|
| 1 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge.A) In cement mortar |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m.a) All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :a)1:5:10 (1 cement : 5 coarse sand (zone-III) derived from naturalsources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Providing and laying factory made Precast concrete solid blocks of200 mm thickness of grade M10 made of C&D waste from approvedmanufacturer in foundation and plinth in:a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | 12 mm cement plaster :a)1:6 (1 cement : 6 coarse sand) |
| 6 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :a)1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) |
| 7 | Centering and shuttering including strutting, propping etc. and removalof form work for :a)Foundations, footings, bases for columns |
| 8 | Supplying at site Angle iron post & strut of required size includingbottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10 mm dia. etc. complete. |
| 9 | Fencing with angle iron post placed at required distance embeddedin cement concrete blocks, every 15th post, last but one end postand corner post shall be strutted on both sides and end post on oneside only and provided with horizontal lines and two diagonalsinterwoven with horizontal wires, of barbed wire weighing 9.38 kg per100 m (minimum), between the two posts fitted and fixed with G.I.staples, turn buckles etc. complete. (Cost of posts, struts, earthwork and concrete work to be paid for separately). Payment to bemade per metre cost of total length of barbed wire used.a) With G.I. barbed wire |
| 10 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :a) Two or more coats on new work |
| 11 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). |
| 12 | Manufacturing, supplying and fixing retro reflective signage boards made up of 4 mm thick aluminium Composit material Sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D- 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in vertical rows along with theft resistant measures, including the cost of paintingwith two or more coats of epoxy paint in grey colour on the back side of ACP sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as perdrawings, specification and direction of the engineer-incharge.(Structural frame work to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 13 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m.a) All kinds of soil |
| 14 | Finishing walls with water proofing cement paint of required shade :a)New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 15 | Removal/ Disposal of refuse/malba/ garbage of all types including loading /unloading and transporting for 5 km lead and 1.5 m lift complete as per the direction of engineer -in- charge. |
| 16 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.A) In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works |
| 17 | Providing and fixing of CHAIR TYPE R.C.C. BENCH WITH ARM of Make K.K/ LEO/ SURABH/ ARZOO/R.D or equivalent as approved by Engineer-in-charge. The precast concrete benches (chair type) manufactured by using M-25 grade concrete, & reinforcement suitably to prevent damage during handling, transportation and erection and long use. The benches consists of 2 nos. L shape base support in cement colour (thickness-80 mm., back hight- 890 mm.. front height-450 mm. and base width-690 mm.) and one No. reinforced concrete plank in red colour of size 1500mm. x400 mm. x 50mm. and one No. of reinforced concrete plank in red colour ot size 1500mm.x425mm.x50mm. The parts are jointed together with galvanized nuts & bolts. Seating length of bench - 1500mm. seating height of bench-450 mm. total height of the bench-890mm. Bench top and back are treated with special anti-corrosive, water proof coating so as to make surtaces glossy and water proof. All component of each bench are manufactured by using M-25 grade of concrete using vibro compaction process. The complete item fixed at site as required including GST, transportation etc Complete and as per direction of Engineer in charge. |
| 18 | Supplying and fixing swing type heavy duty with M.S frame PVC dustbin(twin)of make sheetal, supreme, Neel Kamal, or equipment as approved by Engineer in Charge on stand having capacity of 150 liters and dimensions as (L x W x H) 505mm x 445mm x 690mm each including fixing with C.C 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) M.S. frame & painting writing etc. complete as per drawing and direction of engineer-in-charge (Payment for excavating holes and C.C 1:2:4 to be paid separately) |
