PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. each 30.00 586.00 17580.00 17 Supply of wall mounted LED batten. Luminaire Specifications Power :- 20 - 22 Watts, Driver type (external/internal) :- Internal Voltage :- 240 V AC, 2500 lm Housing :- Aluminum Housing C, Mounting Arrangement :- Surface / Wall Mount System Lumen Output (lm)±10% Ambient Temperature (°C) :- 0-45 POWER FEATURES :- 100 - 150 lm/W IP rating :- 100 - 150 lm/W :- IP20 LED Specifications Light Source :- LED LED Efficacy (lm/W) :- 120 Colour Temperature (K) :- 6500 LED life with L70 criteria :- 25000 - 50,000 Hrs Driver Specifications No. of Drivers / Luminaire :- 1 Efficiency of Driver (%) :- 85% THD (Ithd %) :- <20% Surge Protection (kV) :- 2 Other Details LED CCT Binning :- ANSI Bin C78.377A LED Photo biological safety report :- IEC62471 UVIR radiation :-No Harmful Radiations Electrical Insulation Class :- Class 1 Length :-1.15 m (1150 mm) Warranty :- 2 Year each 20.00 450.00 9000.00 18 Supplying of 36 W, 6000 K surface mounting LED panel 300mm*300mm having system luminous efficacy of not less than 100 im/w complete with white powder coated extruded al. housing, polycarbonate diffuser along with white reflector intregal electronic driver with output short circuit protection, surge voltage protection etc. each 15.00 2250.00 33750.00 19 Supplying of electric 400 millimeter Bracket mounted fan for Wall mounting fan, Motor Type - AC Type of Enclosure of motor and Regulator :- each 10.00 2850.00 28500.00 41 Ventilated Rated Voltage :- 230V AC Speed Control Mechanism:- Rotary Switch,Pull cord or string based control RPM at Maximum Speed :- 1000-1500 Number of Blades 3 Fan Guard :- Yes Watt:- 60 Warranty - 02 years Number of Speed Steps :- 3 Length of Cord with Suitable Plug top:-1.5 meter 20 Supply of Three Phase 415 V energy meter

Refer document

INR 20310.0 /-

INR 10.15 Lakhs /-

Name of Work: Pharmacy store in Trauma & OPD Building at AIIMS Rishikesh

Sl. No.	Item Description
1	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
2	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
3	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
4	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
5	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm
6	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
7	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
8	Ceiling panels & Wall Panels 50mm thick & have a composite construction of Double skins both sides PPGI Sheet(one side 0.8mm thick and another side 0.5mm thick sheet). These two sheets are held together with insulated Puff. The panels are joined to each other with one side male and other side female (Tongue & Glue Type) & all panels joints will be sealed by compressed food grade silicon to insure air-tight construction panel thickness 50mm insulating filler material Puff 45Kg/m3 density. Providing corners & joint coving: used to provide smooth & seamless corners coving AL 75 C-Cap, L Section & Z section profiles all are medical grade powder coated
9	Supply of Aluminum conductor XLPE insulated sheath armoured cable of 1.1KV grade conforming to IS:1554 3.5 x 25 sq. mm
10	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
11	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
12	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
13	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
14	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door
15	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
16	Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 A TP&N
17	Supplying and fixing suitable size GI/PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required
18	Supply of wall mounted LED batten,Luminaire SpecificationsPower :- 20 - 22 Watts, Driver type (external/internal) :- Internal,Voltage :- 240 V AC, 2500 lm,Housing :- Aluminum Housing C,Mounting Arrangement :- Surface / Wall Mount,System Lumen Output (lm)±10%,Ambient Temperature (°C) :- 0-45,POWER FEATURES :- 100 - 150 lm/W,IP rating :- 100 - 150 lm/W :- IP20,LED Specifications,Light Source :- LED,LED Efficacy (lm/W) :- 120,Colour Temperature (K) :- 6500,LED life with L70 criteria :- 25000 - 50,000 Hrs,Driver Specifications,No. of Drivers / Luminaire :- 1, Efficiency of Driver (%) :- 85%,THD (Ithd %) :- <20%,Surge Protection (kV) :- 2,Other Details LED CCT Binning :- ANSI Bin C78.377A, LED Photo biological safety report :- IEC62471,UV\IR radiation :-No Harmful Radiations, Electrical Insulation Class :- Class 1,Length :-1.15 m (1150 mm),Warranty :- 2 Year
19	Supplying of 36 W, 6000 K surface mounting LED panel 300mm*300mm having system luminous efficacy of not less than 100 im/w complete with white powder coated extruded al. housing, polycarbonate diffuser along with white reflector intregal electronic driver with output short circuit protection, surge voltage protection etc.
20	Supplying of electric 400 millimeter Bracket mounted fan for Wall mounting fan Motor Type - AC Type of Enclosure of motor and Regulator :-Ventilated Rated Voltage :-230V, AC Speed Control Mechanism:- Rotary Switch,Pull cord or string based control,RPM at Maximum Speed :- 1000-1500, Number of Blades 3,Fan Guard :- Yes,Watt:- 60,Warranty - 02 years,Number of Speed Steps :- 3,Length of Cord with Suitable Plug top:-1.5 meter,
21	Supply of Three Phase 415 V energy meter