Tender For Annual Rate Contract For Lowering And Unlowering Of Motor Pump Sets From Ow Tw And Rewinding Repairing Of Submersible Motor Pump Under Jurisdiction Of Phed Div Sadulpur
Tender Value
6 Lakhs
Estimated cost
Bid Submission
06 Feb 2023
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sadulpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Rate Contract For Lowering And Unlowering Of Motor Pump Sets From Ow Tw And Rewinding Repairing Of Submersible Motor Pump Under Jurisdiction Of Phed Div Sadulpur
BOQ
| Sl. No. | Item Description |
| 1 | Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer\"s specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring, vent plug, water drain plug, etc. complete job |
| 2 | Above 5HP to 7.5 HP V-6 |
| 3 | Above 7-5 HP to 10 HP V-6 |
| 4 | Above 10 HP to 12.5 HP V-6 |
| 5 | Motor opening cable jointing & refitting charges when rewinding is not required. |
| 6 | V-6 |
| 7 | Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves |
| 8 | V-6 |
| 9 | Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing. |
| 10 | V-6 |
| 11 | Replacement of thrust plate for all types of motors |
| 12 | V-6 |
| 13 | REPAIR OF SUBMERSIBLE PUMP |
| 14 | Supply and fixing spare parts for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys etc. complete. |
| 15 | Providing & fixing of GM neck rings parts on impeller. |
| 16 | Plain Type V-6 |
| 17 | Providing & Fixing of GM/SS bush per piece |
| 18 | Plain Type V-6 |
| 19 | Providing & replacement of Nylon Impeller |
| 20 | Plain Type V-6 |
| 21 | Providing & fixing CI Diffuser/ guide vans per piece |
| 22 | V-6 |
| 23 | Providing & fixing Nylon Diffuser/ guide vans per piece |
| 24 | V-6 |
| 25 | Providing & fixing Microlone Guide per piece |
| 26 | V-6 |
| 27 | Providing & fixing of CI body per piece |
| 28 | Plain Type V-6 |
| 29 | Pump opening & fixing including machining & all finishing work for desired performance |
| 30 | Plain Type V-6 |
| 31 | Impeller welding & turning (if not replaced) |
| 32 | Plain Type V-6 |
| 33 | Unlowering of submersible pump set along with lowering pipes with depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set, transportation of pump set from tube well site to storeas direction,receiving repaired / new pump set from store/ divisional store , testing the same, transportation tosite and lowering back into tube well along with submersible cable, lowering pipes,specials etc and commissioning of the tube well. The job also includes cable jointing,checking of discharge of pump set,interconnection of lowering pipe from nearby distribution pipe line,checking of starter and reporting for completion of Job or fault/problem if any.(Upto 20 Km distance run by lowering machine) |
| 34 | For three Phase pump set |
| 35 | G.I. Double Flanged Pipe Lowering Assembly of nominal dia |
| 36 | 50 mm |
| 37 | 65 mm |
| 38 | 80 mm |
| 39 | Add above item 1.1 for distance run above 20 Km for each 5 Km distance run. |
| 40 | Only unlowering of submersible pump set along with lowering pipes depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set,reporting and transportation of pump set from tube well site to storeas per direction. |
| 41 | For three phase pump set |
| 42 | G.I. Double Flanged Pipe Lowering Assembly of nominal dia |
| 43 | 50 mm |
| 44 | 65 mm |
| 45 | 80 mm |
| 46 | Add above item 2.1 for distance run above 20 Km for each 5 Km distance run. |
| 47 | Only lowering of the submersible pump setinto tube well along with submersible cable, lowering pipes depth up to 120 mtr,specials etc and commissioning of the tube well. The job also includes cable jointing,checking of discharge of pump set,interconnection of lowering pipe from nearby distribution pipe line,checking of starter and reporting for completion of Job or fault/problem if any. |
| 48 | For three phase pump set |
| 49 | G.I. Double Flanged Pipe Lowering Assembly of nominal dia |
| 50 | 50 mm |
| 51 | 65 mm |
| 52 | 80 mm |
| 53 | Add above item 3.1 for distance run above 20 Km for each 5 Km distance run. |
| 54 | G.I. Double Flanged Pipe Lowering Assembly of nominal dia |
| 55 | 50 mm |
| 56 | 65 mm |
| 57 | 80 mm |
| 58 | Add above item for distance run above 20 Km for each 5 Km distance run. |
| 59 | Unlowering of pump set along with lowering pipes and submersible cable with safety from Openwell For three Phase pump set having G.I double flanged/ HDPEpipe lowering asembly of size 50 mm to 80 mm, checking the pump set,reporting and transportation of pump set from tube well site to store. |
| 60 | Add above item for distance run above 20 Km for each 5 Km distance run. |
| 61 | Lowering of repaired/Newpump set alongwith lowering pipes and submersible cable with safety in Openwell For three Phase pump sethaving G.I double flanged/ HDPEpipe lowering asembly of size 50 mm to 80 mm. It includes receiving repaired / new pump set from store / Work shop with in boundry area of division and testing the same, transportation tosite and commissioning. |
| 62 | Add above item for distance run above 20 Km for each 5 Km distance run. |
AI Tender Summary
Tender Timeline
Jan 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender