Tender For Construction Of Additional Roams For Hppwd, Sub Division Bharmour In Tehsil Bharmour District Chamba (H.P.)
Tender Value
14.22 Lakhs
Estimated cost
Bid Submission
06 Feb 2023
0 days left
EMD
28500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bharmour → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional Roams For Hppwd, Sub Division Bharmour In Tehsil Bharmour District Chamba (H.P.) Building Portion Water Supply And Sanitary Installation Etc
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m (one decimal five metre), including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock as per direction of Engineer – in- Charge including carriage of materials within all leads and liftsand other incidental . The rateincludingoctroi,royality, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 2 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work infoundation, footing, basis of columns etcetra and mass concrete including all taxes,GST,carriage ofmaterialwithin all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 3 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in planincluding all taxes,GST,carriage ofmaterialwithin all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 4 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights including all taxes,GST,carriage ofmaterialwithin all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 5 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thicknessincluding all taxes,GST,carriage ofmaterialwithin all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 6 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including all taxes,GST,carriage ofmaterialwithin all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 7 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size)curing completeexcluding the cost of form work in all work up to plinth levelincludingall taxes,GST, carriageofmaterial, within all leads, liftsand other incidentals as per the direction of the Engineer-in-chargeand as per specification, approvedDrawing & Design complete. |
| 8 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (one cement six coarse sandincludingall taxes,GST, carriageofmaterial, within all leads, liftsand other incidentals as per the direction of the Engineer-in-chargeand as per specification, approvedDrawing & Design complete. |
| 9 | Stone soling/boulder filling dry hand packed in under flooras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 10 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing completeincluding all taxes,GST ,carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 11 | Providing and laying upto floor level reinforcement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less than 400 Kilogram (four hundred kilograms) michanically mixed and vibrated including curing complete but excluding the cost of reinforcement , centering, shuttering upto plinth level, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. |
| 12 | Providing and laying upto floor level reinforcement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less than 400 Kilogram (four hundred kilograms) michanically mixed and vibrated including curing complete but excluding the cost of reinforcement , centering, shuttering in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. |
| 13 | Reinforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less than 400 Kilogram (four hundred kilograms) michanically mixed in beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, huttering, finishing and reinforcement as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor all level.as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)insuperstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 ( one cementisto six coarse sand)completeincludingall taxes and carriageofmaterial, as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 16 | Half brick masonry with common burnt clay F.P.S.(non modular)bricks of class designation 7.5 ( seven point five)insuperstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 ( one cementistofour coarse sand)completeincludingall taxes and carriageofmaterial, as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (twelve) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3Kilogram per sqm, including pointing in white cement mixed with pigment of matching shade complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 18 | Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position. 2nd (second) class deodar wood. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 19 | Providing and fixing 40mm thick (forty millimetre) panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws with 2nd class deodar wood.. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 20 | Providing and fixing M.S. plain grills 10x10mm (ten intotenmillimetre)squareor roundbarsin combinationof20x4mm (twentyintofourmillimetre)M.S.flat as per detailof required pattern inframes of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 21 | Providing and fixing 40 mm (fortymillimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five Gauge) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windowsincludingwith necessary screws completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm (Thirty five millimeter) thick including ISI marked Stainless Steel butt hinges with necessary screws as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 23 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm (one decimal twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20 mm (twenty millimeter) diaas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 24 | Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 250 X 10 mm (two hundredfiftyinto ten millimetre)as directed bytheEngineer-in-Charge, including carriageof material within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 25 | Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 150 X 10 mm (One hundredfiftyinto ten millimetre)as directed bytheEngineer-in-Charge, including carriageof material within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 26 | Providing and fixing aluminium handles 125 mm (One hundred twenty five millimetre) anodized transparent or dyed to required colour and shadewith necessary screws etcetera complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental and furtheras perspecification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government |
| 27 | Providing and fixing aluminium handles 100 mm (One hundred millimetre) anodized transparent or dyed to required colour and shadewith necessary screws etcetera complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental and furtheras perspecification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government |
