Military Engineer Services-MES has published Tender For Special Repairs Of Perimeter Security Wall 900 Mtr Along With Swan Neck Barbed Wire And Concertina Coil With Iron Angle Of Age B / R Dett-A Under Ge 862 Ews. Submission Date for this Tender is 27-02-2023. Fencing Wire Tenders in Rajouri Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Feb-2023 | Corrigendum1 | BOQ | 20-02-2023 |
| 2 | 20-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-02-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 2 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water et,c complete all as specified and directed. |
| 3 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed. |
| 4 | M&L for Brick work with sub class "B" bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4, complete all as specified and directed. |
| 5 | Description all as per item No. 04 above but except Bricks NOTE: Old brick retrieved from demolition shall be used. |
| 6 | M&L for rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick work, finished the surface even and smooth without using extra cement including water proofing compound as per manufracturer"s instructions, finished even and smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick on fair faces of brick wall or concrete surfaceincement mortar 1:4, mixed with and including water proofing compound as per manufracturer"s instructions, finished even and smooth without using extra cement, complete all as specified and directed. |
| 8 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash, complete all as specified and directed. |
| 9 | Demolition and breaking up drain pipes (Salt glazed stone ware, AC or reinforced concrete / PVC pipe) set in cementmortar 100/110mm bore, complete all as specified and directed. |
| 10 | M&L for 110 mm bore PVC (SWR) pipes single socketed in any length laid in trenches with rubber ring joints or in floor, or as in weep hole, complete all as specified and directed. |
| 11 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for , complete all as specified and directed. |
| 12 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 13 | M&L for mild steel TMT bars 5 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 14 | M&L for reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in columns, pillars, piers, post, struts similar work, complete all as specified and directed. Note: Reinforcement shall be measured and paid for separately. |
| 15 | Dismanting wrought iron or mild steel work of any description not otherwise provided, complete all as specified. |
| 16 | M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in apex stone, lintel upto 1.5m, coping, benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work ,complete all as specified and directed. |
| 17 | Mild steel work as inY shaped angle iron horn in posts and struts in fencing including cutting and bending to shape required, drilling holes, notching for wire, and fixed for position etc complete conforming to Fe-410-0 or Gde E-130,complete all as specified and directed. |
| 18 | S&F for galvanised, 2 strand, steel barbedwire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed. |
| 19 | M&L for preparation of new steel surface exc 10 cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Chagre. |
| 20 | S&F for concertina coil 600 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed. |
| 21 | M&L forframed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290, Gde E-165 complete in and including painted with one shop coat of zinc chromate red oxide primer with preparation of surface all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
