|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of sand. |
| 4 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 5 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including |
| 6 | Cement concrete with graded stone ballast (32 mm. size) excluding shuttering. |
| 7 | Brick work with 1st class bricks in cement mortar (6:1) |
| 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) |
| 9 | Ordinary Cement Concrete (mix 1 :1.5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any,as per relevant IS codes. |
| 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. |
| 11 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (SAIL / TATA / RINL / JSPL) |
| 12 | A) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar..Complete A. i) With 1:6 cement mortar (c) 15 mm. thick plaster. |
| 13 | B.(i) With 1:6 cement mortar (b) 20 mm. thick plaster |
| 14 | C.ii) With 1:4 cement mortar (c) 10 mm. thick plaster. |
| 15 | Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc. in all floors about 1.5 mm thick |
| 16 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same throughly……. |
| 17 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.In ground floor. |
| 18 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or bothfaces of M.S./ W.I. gate etc. with point welding at not more than150mm apart complete in all respect as per design including cost of all labour and materials. |
| 19 | Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with joining materails ( Spun Yarn, Valamoid / Bitumen/ M-Seal etc.) complete [ Page-212, Item<21(ii)>] A) UPVC Pipes:(i) 75 mm. Dia. |
| 20 | B) UPVCFittings (c)Bend 87.5 degreei) 75 mm. Dia. |
| 21 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing)(ii) 580mm x 440 mm |
| 22 | Supplying, fitting and fixing cast iron \"P\" or \"S\" trap conforing to I.S 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed (A) \"P\" trap(iii) 100 mm |
| 23 | Supplying , fitting and fixingFlat Back urinals of approved quality in position…………..etc complete.. |
| 24 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.. (a) C.P. urinal flush pipe fittings range of one |
| 25 | Supplying, fitting and fixing Squating plate with integral flushing in white vireous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid separately). |
| 26 | Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia R.C.C manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100 mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below G.I floor finished with 25 mm thick gray artificial(A) With Pakur Variety(i) For 10 users |
| 27 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S 3989 /1970 and I.S 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary…..(a) With valamoid hoints including seraling with sand cement morter (4:1) upto quarter depth. (ii) 100 mm dia (Internal) |
| 28 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (iii) 50 mm dia.[ Page-64, Item<9, iii>] |
| 29 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories,(ii) CPVC Pipes Class-2,SDR-13.5 (A)15 mm. dia. |
| 30 | (B) 20 mm dia. |
| 31 | Supplying, fitting and fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make , spray painted and tested to 21 Kg per sq, cm.(i) 15 mm dia |
| 32 | Supplying P.V.C water storage tank of approved quality with closed top with lid (Black) - Multilayer. i) 500 Litre capacity |
| 33 | Add GST @ 18% |
| 34 | Add Cess @ 1% |