| 28 | Providing and fixing 250x16x5 mm ( two hundred fifty into sixteen into five millimetre) bright finished brass door latch with necessary screws etc. completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 29 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 30 | Providing and fixing aluminium die cast bodytubular type universal hydraulic door closer (havingbrand logo with ISI, IS : 3564, embossed on thebody, door weight upto 35 Kilogram ( thirty kilogram)and door width upto700 mm ( sevenhundred millimetre) , with necessary accessories and screwsetcetera complete oras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 31 | Providing and fixing 300 mm (three hundred millimetre) weighing not less than 330 gms (three hundred thirty)bright finished brass casement stays (straight peg type) with necessary screws etc. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 32 | providing and laying 40mm (forty millimetre) Cement concrete flooring 1:2:4 (1 cement :isto 2 coarsesand :isto4 graded crushed stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 33 | Providing and laying 25 mm (twenty five) wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 34 | Providing and laying vitrified floor tiles double chargedsize of600 x 600 mm ( six hundredinto six hundred millimetre)of Kazaria/ Somany/ jonhson/Orient-Bell in flooring (thickness to be specified by the manufacturer) with water absorption less than0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thickcement mortar 1:4( onecementisto fourcoarse sand),jointing with grey cement slurry @ 3.3 Kilogram/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement andmatching pigments etceteracomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 35 | Providing & laying25 mm ( twenty five millimetre) thick Kota stonesingle slab flooringin treads of stepsor riser ofstepshavingsemi/ roundnosing over 20 mm ( twenty millimetre)(average) thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab, with baseof cement mortar 1 : 4 ( one cement fourcoarse sand) including rubbing and polishing completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 36 | Providing andfixingnon slipperyCeramicfloor tiles ofKazaria/ Somany/ jonhson/Orient-Bell ofsize 300x300 mm ( three hundredinto three hundred millimetre)(thickness to be specified by themanufacturer), of 1st quality conforming to IS :15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laidon 20 mm ( twenty millimetre)thick bed of cement mortar 1:4 (oneCementisto four Coarse sand), jointing with grey cement slurry @ 3.3 Kilogram/ sqm ( three point three kilogramper square metre) including pointing the jointswith white cement and matching pigments etceteracomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government |
| 37 | 6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( onecement isto three sand) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 38 | 15mm (Fifteenmillimetre) thick cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (onecement isto sixsand) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 39 | Applying priming coatofover new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink or Gray as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 40 | Painting two or more coats of Asian/Nerolac (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 41 | Applying Birla white/J.Kwall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matterfinishto the surface complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government |
| 42 | Finishing walls with 100% (one hundres percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 43 | Distempering (two coats) withoil bound washable distemper ofapproved brand and manufactureof and of required shade ofundecorated wall surfaces togive an even shade over andincluding a priming coat withAlkali-resistance primer of approved brand and manufactureafter thoroughly brushing thesurface free from mortar dropping and other foreignmatter and also includingpreparing the surface even andsand papered smooth as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 44 | Painting two or more coatof Asian / nerolac (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter withenamledpaintother than whiteas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 45 | Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating ofTATADurashine / SAIL/ RELIANCE/ ZINDALSTEELincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 46 | Providing and fixing flat pressed 3 (three) layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc.complete (frame work to be paid separately) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 47 | Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coatingandback coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating of TATADurashine / SAIL/ RELIANCE/ ZINDALSTEELincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as requiredas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 48 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 49 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trussesandtrussespurlinsin buildingasas per approved drawing, design & specification or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, sale tax,GST or anyother taxes imposed by the Government . |
| 50 | Providing and fixing 20 mm (20 millimetre) dia nominal bore (twenrty millimetre) G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, sale tax,GST or anyother taxes imposed by the Government . |
| 51 | Providing and fixing 25 mm (twenty five millimetre) dia nominal bore (twenrty five millimetre) G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, sale tax,GST or anyother taxes imposed by the Government . |
| 52 | Providing and fixing 1216 (16 mm OD) pipe Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbonblack having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one metre) spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 53 | Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm (twenty to forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 54 | Construction chamber with 100 mm thick walls of brick masonry in cement mortar 1:5(1 cement: 5 sand)300mm x 300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 (1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 55 | Providing and fixing vitrious china duel purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm (fortymillitre)flush bend, 20 mm (twenty millimatre) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 56 | Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hindred eighty into four hundred forty millimetre)with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 57 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (one metre) long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. and as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 58 | Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm (five hundred fifty into four hundred millitre)with single 15 mm (fifteen millimetre) C.P. brass pillar tap wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm (thirty two millitmetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 59 | Providing and fixing Waste coupling 31 mm (thirty one millimetre) dia of 79 mm length and 62mm breadth weighing not less than 45 gms PTMT Waste Coupling for wash basin and sink, of approved quality and colour. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 60 | Providing and fixing vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 61 | Providing and fixing 32mm (thirty two millimetre) dia M.I. Union for wash basin or sinkas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 62 | Providing and fixing CP Brass 32mm (thirty two millimetre) size Bottle Trap of approved quality & make and as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 63 | Providing and fixing 600x450 mm (six hundred into four hundred fiffty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.Providing and fixing mirror of superior glassas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 64 | Providing and fixing 600 mm (six hundred millimetre) long towel rail with total length of 645 mm,(six hundred forty five) width 78 mm (seventy eight millimetre) and effective height of 88 mm, weighing not less than 190 gms. PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colouras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 65 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty in to five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc complete.as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 66 | Providing and fixing toilet paper holder C.P. brass as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 67 | Providing and fixing PTMT liquid soap container 109 mm (one hundred nine millimetre) wide, 125 mm (one hundred twenty five millimetre) high and 112 mm (one hundred twelve millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms (one hundred five). as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 68 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than106 gms.as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 69 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 .as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 70 | Providing and fixing 15mm (fifteen millimetre) C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 71 | Providing and fixing 15 mm nominal bore brass stop cock of approved quality as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 72 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 73 | Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with brass unions as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 74 | Providing and fixing 32mm (thirty two millimetre) C.P. brass chain and rubber plug complete for sink or wash basin: as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 75 | Providing and fixing 15 mm (fifteen millimetre) nominal bore (fifteen millimetre) ball valve (brass) of approved quality, High or low pressure, with plastic floats completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 76 | Providing and fixing 20 mm (twenty millimetre) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 77 | Providing and fixing 25 mm (twenty five millimetre) nominal boreball valve (brass) of approved quality, High or low pressure, with plastic floats completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 78 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 79 | Providing and fixing 110 mm X 90 mm.(one hundred ten into ninety millimetre) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 80 | Providing and fixing 110 mm dia.(one ehundred ten millimetre) high pressure PVC spigot and socket, waste and ventilating pipes ISImarked including fixing with approved adhesive etc. complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 81 | Providing and fixing 150 mm dia.(oneehundred fifty) high pressure PVC spigot and socket, waste and ventilating pipes ISImarked including fixing with approved adhesive etc. complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 82 | Providing and fixing 110 mm (one hundred ten millimetre) dia.PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 83 | Providing and fixing 110 mm (one hundred ten millimetre) dia. PVC door bend with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 84 | Providing and fixing 110 mm (one hundred ten millimetre) dia. PVC collars ISI marked including fixing with approved adhesive etc. complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 85 | Providing and fixing 110 mm (one hundred ten millimetre) dia. PVC plain bend ISI marked including fixing with approved adhesive etc. complete.PVC plain bend ISI marked including fixing with approved adhesive etc. complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 86 | Providing and fixing 110 mm (one hundred ten millimetre)dia. PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 87 | fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm three hundred into three hundred) size (inside) the weight of cover to be not less than 4.50 Kilogram (four decimal fifty Kilogram) and frame to be not less than 2.70 Kilogram as per standard design:as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 88 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : is to one point five coarse sand (zone- III) : 3 graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand(zone- III)8 (eight) graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size finished with a floating coat of neat cement complete as per standard designas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
| 89 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty into three hundred eighty in to three hundred fifty millimetre) with 5 letre white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and makinggood the walls and floors wherever required as per standard designas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes |
AI Tender Summary
Tender Timeline
Jan 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender