Tender For Construction Of 70 Bedded Boys Hostel, Mu.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Feb 2023
0 days left
EMD
76550
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal East → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 70 Bedded Boys Hostel, Mu.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of septic tank and ground water reservoir Pipeline Fitting and Sanitary Item and Flooring of courtyard with Interlocking Pavement |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres |
| 3 | (a) Hard/Dense Soil. |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre |
| 5 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering |
| 6 | (a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | (b) 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : |
| 9 | (b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 10 | Reinforced cement concrete work in walls (any thickness) i/c attached pilasters, buttresses, plinth and string courses, fillets etc. upto floor two level i/c finishing and plastering the exposed surface with cement mortar (1:3) (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 11 | (b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with |
| 13 | (a) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 14 | Steel reinforcement for R.C.C work including straightening, cutting, bending,placing in position and binding all complete |
| 15 | (b) Thermo-Mechanically Treated bars |
| 16 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in |
| 17 | (a) Foundation, footings, bases of columns etc. and mass concrete. |
| 18 | (b) Flat surface such as suspended floor, roofs landings and the like |
| 19 | 2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 coarse sand) |
| 20 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure. |
| 21 | 75 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement. |
| 22 | 12 mm cement plaster 1:3 (1 cement: 3 coarse sand). |
| 23 | Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. |
| 24 | c) Uchan/Tairen/Tolhao/Khangra. |
| 25 | Corrugated G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8 mm dia G.I. limpet & bitumen washer complete, excluding the coat of purlins rafter & trusses. |
| 26 | Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position |
| 27 | a) Local best quality Uningthou |
| 28 | P/F 40 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws. |
| 29 | a) First class Uningthou wood |
| 30 | Distempering (two or more coats) with oil bound washable distemper of approved quality on new work i/c priming coat to hive an even shade. |
| 31 | Finishing walls with water-proofing cement paint of approved quality on new work (two or more coats) to given shade. |
| 32 | Painting two coats (excluding priming coat) with chocolate, red, grey of buff paint approved quality on new steel or wood work. |
| 33 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge |
| 34 | (a) 110mm dia |
| 35 | (b) 75 mm dia |
| 36 | Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc. |
| 37 | Providing and fixing 100x100x100x100 mm Rigid PVC(Tee with Door) branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete. |
| 38 | Providing and fixing 110 mm (Rigid PVC Bend 87.5 degree ) plain bend of required degree. |
| 39 | Providing and fixing 110 mm (Rigid PVC coupler) collar |
| 40 | Providing and fixing 110 mm (Door cap) terminal guard. |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 42 | External work |
| 43 | (a) 32 mm nominal outer dia Pipes |
| 44 | (b) 40 mm nominal outer dia Pipes |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 46 | Concealed work, including cutting chases and making good the walls etc. |
| 47 | (b) 20 mm |
| 48 | ( c) 15 mm |
| 49 | Making connection of GI distribution branch with GI main 25 mm to 40 mm diameter by providing & fixing Tees i/c cutting and threading the pipe etc complete. |
| 50 | Providing and fixing brass full way G.M valve with CI wheel of superior quality. |
| 51 | (a) 32 mm diameter |
| 52 | Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. |
| 53 | (a) 1000 litres net capacity storage tanks |
| 54 | Constructing masonry chamber 30 x 30 x 50 cm inside with 2nd class brick work (local first class) in cement mortar 1:5 (1 cement : 5 fine sand) for stop cock with C.I. surface box 100 x 100 x 75 mm (inside) with hinged covers fixed in cement concrete slab 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 course sand) |
| 55 | Providing and fixing C.P. bib cock of superior quality. |
| 56 | (b) 20 mm diameter (Delux Sona) |
| 57 | Providing and fixing brass stop cock of superior quality. |
| 58 | (b) 25 mm diameter |
| 59 | Providing and fixing C.P. brass shower rose with 12.5 mm or 19 mm inlet |
| 60 | (a) 100 mm diameter |
| 61 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 62 | (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 63 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 64 | (a) W.C. pan with ISI marked white solid plastic seat and lid |
| 65 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 66 | (a) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. |
| 67 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 68 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively |
| 69 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 70 | Providing and fixing 600 x120 x 5 mm glass shelf (Indian make) with C.P. brass brackets guard nail complete fixed to wooden cleats with C.P. brass screws. |
| 71 | Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P.brass screws |
| 72 | Providing and fixing C.P. brass toilet paper holder |
| 73 | Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws. |
| 74 | C.P Towel Ring |
| 75 | 1 HP water pump |
| 76 | Flooring of courtyard with Interlocking Pavement. |
| 77 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 metres in width as well as 10 sqm on plan i/c disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposal soil to be levelled and neatly dressed in |
| 78 | (B) Hard/Dense Soil. |
| 79 | Brick edging (brick laid on edge) in plinth protection with 2nd class brick local first class) i/c grouting with cement mortar 1:4 (1 cement: 4 fine sand). |
| 80 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design /shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand,filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge. |
| 81 | Stonne Aggregate |
| 82 | (i) 6 mm & below |
| 83 | Development of Compound and approach road and entrance culvert. |
| 84 | Earth work in rough excavation banking excavated earth in layer not exceeding 20cm depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammer rolling every third and topmost layer with power roller of minimum 8 tonne and dressing up embankment for roads, floods banks guide banks and filling up ground, depression lead upto 50 metres and lift upto 1.5 m in ( i/c carriage charge ) |
| 85 | (a) Hard/Dense soil |
| 86 | Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( without carriage charge of all materials) |
| 87 | Brick edging (brick laid on edge) in plinth protection with 2nd class brick local first class) i/c grouting with cement mortar 1:4 (1 cement: 4 fine sand). |
| 88 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design /shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand,filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge. |
| 89 | Approach road and culvert |
| 90 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres |
| 91 | (b) Hard/Dense Soil. |
| 92 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering |
| 93 | (g) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 94 | 2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 coarse sand) |
| 95 | 40 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement. |
| 96 | 12 mm cement plaster 1:3 (1 cement: 3 coarse sand). |
| 97 | Reinforcement for R.C.C. work i/c bending ,binding and placing complete. Tor Steel |
| 98 | (b) Tor-steel bars |
| 99 | Reinforced cement concrete M 20 mix with stone aggregate 20 mm nominal size mechanically mixed and vibrated for bed plates excluding steel reinforcement, but including centering and shuttering laid in position. |
| 100 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in |
| 101 | (b) Flat surface such as suspended floor, roofs landings and the like |
AI Tender Summary
Tender Timeline
Jan 31, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender