Installation Of Submersible Pump With Pvc Tank Infront Of House Of Narayan Biswas Gram Sansad-17 , Mouza- Kendua, Jl No-213, Plot No-171, Bulbulchandi Gp
Tender Value
2.79 Lakhs
Estimated cost
Bid Submission
03 Feb 2023
0 days left
EMD
5600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
habibpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Submersible Pump With Pvc Tank Infront Of House Of Narayan Biswas Gram Sansad-17 , Mouza- Kendua, Jl No-213, Plot No-171, Bulbulchandi Gp
BOQ
| Sl. No. | Item Description |
| 1 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.(i) 50 mm dia. |
| 2 | (ii) 100 mm dia. |
| 3 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 4 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete. |
| 5 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (a) 25 mm. Dia. |
| 6 | (b) 40 mm. dia. |
| 7 | (c) 50 mm. dia. |
| 8 | (d) 100 mm. dia. |
| 9 | Supplying fitting and fixing of P.V.C. reducing socket with ISI mark. (a)100mmX50mm. |
| 10 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (ii) 50 mm dia. |
| 11 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(ii) 50 mm dia. |
| 12 | Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm. (v) 40 mm |
| 13 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and naje tested to 21 kg/sq.m. (vii) 25 mm dia |
| 14 | Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.(i) 15 mm |
| 15 | Supplying and installation of K.S.B Sub-mersible pump including conecting cable panel etc. all complete.i) 1.50 H.P capacity ( Single phase ) |
| 16 | Supply and control panel made of 16 SWG M.S. sheet phosphate powder Dust & Vermin proof consist of following (internal wing complete) (i) 40 mm dia. (M), (a) 32 Amp. DPMCB (HAVELL\"s) Standard)…… 1 No. (b) Contractor (20A/22A) (SIMENS)………… 1 No. (c)Overload Relay (suitable Range Considering Motor current of SIMENS make)…………….. 1 No. (d) Start & Stop Push button (Red & Green)……1 No.(e) Start Capacitor…………………. 1 No. (f) Running Capacitor……………… 1No. (g) Voltmeter-100 sq. mm. dia. (0.300 V) make AI.. 1no. (h) Ammeter- 100 sq.mm. dia. (0.30A) Make AE….. 1 No. (i) HRC fuse 30A/32A approved make inter connecting wire of suitable gague (HAVELL\"s)……………… 1 No. |
| 17 | Supply, fitting & fixing of 3 core 2.5 mm 2 flat Copper Copper Submersible cable (make FINOLEX/ HAVELL\"s) |
| 18 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. (b) 1000 litre capacity |
| 19 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 20 | Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L. |
| 21 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 22 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of sand. |
| 23 | Single brick flat soling of picket jhama bricks including ramming & dressing bed to proper level & filling joints with powdered earth or local sand. |
| 24 | (III) Cement concrete with 32 mm down graded gravel excluding shuttering. In ground floor. (A) Pakur Variety.(a) 1:3:6 proportion. |
| 25 | Brick work with 1st class bricks in Cement morter (1:6) (a) In foundation and plinth |
| 26 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) |
| 27 | A) Ordinary Cement Concrete (mix 1 :1.5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any,as per relevant IS codes. |
| 28 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (f) 25 mm to 30 mm shuttering without staging in foundation.For Sub-Structure. |
| 29 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of E-I-C. For Super-Structure. |
| 30 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (SAIL / TATA / RINL / JSPL) |
| 31 | Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tilem& finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white |
| 32 | (B) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white. |
| 33 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar..Complete A. i) With 1:6 cement mortar (c) 15 mm. thick plaster. |
| 34 | B.ii) With 1:4 cement mortar (c) 10 mm. thick plaster. |
| 35 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same throughly…….(iii) Two Coats. |
| 36 | Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with joining materails ( Spun Yarn, Valamoid / Bitumen/ M-Seal etc.) complete A) UPVC Pipes:(i) 75 mm dia |
| 37 | (c) Bend 87.5 degree (i) 75 mm dia |
| 38 | Supplying, Fiting & Fixing upperbed system vertical Microfilter Cylindrical Multigrade Sand Filter of dia 800 - 1000 mm type of shell thickness 6 mm height 1800 mm (flanch to flanch ) of capacity 1000 LPH including dish end and --- 8 mm thicklk with one Handle hole and necessary valves and air vent & filing of filter media etc all complete. |
| 39 | Quotation fee for WBSEDCL Connection |
| 40 | Add GST @ 18% |
| 41 | Add Cess @ 1% |
AI Tender Summary
Tender Timeline
Jan 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender